Panasonic Projector ET PKE2000 User Manual

S
P
E
C
F
I
L
E
Ceiling mount bracket for high ceilings  
ET-PKE2000  
Description  
This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.  
Specifications Vertical correction angle:  
Horizontal slant correction angle:  
+5°, -20°  
10°  
Horizontal turn correction angle:  
5°  
Dimensions (W x H x D):  
468 x 418 – 498 x 195 mm  
(18-7/16˝ x 16-16/32˝–19-19/32˝ x 7-11/16˝)  
3.0 kg (6.6 lbs)  
Weight:  
Weights and dimensions shown are approximate. Specifications subject to change without notice.  
Parts  
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . 1  
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Washer-fitted hexagonal bolts (M6 x 12) . . . . 19  
Washer-fitted screws (M4 x 10) . . . . . . . . . . . 10  
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Projector mount bracket . . . . . . . . . . . . . . . . . . 1  
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . 1  
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . 1  
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . . 1  
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . 1  
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Caution:  
All mounting work must be done by a qualified technician.  
Ensure that the mounting (ceiling) area has sufficient strength.  
Read the enclosed mounting instructions carefully before starting the mounting procedure.  
When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.  
Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool  
should be used.  
Dimensions  
Illustration shows the ET-PKE2000 attached  
Attachment plate  
to the PT-AE2000.  
Attachement  
plate  
Ø49  
(1-15/16˝)  
Ø9.5 (3/8˝)  
Ø43  
(1-11/16˝)  
Ø8.5  
(11/32˝)  
70  
(2-3/4˝)  
191  
PT-AE2000  
(7-1/16˝)  
110 (4-11/32˝)  
140 (5-1/2˝)  
160 (6-5/16˝)  
unit : mm (inch)  
NOTE: This illustration is not drawn to scale.  
As of September 2007  
< 1 >  
 

Multitech Fax Machine 410 User Manual
Mustang Survival Life Jacket MD3085 User Manual
National Instruments Personal Computer TPC 2012 User Manual
NETGEAR Modem 208 10026 01 User Manual
Nextar GPS Receiver M30408EH02 User Manual
Nikon Camcorder L105 User Manual
Nokia Conference Phone HF 510 User Manual
NordicTrack Treadmill NTL22840 User Manual
Nortel Networks Network Card 1002rp User Manual
Oki Computer Drive 70043502 User Manual