Panasonic Network Card 2SB1463G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SB1463G  
Silicon PNP epitaxial planar type  
For high breakdown voltage low-noise amplification  
Complementary to 2SC2440G  
Features  
High collector-emitter voltage (Base open) VCEO  
Low noise voltage NV  
SS-Mini type package, allowing downsizing of the equipment and  
automatic insertion through the tape packing.  
Package  
Code  
SSMini3-F3  
Marking Symbol: I  
Pin Name  
1. Base  
2. Emitter  
3. Collector  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
Rating  
150  
Unit  
V
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
150  
V
5  
V
Collector current  
IC  
ICP  
PC  
Tj  
50  
mA  
mA  
mW  
°C  
Peak collector current  
Collector power dissipation  
Junction temperature  
Storage temperature  
100  
125  
125  
Tstg  
55 to +125  
°C  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCEO  
VEBO  
ICBO  
Conditions  
Min  
150  
5  
Typ  
Max  
Unit  
V
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector-base cutoff current (Emitter open)  
Forward current transfer ratio *  
Collector-emitter saturation voltage  
Transition frequency  
IC = −100 µA, IB = 0  
IE = −10 µA, IC = 0  
V
VCB = −100 V, IE = 0  
VCE = −5 V, IC = −10 mA  
1  
330  
1  
µA  
hFE  
130  
VCE(sat) IC = −30 mA, IB = −3 mA  
V
fT  
VCB = −10 V, IE = 10 mA, f = 200 MHz  
200  
4
MHz  
pF  
Collector output capacitance  
Cob  
VCB = −10 V, IE = 0, f = 1 MHz  
(Common base, input open circuited)  
Noise voltage  
NV  
VCE = −10 V, IC = −1 mA, GV = 80 dB  
150  
mV  
Rg = 100 k, Function = FLAT  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
R
S
hFE  
130 to 220  
185 to 330  
Publication date: May 2007  
SJC00388AED  
 
1
This product complies with the RoHS Directive (EU 2002/95/EC).  
SSMini3-F3  
Unit: mm  
1.60 +00..0035  
0.26 +00..0025  
3
1
2
0.13 +00..0025  
(0.50)  
(0.50)  
1.00 0.05  
(5°)  
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Nikon Camera Lens f 4 56G ED User Manual
Nortel Networks Network Router 142 User Manual
Olevia Flat Panel Television 242T FHD User Manual
Omega Vehicle Security Stud Sensor OM 40 C HT User Manual
P3 International Telephone P5090 User Manual
Palsonic Flat Panel Television TFTV4200FHD User Manual
Panasonic Electric Shaver ER224 User Manual
Panasonic Electric Shaver ES WD51 User Manual
Panasonic Music Mixer AG HMX100E User Manual
Panasonic Network Card 2SB1722G User Manual