One for All Universal Remote URC 6800 User Manual

U N I V E R S A L R E M OT E C ON T R OL S  
URC 6800  
Cinema 6+  
Manual  
1
 
FEATURES AND FUNCTIONS  
FEATURE - FUNCTION  
The Light (LED) flashes red to show  
The illustration below and the chart on the next three pages  
describe the features and functions of the Cinema 6+ univer-  
sal remote control. Use the drawing to locate each feature of  
the remote, then refer to the chart for a description of what  
function each feature performs.  
that the remote is working and is sending a signal.  
The SETUP key is used to program your  
Cinema 6+.  
The POWER key controls power ON and OFF the  
same as the POWER key on your original remote.  
Please note that most CD Players do not have an  
ON/OFF function on the original remote control. If  
this is the case with your CD Player, then POWER  
will have no effect on your CD Player.  
The TV, VCR, DVD/LD, RCVR, CD and CBL/SAT  
keys are used to select the home entertainment  
component you want to control. If your component  
does not respond when you press a key on the  
remote control, press the appropriate device key  
(TV, VCR, DVD/LD, RCVR, CD or CBL/ SAT) first to  
tell the remote control which component you would  
like the remote to operate.  
L
L
The VOL (Volume Up), VOL (Volume Down) and  
MUTE keys control the volume the same as the  
Volume Up and Down and Mute keys on your  
original remote.  
L
The CH (Channel Up) and CH (Channel Down)  
L
keys change channels the same as the Channel Up  
and Down keys on your original remote. The  
L
CH  
/
keys also control the following functions in  
L
other modes: DVD/LD mode = Skip Forward/ Skip  
Reverse, RCVR and CD mode = Preset Up/Preset  
Down.  
The Digit keys (0-9) control direct channel access  
the same as the Digit keys on your original remote.  
The Digit keys (0-9) may also control the following  
functions in other modes: RCVR mode = Input  
Selections.  
The ENTER key operates the same as the Enter key  
on your original remote. If your original remote con-  
trol required you to use an Enter key to change  
channels, use the ENTER key on the Cinema 6+  
after entering your channel number. The ENTER key  
may also control the following functions in other  
mode: RCVR mode = TAPE MON.  
The PREV CH (Previous Channel) key operates the  
same as the Last Channel or Recall key on your  
original remote. The PREV CH key may also control  
the following functions in other modes: DVD/LD,  
RCVR and CD mode = Random.  
4
5
 
The SLEEP key accesses the Sleep Timer of your  
home entertainment components (TV, CBL/SAT and  
RCVR modes only). Even if your component does  
not have a Sleep Timer, the Cinema 6+ may access  
its own built-in sleep timer. See page 28 for addition-  
al information.  
Screen menus. Please consult your home entertain-  
ment component’s original owner’s manual for more  
detailed instructions on accessing and navigating  
your On-Screen menus.  
The DISPLAY key operates the Display function of  
your home entertainment components.  
The REW (Rewind), PL (PLAY), FF (Fast Forward)  
REC (Record), STOP, and PAUSE keys operate the  
same as the transport keys on your original VCR,  
Laser Disc, DVD and CD Player remote. As a safety  
feature of the Cinema 6+, you must press the REC  
key twice before recording.  
The PIP On/Off key accesses your TV’s Picture-in-  
Picture feature. The PIP On/Off key may also control  
the following functions in other modes: CD  
mode =Disk Skip, DVD/LD mode = Subtitle On/Off,  
CBL/SAT mode = View.  
The SWAP key swaps the Picture-in Picture window  
and the TV’s main picture. The SWAP key may also  
control the following functions in other modes:  
CBL/SAT mode = SAT.  
The TV/VCR key operates the same as the TV/VCR  
key on your original VCR remote. The TV/VCR key  
may also control the following functions in other  
modes: TV mode = TV/VIDEO, CBL/SAT mode =  
A/B or TV/SAT, DVD/LD mode = TV/LD, RCVR  
mode = Input Select, CD mode = A/B.  
The MOVE PIP key moves the Picture in-Picture  
window around your TV screen. The MOVE PIP key  
may also control the following functions in other  
modes: DVD/LD mode = Angle, CBL/SAT mode =  
Next.  
The MENU key operates the same as the MENU or  
The SURROUND key operates the same as the  
Surround On/Off key on your original remote. The  
SURROUND key may also control the following unc-  
tions in other modes: VCR mode = Auto Tracking,  
DVD/LD mode = Disc, CBL/SAT mode = Favorite  
Channel, CD mode = 10+.  
OSD (On Screen Display) key on your original  
L
remote. Use  
,
L
,
and (Menu Up, Down, Left  
and Right) to navigate your menus. If your original  
remote control had a SELECT key to select options  
in your menus, use SEL. Use the EXIT key to  
exit/clear your On-Screen menus. Please consult  
your home entertainment component’s original  
owner’s manual for more detailed instructions on  
using On-Screen menus.  
The MACRO and MACRO2 keys can sequentially  
memorize up to 15 key strokes per key for access  
with a single key press. These keys are not mode  
specific. See page 26 for more details.  
L
The  
,
L
,
and (Menu Up, Down, Left and  
Right) keys are used to navigate your On-Screen  
menus. The  
L
,
L
,
and keys may also control  
1L, 2L, 3L, and 4L are mode-specific learning keys  
that allow you to customize your Cinema 6+ for  
unique functions not found on your new remote con-  
trol. They  
the following functions in other modes: RCVR mode  
= Rear Level +/- and Balance Left/Right, CD mode =  
Track +/- and Disc +/-.  
will accept up to four new functions per device mode  
for a total of 24 new functions. See page 22 for addi-  
tional details.  
The SEL (Select) key selects options in your On-  
Screen menus. The SEL key may also control the  
following functions in other modes: RCVR mode =  
Surround Mode, CD mode = Disc Select, DVD/LD  
mode = Chapter.  
The EXIT key exits or clears your on screen menus.  
The EXIT key may also control the following func-  
tions in other modes: RCVR and CD mode =  
Open/Close.  
The PROG/GUIDE key operates your components  
secondary menus as well as your DBS system’s and  
L
Cable Converter’s Guide function. Use the  
and (Menu Up, Down, Left and Right) keys to  
,
,
L
navigate your menus. If your original remote control  
had a SELECT key to select options in your menus,  
use SEL. Use the EXIT key to exit/clear your On-  
6
7
 
POWER. The TV should turn off. If it does not  
respond, repeat steps 2-4, trying each code listed for  
your brand until you find the one that operates your  
TV.  
INSTALLING THE BATTERIES  
Your Cinema 6+ requires four (4) new AAA alkaline batteries.  
To install the batteries:  
NOTE: If you have tried all the codes listed for your  
brand and your TV does not respond, try using the  
search method found on page 21.  
1.  
On the back of the Cinema 6+, pull back on the  
tab and lift the battery cover off.  
5.  
Your Cinema 6+ is now programmed to operate your  
TV. Write your TV code in the boxes to the left for  
future reference.  
2.  
Match the + and - marks on the batteries to the  
+ and - marks in the battery case, then insert  
the  
batteries.  
Remember, if you want to use your Cinema 6+ to operate  
your TV, press the TV key first.  
