Panasonic Network Card 2SD1823G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SD1823G  
Silicon NPN epitaxial planar type  
For low-frequency amplification  
Features  
Package  
High forward current transfer ratio hFE  
Low collector-emitter saturation voltage VCE(sat)  
High emitter-base voltage (Collector open) VEBO  
Low noise voltage NV  
Code  
SMini3-F2  
Marking Symbol: 1Z  
Pin Name  
S-Mini type package, allowing downsizing of the equipment  
and automatic insertion through the tape packing and the maga-  
zine packing.  
1: Base  
2: Emitter  
3: Collector  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
VCBO  
VCEO  
VEBO  
IC  
Rating  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector current  
50  
40  
15  
V
V
50  
mA  
mA  
mW  
°C  
Peak collector current  
ICP  
100  
Collector power dissipation  
Junction temperature  
PC  
150  
Tj  
150  
Storage temperature  
Tstg  
55 to +150  
°C  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VCEO  
VEBO  
ICBO  
Conditions  
Min  
50  
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector-base cutoff current (Emitter open)  
Collector-emitter cutoff current (Base open)  
Forward current transfer ratio *  
Collector-emitter saturation voltage  
Transition frequency  
IC = 10 µA, IE = 0  
IC = 1 mA, IB = 0  
40  
V
IE = 10 µA, IC = 0  
VCB = 20 V, IE = 0  
VCE = 20 V, IB = 0  
VCE = 10 V, IC = 2 mA  
15  
V
0.1  
1
µA  
µA  
ICEO  
hFE  
400  
2000  
0.20  
VCE(sat) IC = 10 mA, IB = 1 mA  
fT VCB = 10 V, IE = −2 mA, f = 200 MHz  
0.05  
120  
V
MHz  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
R
S
T
hFE  
400 to 800  
600 to 1 200 1000 to 2000  
Publication date: May 2007  
SJC00375AED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
SMini3-F2  
Unit: mm  
2.00 0.20  
0.30 +00..0025  
3
1
2
0.13 +00..0025  
(0.65)  
(0.65)  
1.30 0.10  
(5°)  
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Murphy Switch W0270 User Manual
Napoleon Fireplaces Indoor Fireplace BGNV36N User Manual
NETGEAR Network Hardware WNDAP360 100NAS User Manual
NuTone Clock AHS 200 User Manual
Omron Network Card CJ1W ETN21 User Manual
Onkyo Stereo Receiver ED 205 User Manual
Optiview Home Security System 10XSPD User Manual
Panasonic All in One Printer DP 2310 User Manual
Panasonic Cordless Telephone KXTG7622B User Manual
Panasonic Security Camera KX TD816NZ KX TD1232NZ User Manual