Panasonic Network Card 2SC4835G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SC4835G  
Silicon NPN epitaxial planar type  
For UHF band low-noise amplification  
Features  
Package  
Low noise figure NF  
Code  
High forward transfer gain S21e2  
High transition frequency fT  
SMini3-F2  
Marking Symbol: 3M  
Pin Name  
1: Base  
S-Mini type package, allowing downsizing of the equipment  
and automatic insertion through the tape packing and the maga-  
zine packing  
2: Emitter  
3: Collector  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
Rating  
Unit  
V
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
15  
10  
V
2
80  
V
Collector current  
IC  
PC  
Tj  
mA  
mW  
°C  
°C  
Collector power dissipation  
Junction temperature  
Storage temperature  
150  
150  
Tstg  
55 to +150  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VCEO  
ICBO  
IEBO  
hFE  
Conditions  
Min  
15  
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Collector-base cutoff current (Emitter open)  
Emitter-base cutoff current (Collector open)  
IC = 10 µA, IE = 0  
IC = 100 µA, IB = 0  
VCB = 10 V, IE = 0  
VEB = 2 V, IC = 0  
10  
V
1
1
µA  
µA  
1, 2  
Forward current transfer ratio *  
VCE = 8 V, IC = 20 mA  
50  
5
200  
Transition frequency  
fT  
VCE = 8 V, IC = 15 mA, f = 800 MHz  
6
GHz  
pF  
Collector output capacitance  
Cob  
VCB = 10 V, IE = 0, f = 1 MHz  
0.7  
1.2  
(Common base, input open circuited)  
Forward transfer gain  
Maximum unilateral power gain  
Noise figure  
S21e2 VCE = 8 V, IC = 15 mA, f = 800 MHz  
11  
14  
15  
dB  
dB  
dB  
GUM  
NF  
VCE = 8 V, IC = 15 mA, f = 800 MHz  
VCE = 8 V, IC = 7 mA, f = 800 MHz  
1.3  
2.0  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. 1: Pulse measurement  
*
2: Rank classification  
*
Rank  
Q
R
S
hFE  
50 to 100  
80 to 130  
100 to 200  
Publication date: May 2007  
SJC00368AED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
SMini3-F2  
Unit: mm  
2.00 0.20  
0.30 +00..0025  
3
1
2
0.13 +00..0025  
(0.65)  
(0.65)  
1.30 0.10  
(5°)  
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Napoleon Fireplaces Gas Heater BGD42N User Manual
National Instruments Stereo Amplifier SC 2040 User Manual
Nextar MP3 Player MA588 User Manual
NextBase DVD Player SDV77 BD User Manual
NHT Speaker 29 User Manual
Nikon Camera Lens COOLPIX 5000 User Manual
Nortel Networks Server 553 3001 358 User Manual
Olympus Microcassette Recorder AS 2300 User Manual
Panasonic Camcorder AJ D400P User Manual
Panasonic Fax Machine KX FL611AL User Manual