Setup Codes For TVs  
Admiral  
Aiko  
0093, 0179, 0180, 0016, 0047  
0092  
Akai  
Alaron  
Ambassador  
Ampro  
Anam  
0030  
0179  
0177  
0751  
3.  
4.  
Press the battery cover back into place.  
0180  
0019, 0185, 0003  
0451, 0092, 0180, 0003  
0180  
0017, 0030, 0179  
0019  
0154, 0016  
0180  
0019  
0056, 0030  
0030  
0054  
AOC  
Audiovox  
Baysonic  
Beaumark  
Belcor  
Bell & Howell  
Bradford  
Brockwood  
Candle  
Test the unit by pressing POWER. If the bateries  
are inserted correctly, the red light will blink.  
NOTE: Removing the batteries will not require you to repro-  
gram your remote control because the Cinema 6+ has unlim-  
ited memory backup.  
Carnivale  
Carver  
Celebrity  
Cineral  
0000  
0451, 0092  
Citizen  
0060, 0092, 0030, 0056, 0039  
0185  
0056  
0180, 0185  
SETTING UP YOUR COMPONENTS  
Clairtone  
Concerto  
Contec  
Programming the Cinema 6+ to operate your TV:  
Craig  
0180  
Crown  
Curtis Mathes  
CXC  
Daewoo  
Daytron  
Denon  
Dumont  
Dwin  
0180, 0039  
0030, 0060, 0154, 0039, 0466, 1147, 1347  
0180  
0451, 0092, 0019, 0039, 0624  
0019  
0145  
0017, 0019  
NOTE: If you are trying to program a TV/VCR combination,  
do not perform these instructions. Instead, follow the steps in  
“Programming the Cinema 6+ to operate your TV/VCR  
Combo starting on page 13.  
Locate the brand name of your TV in the “Setup Codes For  
TVs” section (starting on the next page), and write it in the  
space below.  
0720, 0774  
0000, 0185  
Electroband  
Emerson  
0463, 0236, 0180, 0019, 0154, 0177, 0178, 0179, 0185,  
TV Brand: ________________________________  
0282, 0039, 0624  
0030  
0154, 0159  
0179  
0171, 0179, 0180  
0180  
0047, 0051, 0451, 0021, 0178, 0282, 0135, 1147, 1347  
0019, 0030, 0017  
0019, 0030, 0178, 0039  
0053, 0056  
0179, 0180  
0178  
0180  
0145, 0151, 0056  
0054  
0054  
0000  
0053  
0180  
Envision  
Fisher  
Fujitsu  
Funai  
Futuretech  
GE  
Gibralter  
Goldstar  
Gradiente  
Grunpy  
Hallmark  
Harvard  
Hitachi  
Infinity  
JBL  
The brands are listed in alphabetical order with the most  
popular codes listed first.You will use one of these codes to  
program your Cinema 6+ to operate your TV as follows:  
1.  
Turn on your TV.  
2.  
On the Cinema 6+, press TV and release.  
Press and hold SETUP until the red light blinks  
twice, then release SETUP.  
3.  
4.  
Enter the first four-digit TV code listed for your  
brand. If performed correctly, the red light will blink  
twice when you enter the final digit.  
JCB  
JVC  
KEC  
Kenwood  
Aim the Cinema 6+ at your TV and press  
0019, 0030  
8
9
 
Kloss  
KTV  
0024  
TMK  
Toshiba  
0056, 0177, 0178  
0156, 0060, 0154  
0030, 0180, 0185, 0032  
Setup Codes For TVs (continued)  
Setup Codes For TVs (continued)  
LG  
0056  
Tosonic  
0185  
0039  
Logik  
0016  
Totevision  
Luxman  
LXI  
0056  
Vector Research 0030  
0047, 0054, 0154, 0156, 0178  
Victor  
0053  
Magnasonic  
Magnavox  
Majestic  
Marantz  
Matsushita  
Megatron  
MEI  
0179, 0030, 0092, 0093, 0019, 0003, 0054, 0156  
0054, 0096, 0187, 0030, 0179, 0171  
0016  
0054, 0030  
0250  
0145, 0178  
0185  
Vidikron  
Vidtech  
Viking  
0054  
0019, 0178  
0046  
Wards  
0016, 0019, 0030, 0054, 0056, 0096, 0165, 0178, 0179,  
0021  
White  
Westinghouse 0451, 0463, 0236, 0180, 0624  
Memorex  
MGA  
0056, 0150, 0154, 0016, 0178  
0150, 0019, 0030, 0178  
Yamaha  
Zenith  
0019, 0030  
0017, 0092, 0016  
Midland  
Minutz  
Mitsubishi  
Motorola  
MTC  
0017, 0047, 0051, 0135, 0039  
0021  
0150, 0093, 0019, 0178  
0093  
0060, 0019, 0030, 0056, 0185  
0180  
0156, 0166, 0178  
Programming the Cinema 6+ to operate your VCR:  
Locate the brand name of your VCR in the “Setup Codes For  
VCRs” section (starting on the next page), and write it in the  
space below.  
Multitech  
NAD  
NEC  
Nikko  
0019, 0030, 0056  
0030, 0092, 0178  
VCR Brand: ______________________________  
The brands are listed in alphabetical order with the most pop-  
ular codes listed first.You will use one of these codes to pro-  
gram your Cinema 6+ to operate your VCR as folllows:  
NTC  
Onwa  
0092  
0180  
0250, 0154, 0166  
0093, 0165  
0236, 0436  
0250, 0051  
0047, 0156, 0051, 0030, 0019, 0021, 0060, 0135, 0178,  
0039, 1347  
0054, 0145, 0096, 0019, 0030  
0054  
Optimus  
Optonica  
Orion  
Panasonic  
Penney  
1.  
2.  
Turn on your VCR and play a tape.  
On the Cinema 6+, press VCR and release. Press and  
hold SETUP until the red light blinks twice, then  
release SETUP.  
Philco  
Philips  
Pilot  
0019, 0030, 0039  
Pioneer  
Portland  
Prism  
Proscan  
Proton  
0166  
0092, 0019, 0039  
0051  
0047  
0178, 0466  
0017, 0019  
0250, 0051, 0165  
0047, 0056, 0154, 0019, 0030, 0165, 0178, 0180, 0039  
0047, 0019, 0090, 0135, 1047, 1147, 1247, 1347  
0056, 0154, 0019, 0030, 0165, 0178, 0180, 0039  
0185  
0017, 0030, 0603  
0030, 0039  
0060, 0019, 0030, 0056, 0178, 0039  
3.  
4.  
Enter the first four-digit VCR code listed for your  
brand. If you perform this procedure correctly, the  
red light will blink twice when entering the final digit.  
Pulsar  
or  
Aim the Cinema 6+ at your VCR and press POWER.  
Your VCR should turn off. If your original VCR  
remote control did not have a POWER key, press  
STOP. Your VCR should stop. If your VCR does not  
respond, repeat steps 2-4, trying each code listed for  
your brand until you find the one that operates your  
VCR.  
Quasar  
RadioShack  
RCA  
Realistic  
Rhapsody  
Runco  
Sampo  
Samsung  
Samsux  
Sansei  
0039  
0451  
0154, 0159  
0019  
NOTE: If you have tried all the codes listed for your  
brand and your VCR does not respond, try using the  
search method found on page 21.  
Sanyo  
Scimitsu  
Scotch  
0178  
Scott  
0236, 0019, 0178, 0179, 0180  
Sears  
Semivox  
Semp  
0047, 0054, 0056, 0154, 0156, 0171, 0178, 0159, 0179  
0180  
0156  
0093, 0165, 0039  
5.  
Your Cinema 6+ is now programmed to operate your  
VCR. Write your VCR code in the boxes to the left  
for future reference.  
Sharp  
Shogun  
Signature  
Simpson  
Sony  
Soundesign  
Squareview  
SSS  
0019  
0016  
0187  
0000  
0178, 0179, 0180  
0171  
0019, 0180  
0180  
0000  
0054, 0096, 0030  
0171  
0093  
0250, 0051  
0179  
0051, 0056  
Remember, if you want to use your Cinema 6+ to operate  
your VCR, press the VCR key first.  
Setup Codes For VCRs  
Starlite  
Admiral  
Adventura  
Aiko  
0048, 0121, 0184, 0039, 0060, 0202  
0000  
0278  
Supreme  
Sylvania  
Symphonic  
Tandy  
Technics  
Technol Ace  
Techwood  
Teknika  
Aiwa  
Akai  
0037, 0000  
0041  
American High 0035  
Asha  
0240  
0037  
0240  
0104  
Audiovox  
Beaumark  
Bell & Howell  
0054, 0056, 0060, 0092, 0150, 0016, 0019, 0179, 0180,  
0039  
0056  
Telefunken  
10  
11  
 
Broksonic  
Calix  
0184, 0209, 0479, 0002, 0121  
0037  
RadioShack  
Radix  
0000, 0037, 1037, 1062, 1162, 1262  
0037  
Setup Codes For VCRs (continued)  
Setup Codes For VCRs (continued)  
Canon  
0035  
Randex  
RCA  
0037  
Carver  
0081  
0060, 0240, 0042, 0035, 0048, 0077, 0149  
CCE  
Cineral  
Citizen  
Colt  
0072, 0278  
0278  
0037, 0278  
0072  
Realistic  
Runco  
Samsung  
Sanky  
0000, 0035, 0037, 0046, 0047, 0048, 0066, 0104  
0039  
0240, 0045  
0048, 0039  
Craig  
0072, 0240, 0037, 0047, 0271  
0035, 0041, 0060, 0202  
0240  
0278, 0045  
Sansui  
Sanyo  
Scott  
Sears  
Semp  
0000, 0041, 0067, 0271, 0479  
0104, 0046, 0047, 0054, 0240  
0043, 0045, 0121, 0184, 0210  
0000, 0035, 0037, 0042, 0046, 0047, 0066, 0104  
Curtis Mathes  
Cybernex  
Daewoo  
Denon  
0042  
0045  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
Emerson  
0000  
0037  
0037  
0032  
Sharp  
0048  
0072  
0240  
0072  
Shintom  
Shogun  
Singer  
Sony  
0209, 0184, 0479, 0278, 0000, 0002, 0036, 0037, 0043,  
0032, 0033, 0000, 0035  
0042  
0035, 0081, 0043, 0000, 0110  
0000  
0041  
0000, 0041  
0162, 0035  
0000, 0035, 0037  
0000  
0240, 0036, 0208  
0043, 0045, 0066, 0210  
0037, 0240  
0068, 0121, 0184, 0212  
0104, 0047, 0066  
0033, 0035  
0000  
0000  
0060, 0035, 0048, 0240  
0037, 0038  
0432, 0526  
STS  
Fisher  
Fuji  
Funai  
Garrard  
GE  
Goldstar  
Go-Video  
Gradiente  
Harley Davidson 0000  
Harman/Kardon 0038  
Harwood  
Headquarter  
HI-Q  
Hitachi  
Jensen  
JVC  
Sylvania  
Symphonic  
Tatung  
TEAC  
Technics  
Teknika  
Thomas  
TMK  
Toshiba  
Totevision  
Unitech  
Vector Research 0038  
Vector 0045  
Video Concepts 0040, 0045  
0000  
0072, 0068, 0072  
0046  
0047  
0041, 0000, 0042  
0041  
0041, 0067  
0037, 0278  
0240  
Videosonic  
Wards  
0240  
0000, 0035, 0042, 0047, 0048, 0060, 0072, 0081, 0149,  
0240  
KEC  
Kenwood  
KLH  
0038, 0041, 0067  
0072  
White  
Westinghouse 0278, 0479, 0209, 0184  
Kodak  
Lloyd’s  
Logik  
0035, 0037  
0000, 0208  
0072  
XR-1000  
Yamaha  
Zenith  
0000, 0035, 0072  
0038  
0039, 0000, 0033  
LXI  
0037  
Magnasonic  
Magnavox  
Magnin  
Marantz  
Marta  
Matsushita  
MEI  
Memorex  
0278, 0179, 0171, 0020, 0037, 0072, 0240  
0035, 0081, 0000, 0039, 0110, 0149  
0240  
0035, 0081  
0037  
0162, 0035, 0454  
0035  
0162, 0240, 0035, 0037, 0104, 0000, 0039, 0046, 0047,  
0048, 1037, 1062, 1162, 1262  
0043, 0240  
Programming the Cinema 6+ to operate your TV/VCR  
Combo:  
Locate the brand name of your TV/ VCR Combo in the  
“Setup Codes For TV/ VCR Combos” section (starting on the  
next page), and write it in the space below.  
TV/VCR Combo Brand: ____________________  
MGA  
The brands are listed in alphabetical order with the most  
popular codes listed first.You will use one of these codes to  
program your Cinema 6+ to operate your TV/VCR Combo as  
follows:  
MGN Technology 0240  
Minolta  
Mitsubishi  
Motorola  
MTC  
0042  
0043, 0048, 0067  
0035, 0048  
0240, 0000  
Multitech  
NEC  
Nikko  
Noblex  
Olympus  
Optimus  
Orion  
0000, 0072  
0038, 0041, 0067, 0104  
0037  
0240  
1.  
2.  
Turn on your TV/VCR Combo.  
Press VCR and release. Press and hold SETUP until  
the Cinema 6+’s red light blinks twice, then release  
SETUP.  
0035  
0162, 0048, 0037, 0104, 0454, 1037, 1062, 1162, 1262  
0209, 0184, 0479, 0002  
Panasonic  
Penney  
Pentax  
Philco  
Philips  
Pilot  
Pioneer  
Proscan  
Protec  
0162, 0035, 0077, 0225, 0454, 1062, 1162, 1262  
0035, 0037, 0038, 0042, 0240  
0042  
0035, 0209, 0479  
0035, 0081, 0110  
0037  
0067, 0162  
0060, 0202  
0072  
0039  
0046  
0046  
3.  
4.  
Enter the first four-digit TV/VCR code listed for your  
brand in the “Setup Codes For TV/VCR Combos”  
section. If you perform this procedure correctly, the  
red light will blink twice when you enter the final digit  
of your code.  
Aim the Cinema 6+ at your TV/VCR Combo and  
press POWER. The unit should turn off. If it does not  
respond, Repeat steps 2-4, trying each code listed for  
your brand until you find the one that operates your  
Pulsar  
Quarter  
Quartz  
Quasar  
0162, 0035, 0077, 0454, 1062, 1162, 1262  
12  
13  
 
TV code 0451 for volume control.  
TV/VCR Combo.  
NOTE: If you have tried all the codes listed for your  
brand and your TV/VCR Combo does not respond,  
try using the search method found on page 21.  
Programming the Cinema 6+ to operate your DVD or  
Laser Disc Player:  
Locate the brand name of your DVD or Laser Disc Player in  
the DVD or Laser Disc Player setup codes (starting on the  
next page), and write it in the space below.  
5.  
Your Cinema 6+ is now programmed to operate your  
TV/VCR Combo. Write your TV/VCR Combo code in  
the boxes to the left for future reference.  
DVD/LD Player Brand: ______________________  
The brands are listed in alphabetical order with the most pop-  
ular codes listed first.You will use one of these codes to pro-  
gram your Cinema 6+ to operate your DVD or Laser Disc  
Player as follows:  
Remember, to use your Cinema 6+ to operate your TV/VCR  
Combo, press the VCR key first.  
1.  
Turn on your DVD or Laser Disc Player and insert a  
disc.  
Setup Codes For TV/VCR Combos  
American High 0035*  
2.  
Press DVD/LD and release. Press and hold  
Brocksonic  
Colt  
0002, 0294, 0479  
0072  
SETUP until the Cinema 6+’s red light blinks twice,  
then release SETUP.  
Curtis Mathes  
Daewoo  
Emerson  
Funai  
0035*  
0278*  
0002, 0294, 0479  
0000  
3.  
4.  
Enter the first four-digit DVD or Laser Disc Player  
code listed for your brand. If performed correctly, the  
red light will blink twice when entering the final digit.  
GE  
Hitachi  
HQ  
0035*, 0060*, 0048*, 0240  
0035*, 0000  
0000  
Lloyds  
0000  
Aim the Cinema 6+ at your DVD or Laser  
Disc Player and press POWER.Your  
DVD or Laser Disc Player should turn off. If it does  
not respond, repeat steps 2-4, trying each code list-  
ed for your brand until you find the one that works.  
Magnavox  
Magnin  
Memorex  
MGA  
0000, 0035*, 0081*  
0240  
0037, 0162*  
0240  
Mitsubishi  
Orion  
Panasonic  
Penney’s  
Quasar  
RCA  
0048*  
0002, 0294, 0479  
0035*, 0162*  
0035*, 0240, 0162*  
0035*, 0162*  
0035*, 0060*, 0048*  
0000, 0479  
0240  
NOTE: If you have tried all the codes listed for your  
brand and your DVD or Laser Disc Player does not  
respond, try using the search method found on page  
21.  
Sansui  
Sanyo  
Sears  
Sony  
Symphonic  
Zenith  
0000, 0037  
0032*  
0000  
5.  
Your Cinema 6+ is now programmed to operate your  
DVD or Laser Disc Player. Write your DVD or Laser  
Disc Player code in the boxes to the left for future refer-  
ence.  
0000  
NOTE: If your TV/VCR works with one of the above codes highlight-  
ed with an asterisk (*), you may need to program a separate TV  
code to control the volume. Check the list of codes below and follow  
the instructions in the “Programming the Cinema 6+ to Operate  
Your TV” section to program the supplied TV code.  
Remember, to use Cinema 6+ to operate your DVD or Laser  
Disc Player, press the DVD/LD key first.  
TV/VCRs working on VCR code 0032 may require  
TV code 0000 for volume control.  
TV/VCRs working on VCR code 0035 may require  
TV code 0051 for volume control.  
TV/VCRs working on VCR code 0048 may require  
TV code 0093 for volume control.  
TV/VCRs working on VCR code 0060 may require  
TV code 0047 for volume control.  
TV/VCRs working on VCR code 0081 may require  
TV code 0054 for volume control.  
TV/VCRs working on VCR code 0162 may require  
TV code 0250 for volume control.  
Setup Codes for DVD Players  
JVC  
0558  
Kenwood  
Magnavox  
Mitsubishi  
Onkyo  
0534  
0503  
0521  
0503  
Panasonic  
Philips  
Pioneer  
Proscan  
RCA  
0490  
0539, 0503  
0525, 0571  
0522  
0522  
Samsung  
Sony  
0573  
0533  
TV/VCRs working on VCR code 0278 may require  
Technics  
Toshiba  
Yamaha  
Zenith  
0490  
0503  
0490, 0545  
0503, 0591  
Setup Codes for Laser Disc Players  
Denon  
Mitsubishi  
NAD  
0059  
0059  
0059  
15  
14  
 
Pioneer  
Sony  
0059  
0193, 0201  
Onkyo  
Optimus  
Panasonic  
0135, 0380  
0042, 0080, 0181, 0186, 0531, 0670, 0738, 0801  
0039, 0309, 0518  
Programming the Cinema 6+ to operate your Receiver/Tuner:  
Setup Codes For Receivers/Tuners (continued)  
Penney  
Philips  
Pioneer  
Quasar  
RCA  
0195  
0189  
Locate the brand name of your Receiver/Tuner in the “Setup  
Codes For Receiver/Tuners” section (starting below page),  
and write it in below.  
0014, 0080, 0150, 0531, 0630, 1023  
0039  
0054, 0360, 0531, 0530  
Receiver/Tuner Brand: ______________________  
Realistic  
Sansui  
Scott  
0181, 0195  
0189  
0322  
The brands are listed in alphabetical order with the most  
popular codes listed first.You will use one of these codes to  
program your Cinema 6+ to operate your Receiver/Tuner as  
follows:  
Sharp  
0186  
Sherwood  
Sony  
0491, 0502  
0158**, 0474  
Soundesign  
TEAC  
0670  
0463  
1.  
2.  
Turn on your Receiver/Tuner.  
Technics  
Victor  
0039, 0309, 0518  
0074  
Press RCVR and release. Press and hold SETUP  
until the Cinema 6+’s red light blinks twice, then  
release SETUP.  
Wards  
Yamaha  
Yorx  
0014, 0042, 0054, 0080, 0158, 0189  
0176, 0186  
0195  
Zenith  
0857  
3.  
4.  
Enter the first four-digit Receiver/Tuner code listed  
for your brand in the “Setup Codes For  
Receivers/Tuners” section. If performed correctly, the  
red light will blink twice when you enter the final  
digit.  
**May use Misc. Audio code 0159 to operate surround and tuner presets.  
See page 23 for misc. audio setup and codes.  
Programming the Cinema 6+ to operate your CD Player:  
Locate the brand name of your CD Player in the “Setup Codes  
For CD Players” section (starting on the next page), and write  
it in the space below.  
Aim the Cinema 6+ at your Receiver/Tuner and press  
POWER. The unit should turn off. If it does not  
respond, repeat steps 2-4, trying each code listed for  
your brand until you find one that works.  
CD Player Brand: __________________________  
The brands are listed in alphabetical order with the most  
popular codes listed first.You will use one of these codes to  
program your Cinema 6+ to operate your CD Player as fol-  
lows:  
NOTE: If the unit still does not respond, try using the  
search method on page 21.  
5.  
Your Cinema 6+ is now programmed to operate your  
Receiver/Tuner. Write your  
Receiver/Tuner code in the boxes to the left for  
future reference.  
1.  
2.  
Turn on your CD Player and insert a disc.  
Press CD and release. Press and hold SETUP until  
the Cinema 6+’s red light blinks twice, then release  
SETUP.  
3.  
4.  
Enter the first four-digit CD Player code listed for  
your brand. If performed correctly, the red light will  
blink twice when you enter the final digit of your  
code.  
Remember, to use your Cinema 6+ to operate your  
Receiver/Tuner, press the RCVR key first.  
Setup Codes For Receivers/Tuners  
ADC  
Akai  
Aiwa  
0531  
0076  
Aim the Cinema 6+ at your CD Player and press PL  
(Play).Your CD Player should play your disc. If it  
does not respond, repeat steps 2-4, trying each  
code listed for your brand until you find the one that  
operates your CD Player.  
0121, 0158, 0189, 0405  
Bang & Olufsen 0898  
Capetronic  
Carver  
0531  
0008, 0042, 0189, 0360  
Casio  
0195  
Clarinette  
Curtis Mathes  
Denon  
0195  
0039, 0080  
0004  
NOTE: If you have tried all the codes listed for your  
brand and your CD Player does not respond, try  
using the search method found on page 21.  
Fisher  
Garrard  
0042, 0360  
0463  
Harman/Kardon 0110, 0891, 0189  
JBL  
JVC  
Kenwood  
Linn  
Lloyd’s  
LXI  
0110  
0074  
5.  
Your Cinema 6+ is now programmed to operate your  
CD Player. Write your CD Player code in the boxes  
to the left for future reference.  
0027, 0313, 0314, 0186, 0042  
0189  
0195  
0181  
Magnavox  
Marantz  
MCS  
0189, 0195, 0531, 0391  
0039, 0189  
0039  
Modulaire  
NAD  
0195  
0320  
Nakamichi  
0097  
16  
17  
 
Remember, if you want to use your Cinema 6+ to operate  
your CD Player, press the CD key first.  
gram your Cinema 6+ to operate your Cable Converter or  
Satellite Receiver as follows:  
Setup Codes For CD Players  
1.  
2.  
Turn on your Cable Converter or Satellite Receiver.  
Aiwa  
0124, 0157  
Bang & Olfusen 0212  
Press CBL/SAT and release. Press and hold SETUP  
until the Cinema 6+’s red light blinks twice, then  
release SETUP.  
Burmester  
California Audio  
Lab  
0420  
0029  
Carver  
Denon  
DKK  
0157, 0179, 0437  
0003, 0873  
0000  
3.  
4.  
Enter the first four-digit Cable Converter or Satellite  
Receiver code listed. If you perform this procedure  
correctly, the red light will blink twice when you enter  
the final digit of your code.  
Emerson  
Fisher  
Garrard  
Genexxa  
Harman/Kardon 0173  
Hitachi  
H/K  
JVC  
Kenwood  
Krell  
Linn  
LXI  
0305  
0174, 0179  
0393, 0420  
0032, 0305  
Aim the Cinema 6+ at your Cable Converter or  
Satellite Receiver and press POWER.Your Cable  
Converter or Satellite Receiver should turn off. If it  
does not respond, repeat steps 2-4, trying each  
code listed for your brand until you find the one that  
operates your Cable Converter or Satellite Receiver.  
0032  
0157  
0072  
0028, 0037, 0190, 0826, 0681  
0157  
0157  
0305  
Magnavox  
Magnavox CD-R 0626  
Marantz  
MCS  
Mission  
MTC  
0157, 0305  
NOTE: If you have tried all the codes listed for your  
brand and your Cable Converter or Sateliite  
Receiver does not respond, try using the search  
method found on page 21.  
0029, 0157, 0180  
0029  
0157  
0420  
Nikko  
NSM  
0174  
0157  
0101, 0868  
5.  
Your Cinema 6+ is now programmed to operate your  
Cable Converter or Satellite Receiver. Write your  
Cable Converter or Satellite Receiver code in the  
boxes to the left for future reference.  
Onkyo  
Optimus  
Panasonic  
Philips  
Pioneer  
Proton  
QED  
0000, 0032, 0037, 0145, 0179, 0305, 0420, 0437, 0468  
0029  
0157, 0626  
0032, 0468, 0244, 0305  
0157  
0157  
Quasar  
RCA  
Realistic  
Rotel  
0029  
Remember, if you want to use your Cinema 6+ to operate  
your Cable Converter or Satellite Receiver, press the  
CBL/SAT key first.  
0764, 0053, 0179, 0305  
0179, 0180, 0420  
0157, 0420  
0157  
SAE  
Sansui  
Sanyo  
Scott  
Sears  
Sharp  
Sherwood  
Sony  
Soundesign  
Tascam  
TEAC  
Technics  
Victor  
Wards  
Yamaha  
Yorx  
0157, 0305  
0179  
0305  
0305  
0037, 0180, 0861  
0180  
0000, 0185, 0490, 0604, 0605  
0145  
Setup Codes for Cable Converters  
ABC  
0003, 0008, 0014, 0007, 0001, 0011, 0013, 0017  
Allegro  
Gantronix  
Archer  
0153, 0315  
0022, 0207  
0797, 0153, 0022, 0207  
0056  
Belcor  
Cable Star  
Cabletenna  
Cableview  
Century  
Citizen  
Colour Voice  
Comtronics  
Contec  
0056  
0022  
0022  
0153  
0153, 0315  
0031  
0040  
0420  
0174, 0180, 0393, 0420  
0029  
0072  
0157, 0053  
0036, 0187  
0461  
0019  
Digi  
0637  
Eastern  
Emerson  
Everquest  
Focus  
Garrard  
GC Electronics 0056, 0207  
Gemini  
General  
Instrument  
0002  
0797  
0015, 0040  
0400  
0153  
Programming the Cinema 6+ to operate your Cable  
Converter or Satellite Receiver:  
Locate the brand name of your Cable Converter or Satellite  
Receiver in the “Setup Codes for Cable Converters” or “Setup  
Codes for Satellite Receivers” section (starting on the next  
page), and write it in either space below.  
0015  
0476, 0003, 0014, 0011, 0276, 0810  
Goldstar  
Goodmind  
Hamlin  
Hitachi  
Hytex  
Jasco  
Jerrold  
Linsay  
0144, 0040  
0797  
0259, 0009, 0020, 0034  
0011  
0007  
0153, 0315, 0015  
0476, 0003, 0014, 0011, 0012, 0015, 0810  
0440  
Cable Converter Brand: ________________________________________________________  
or  
Satellite Receiver Brand: ____________________  
The brands are listed in alphabetical order with the most pop-  
ular codes listed first.You will use one of these codes to pro-  
18  
19  
 
Magnavox  
Memorex  
Movie Time  
Novaplex  
0027, 0014  
0000  
0063, 0156  
0618  
Toshiba DBS  
Uniden DBS  
Zenith  
0790  
0724, 0722  
0856  
SEARCHING FOR YOUR CODE  
Setup Codes for Cable Converters (continued)  
NSC  
Oak  
0063, 0156  
0007, 0019  
0021  
0021, 0107, 0000  
0637  
0000  
0153, 0027, 0031  
0144, 0023, 0533  
If your TV, VCR or Cable Converter does not respond to the  
Cinema 6+ after trying all of the codes listed for your brand, or  
if your brand is not listed at all, try searching for your code. For  
example, after trying all of the codes for your TV, you still can-  
not get the Cinema 6+ to operate your TV, then:  
Optimus  
Panasonic  
Panther  
Paragon  
Philips  
Pioneer  
Popular  
Mechanics  
Prelude  
Pulsar  
1.  
2.  
Turn on your TV.  
0400  
0770  
0000  
Press TV and release. Press and hold SETUP until the  
Cinema 6+’s red light blinks twice, then release  
SETUP.  
RadioShack  
RCA  
0015, 0315, 0797, 0833  
0021  
Realistic  
Recoton  
Regal  
Regency  
Rembrandt  
Runco  
Samsung  
Scientific Atlanta 0477, 0008, 0017  
Seam  
Signal  
Signature  
SL Marx  
Sprucer  
Starcom  
Stargate  
Starquest  
Sylvania  
Tandy  
Teleview  
Texscan  
TFC  
Timeless  
Tocom  
0207  
0400  
0259, 0020  
0002  
0011  
3.  
4.  
Press 9 - 9 - 1.  
Slowly alternate between pressing POWER* and TV  
until your TV turns OFF. Make sure that the Cinema  
6+ is aimed at your TV during the search.You may  
have to press this sequence of buttons (POWER*  
then TV) up to 100 times to search the entire library  
of codes.  
0000  
0144, 0040  
0510  
0015, 0040  
0011  
0040  
0021  
0003, 0015  
0015, 0040, 0797  
0015  
0001  
0258  
0040  
0001  
0310  
0418  
0012, 0013  
0000  
5.  
When your TV turns OFF, press and release SETUP  
to lock in the code for your TV.Your Cinema 6+ is  
now programmed to operate your TV.  
*If you are searching for your VCR, CD, LD or DVD Player  
code, you may want to play a tape or disk and use the STOP  
key instead of the POWER key to search for your code.  
When your VCR stops, press SETUP to lock in your code.  
NOTE: To search for the codes of your other components,  
repeat Steps 1 through 5, only substitute the appropriate  
device key (ie., VCR, DVD/LD, RCVR, CD or CBL/SAT) for  
the component you are searching for.  
Toshiba  
Tusa  
TV86  
0015  
0063  
0153, 0022, 0207  
0007  
Unika  
United Artists  
United Cable  
Universal  
Videoway  
Viewstar  
Zenith  
0003  
0153, 0022, 0056, 0191, 0207  
0250  
0063, 0027, 0258  
0525, 0000, 0015, 0207, 0008  
0400  
RETRIEVING THE CODES PROGRAMMED INTO THE  
Cinema 6+  
If you have set up the Cinema 6+ using the “SEARCHING  
FOR YOUR CODE” procedure, you may want to figure out  
which four-digit code is operating your equipment. Use this  
procedure after you have set up your components to find out  
which four-digit code is operating your equipment. For exam-  
ple, to find out which code is operating your TV after setting  
up your TV using the “SEARCHING FOR YOUR CODE”  
procedure:  
Zentek  
Setup Codes for Satellites  
AlphaStar DBS 0772  
Chaparral  
Echostar DBS  
ExpressVu DBS 0775  
General  
Instrument  
Hitachi DBS  
HTS DBS  
Hughes Network  
Systems DBS 0749  
Jerrold Primestar 0627  
0216  
0775  
0361, 0627, 0869  
0819  
0775  
1.  
Press TV and release. Press and hold SETUP until the  
Cinema 6+’s red light blinks twice, then release  
SETUP.  
Jerrold  
JVC  
0361  
0775  
2.  
3.  
Press 9 - 9 - 0.  
Magnavox DBS 0722, 0724  
Memorex DBS 0724  
Panasonic DBS 0701  
Philips DBS  
Primestar  
Proscan  
For the first digit of your four-digit code, press 1 and  
count the number of times the red light (LED) blinks  
on the Cinema 6+. If the light does not blink when  
you press the number 1, the digit is zero.  
0722, 0724  
0361, 0627  
0566  
0566, 0143, 0855  
0639  
RCA DSS  
Sony DBS  
Star Choice DBS 0869  
STS 0210  
4.  
For the second digit, press 2 and count the number  
of times the red light (LED) blinks on the Cinema 6+.  
20  
21  
 
If the light does not blink when you press the num-  
ber 2, the digit is zero.  
Cinema 6+ blinks twice. (If the red light does not blink  
twice, stop and repeat steps 1 through 6.)  
5.  
6.  
For the third digit, press 3 and count the number of  
times the red light (LED) blinks on the Cinema 6+. If  
the light does not blink when you press the number  
3, the digit is zero.  
NOTE: You can now repeat steps 3 through 6 to learn func-  
tions on the other L keys.  
7.  
Press and hold in the SETUP key until the Cinema  
6+’s red light flashes twice to lock in your new fea-  
ture. (If the red light does not blink twice, stop and  
repeat steps 1 through 6).  
For the fourth and final digit, press 4 and count the  
number of times the red light (LED) blinks on the  
Cinema 6+. If the light does not blink when you  
press the number 4, the digit is zero. Now you have  
your four-digit code.  
8.  
To test the new feature, press and release the  
Device key in which the feature was learned followed  
by the L key on which the feature was learned.  
NOTE: To find out the code for your other components,  
repeat Steps 1 through 6, only substitute the appropriate  
device key (VCR, DVD/LD, RCVR, CD or CBL/SAT) for the  
component code you wish to learn.  
Deleting Functions from the L Keys:  
1.  
Press and hold in the SETUP key until the Cinema  
6+’s red light flashes twice and then release the  
SETUP key.  
LEARNING FUNCTIONS ONTO THE 1L, 2L, 3L AND 4L  
KEYS  
2.  
3.  
Enter in 9 - 7 - 6.  
The 1L, 2L, 3L and 4L keys can be used to customize those  
functions that are unique to your home entertainment needs.  
For example, the Cinema 6+ does not offerTracking Up or  
Down for a VCR. With the learning feature on the Cinema 6+,  
you can add these functions and many others learned from  
your original remote control.  
Press and release the Device key (e.g., TV) where  
the learned feature to be deleted is stored.  
4.  
Press the L key to be deleted twice. The Cinema  
6+’s red light will blink twice after the second press  
of the L key.  
NOTE: Please have your original remote controls handy before  
performing learning on the Cinema 6+.  
1.  
Press and hold SETUP until the Cinema 6+’s red  
light blinks twice, then release  
SETUP.  
SETTING UP OTHER COMPONENTS  
In addition to the components labeled on the device keys  
(TV, VCR, DVD/LD, CBL/SAT, etc.), the Cinema 6+ can also  
operate the following components: Cassette Decks, Infrared  
Home Automation, MiniDisc, Video Accessories, Amplifier  
and Miscellaneous Audio Components (Graphic Equalizers  
and Digital Music Service Boxes).  
2.  
3.  
Press 9 - 7 - 5. The Cinema 6+’s red light will blink  
twice.  
Press and release the Device key in which you want to  
learn a feature (e.g., TV).  
The Setup Codes for these components can be accessed  
under the following device keys:  
NOTE: Steps 4 through 6 need to be completed within 10  
seconds. Please read the next three steps before proceed-  
ing.  
Cassette Decks:Use the VCR Key  
IR Home Automation: Use the CD Key  
4.  
Press and release the L key in which the new fea-  
ture is to be learned. The Cinema 6+’s red light will  
flash rapidly.  
MiniDisc:  
Use the CD Key  
Video Accessories:  
Use the CBL/SAT Key  
(Note : WebTV found under Video Accessories)  
Amplifier Use the RCVR Key  
5.  
Align your original remote control with the arrow mark  
to the left of the LED2o" n your Cinema 6+ remote con-  
trol (see diagram below)  
Miscellaneous Audio: Use the RCVR Key  
For example, to set up a Cassette Player on the VCR key:  
1.  
2.  
Turn on your Cassette Player and insert a tape.  
Press VCR and release. Press and hold SETUP until  
the Cinema 6+’s red light blinks twice, then release  
SETUP.  
3.  
Enter the first four-digit Cassette Player code listed  
for your brand in the “Setup Codes For Audio  
Cassettes” section. If you perform this procedure  
6.  
On your original remote, press and hold the key (fea-  
ture) you want to learn until the red light on the  
22  
23  
 
Fisher  
0052  
correctly, the red light will blink twice when you enter  
the final digit of your code.  
Harman/Kardon 0477  
Jerrold  
JVC  
0459, 0520  
0073  
0376  
0056  
Nikko  
RCA  
4.  
5.  
Aim the Cinema 6+ at your Cassette Player and  
press PL (Play).Your unit should play the tape. If it  
does not respond, repeat steps 2-4, trying each  
code listed for your brand until you find the one that  
works.  
Scientific Atlanta 0460  
Sony  
0010, 0159  
0459  
Starcom  
RE-ASSIGNING DEVICE KEYS  
You can use the Cinema 6+ to operate a second TV or a  
second VCR or any combination of six home entertainment  
components. For example, you may want your Cinema 6+ to  
control 1 Cable Converter, 1 Receiver, 1 CD Player, 1 DVD  
Player and 2 VCRs. To accomplish this, you must re-assign  
one of the device keys to operate the desired component, in  
this case, a second VCR. The chart below shows you how to  
re-assign a particular device key and then set up your new  
component.  
Your Cinema 6+ is now programmed to operate your  
Cassette Player.  
Remember, if you want to use your Cinema 6+ to operate  
your Cassette Player, press the VCR key first.  
Setup Codes For Audio Cassettes  
Aiwa  
0029, 0197  
Bang & Olufsen 0219  
Carver  
Denon  
0029  
0076  
TV to VCR  
SETUP* - 992 - VCR - TV - TV - SETUP* - VCR  
code  
Harman/Kardon 0182  
JVC  
0244  
TV to DVD/LD  
TV to RCVR  
TV to CD  
SETUP* - 992 - DVD/LD - TV - TV - SETUP* - DVD  
or LD Player code  
Magnavox  
Marantz  
Optimus  
Philips  
Pioneer  
Sansui  
Sony  
0029  
0029  
0027, 0220  
0029  
SETUP* - 992 - RCVR - TV - TV - SETUP* - Audio  
code  
0027, 0220  
0029  
0170, 0243, 0291  
0273  
SETUP* - 992 - CD - TV - TV - SETUP* - CD  
Player code  
Victor  
Wards  
Yamaha  
0027  
0097  
TV to CBL/SAT  
VCR to TV  
SETUP* - 992 - CBL/SAT - TV - TV - SETUP* -  
Cable/DBS code  
Setup Codes For IR Home Automation  
GE  
0240  
SETUP* - 992 - TV - VCR - VCR - SETUP* - TV  
code  
Lutron  
0318, 0597  
0167  
One For All  
RadioShack  
0240  
Security System 0167  
VCR to DVD/LD SETUP* - 992 - DVD/LD - VCR - VCR - SETUP* -  
Universal X10  
X10  
0167  
0167  
DVD/LD Player code  
VCR to RCVR  
VCR to CD  
SETUP* - 992 - RCVR - VCR - VCR - SETUP* -  
Audio code  
Setup Codes For MiniDisc  
Denon  
JVC  
0873  
0826, 0681  
0868  
SETUP* - 992 - CD - VCR - VCR - SETUP* - CD  
Player code  
Obkyo  
Sharp  
Sony  
0861  
0490  
VCR to CBL/SAT SETUP* - 992 - CBL/SAT - VCR - VCR - SETUP* -  
Setup Codes For Video Accessories  
Cable/DBS code  
Archer  
0160  
GC Electronics 0160  
DVD/LD to TV  
SETUP* - 992 - TV - DVD/LD - DVD/LD - SETUP* -  
TV code  
Jebsee  
0160  
Magnavox Web-TV 0818  
Philips Web TV 0818  
DVD/LD to VCR SETUP* - 992 - VCR - DVD/LD - DVD/LD -  
RadioShack  
TeleCaption  
Sony Web-TV  
0160  
0171  
0850  
SETUP* - VCR code  
DVD/LD to RCVR SETUP* - 992 - RCVR - DVD/LD - DVD/LD -  
Setup Codes For Integrated Amplifiers/  
SETUP* - Audio code  
Preamplifiers/Amplifiers  
Aiwa  
0406  
0269  
0300  
0160  
0078  
DVD/LD to CD  
SETUP* - 992 - CD - DVD/LD - DVD/LD - SETUP*  
- CD Player code  
Carver  
Curtis Maths  
Denon  
GE  
DVD/LD to CBL/SAT SETUP* - 992 - CBL/SAT - DVD/LD - DVD/LD -  
Harman/Kardon 0892  
JVC  
Linn  
SETUP* - Cable/DBS code  
0331  
0269  
RCVR to TV  
code  
SETUP* - 992 - TV - RCVR - RCVR - SETUP* - TV  
Luxman  
Magnavox  
Marantz  
Nakamichi  
Optimus  
Panasonic  
Pioneer  
Realistic  
Sansui  
0165  
0269  
0269, 0321  
0321  
RCVR to VCR  
SETUP* - 992 - VCR - RCVR - RCVR - SETUP* -  
VCR code  
0013, 0300, 0395  
0308  
RCVR to DVD/LD SETUP* - 992 - DVD/LD - RCVR - RCVR - SETUP*-  
0013, 0300  
0395  
DVD/LD Player code  
0321  
Sony  
0220, 0689  
0078  
RCVR to CD  
SETUP* - 992 - CD - RCVR - RCVR - SETUP* -  
CD Player code  
Soundesign  
Technics  
Victor  
0308  
0331  
RCVR to CBL/SAT SETUP* - 992 - CBL/SAT - RCVR - RCVR -  
Wards  
Yamaha  
0013, 0078  
0354  
SETUP* - Cable/DBS code  
Setup Codes For Miscellaneous Audio  
CD to TV  
SETUP* - 992 - TV - CD - CD - SETUP* - TV code  
Aiwa  
0010, 0159, 0404  
CD to VCR  
SETUP* - 992 - VCR - CD - CD - SETUP* - VCR  
code  
24  
25  
 
CD to DVD/LD  
CD to RCVR  
SETUP* - 992 - DVD/LD - CD - CD - SETUP* -  
DVD or LD Player code  
2.  
3.  
Press 9 - 9 - 3. The Cinema 6+’s red light will blink  
twice.  
SETUP* - 992 - RCVR - CD - CD - SETUP* - Audio  
code  
L
L
Press and release TV. The Cinema 6+’s red light will  
blink twice.  
CD to CBL/SAT  
CBL/SAT to TV  
SETUP* - 992 - CBL/SAT - CD - CD - SETUP* -  
Cable/DBS code  
SETUP* - 992 - TV - CBL/SAT - CBL/SAT -  
SETUP* - TV code  
Now, whenever you press VOL , VOL  
or MUTE in the  
VCR, DVD/LD and CBL/SAT modes your TV will control the  
volume. If you would like to change the Volume Lock setting to  
the VCR, DVD/LD or CBL/SAT modes repeat steps 1-3, only  
substitute the appropriate device key. Setting the Volume Lock  
to the TV, VCR, DVD/LD or CBL/SAT mode will not effect the  
volume control in the RCVR and CD mode.  
CBL/SAT to VCR SETUP* - 992 - VCR - CBL/SAT - CBL/SAT -  
SETUP* - VCR code  
CBL/SAT to DVD/LD SETUP* - 992 - DVD/LD - CBL/SAT - CBL/SAT -  
SETUP* - DVD or LD code  
CBL/SAT to RCVR SETUP* - 992 - RCVR - CBL/SAT - CBL/SAT -  
SETUP* - Audio code  
You can also change the Volume Lock setting so that an  
Audio component controls the volume in all device modes.  
CBL/SAT to CD SETUP* - 992 - CD - CBL/SAT - CBL/SAT -  
SETUP* - CD Player code  
To change the Volume Lock setting on the Cinema 6+ to the  
RCVR mode:  
*NOTE: Here (*) you must hold SETUP until the Cinema 6+’s  
red light blinks twice.  
1.  
2.  
3.  
Press and hold SETUP until the Cinema 6+’s red  
light blinks twice, then release SETUP.  
PROGRAMMING THE MACRO KEYS  
or  
Press 9 - 9 - 3. The Cinema 6+’s red light will blink  
twice.  
The Cinema 6+ has two Macro keys (MACRO and  
MACRO2) that allow the user to play back a series of key-  
strokes, at any time, with the press of one key. For example,  
to set up a sequence that will turn on your components and  
change the components to the proper inputs:  
L
L
Press and release RCVR. The Cinema 6+’s red light  
will blink twice.  
1.  
Press and hold SETUP until the Cinema 6+’s red  
light blinks twice, then release SETUP.  
Now, whenever you press VOL , VOL or MUTE your  
Audio component will control the volume in all device modes.  
You can also change the Volume Lock setting so that each  
component controls its own volume. However, some compo-  
nents do not have volume control. Using this setting may  
eliminate volume control in some device modes. To change  
the Volume Lock setting on the Cinema 6+ so each mode  
controls its own volume:  
2.  
3.  
Press 9 - 9 - 5. The Cinema 6+’s red light will blink  
twice.  
Press and release one of the MACRO keys. This will  
be the key that will play back the series of key-  
strokes assigned to that key.  
4.  
Begin entering the sequence of keystrokes, up to 15,  
that you wish to be played back when you press the  
MACRO key. For example:  
1.  
2.  
3.  
Press and hold SETUP until the Cinema 6+’s red  
light blinks twice, then release SETUP.  
L
Press 9 - 9 - 3. The Cinema 6+’s red light will blink  
RCVR – POWER – TV – POWER – TV/VCR (To  
change the input on the TV to VIDEO 1) – CBL/SAT  
– POWER.  
twice.  
L
L
Press and release VOL . The Cinema 6+’s red  
light will blink twice.  
5.  
Once your sequence is entered, press and hold  
SETUP until the Cinema 6+’s red light blinks twice.  
Now, whenever you press press VOL , VOL or MUTE on  
the Cinema 6+ each component will control its own volume,  
provided each component has volume control.  
Now, using the example as above, whenever the pro-  
grammed MACRO key is pressed, the Receiver would power  
ON, the TV will power ON and change the input to VIDEO 1  
and then the Satellite would power ON.  
Repeat steps 1 - 5 to then setup a second sequence on the  
MACRO2 key.  
VOLUME LOCK  
Volume Lock allows the user to designate which component  
will control the volume in the TV, DVD/LD and CBL/SAT  
modes. To set the Volume Lock to the TV mode:  
1.  
Press and hold SETUP until the Cinema 6’s red light  
blinks twice, then release SETUP.  
26  
27  
 
TROUBLE SHOOTING  
Problem  
Solution  
Red light does not  
Replace the batteries with four (4) new AAA alka-  
blink when you press line batteries.  
a key?  
USING THE SLEEP KEY  
The SLEEP key allows you to access the sleep timer of your  
TV, Cable Converter/DBS Satellite or Audio component.You  
can access your TV, Cable Converter, DBS Satellite or Audio  
component’s Sleep Timer by pressing the SLEEP key. Most  
Sleep Timers advance in increments of 10 or 15 minutes,  
however, for specific instructions on setting your components  
Sleep Timer, please consult your original owner’s manual.  
The Cinema 6 does  
not operate your  
home entertainment  
components or is not tionality, however, only one setup code will operate  
performing com-  
mands properly?  
Try all of the codes listed for your brand of home  
entertainment component in the “Setup Codes” sec-  
tion. Many setup codes may allow for partial func-  
your home entertainment component correctly.  
Make sure that all of the components you are  
setting up can be operated with an infrared  
remote control.  
Problems program-  
ming a TV/VCR  
combo?  
Try the VCR set-up codes for your brand. However,  
some combo units may require both a TV code for  
volume control and a VCR code for the remaining  
functions.  
Even if your original Cable Converter remote control did not  
have a sleep timer, your Cinema 6+ has its own built-in sleep  
timer. If your Cable Converter does not have a sleep timer,  
press the SLEEP key to activate the Cinema 6+’s built-in  
sleep timer. For example:  
VCR not recording?  
As a safety feature on the Cinema 6, you must  
press the REC key twice.  
1.  
Press and release the CBL/SAT key then press the  
SLEEP key once to set the Cinema 6+’s built-in  
sleep timer for 15 minutes. The red light will blink  
once.  
L
CHL/ and PREV  
Due to RCA design (1983-1987), only the original  
remote control will operate these functions.  
CH not working for  
your RCA TV?  
2.  
Each additional press of the SLEEP key will add 15  
more minutes to the Sleep Timer, up to a maximum  
of 60 minutes. The LED will blink twice when the  
sleep timer is set for 30 minutes, 3 times for 45 min-  
utes, or 4 times for 60 minutes.  
Problems changing  
channels?  
If your original remote control required an Enter  
keystroke when changing channels, press the  
ENTER key on the Cinema 6 after you enter the  
channel number.  
NOTE: The sleep timer starts 10 seconds after  
The red light blinks  
when you press a  
key but you receive  
no response from  
your home  
Make sure you are aiming your Cinema 6 at your  
home entertainment component and that you are  
within 15 feet before using your remote.  
the last press of the SLEEP key. Once you have activated  
the Cinema 6+’s built-in sleep timer, you must keep the  
remote control aimed directly at the component.  
3.  
To de-activate the built-in sleep timer,press POWER.  
entertainment  
component?  
NOTE: Plugging your TV into the outlet on the back of the  
Cable Converter may allow you to turn both your Cable  
Converter and TV ON and OFF.  
Cinema 6 not learn-  
ing a command from  
your original remote  
control?  
Make sure your remote controls are nose-to-nose  
and are no more than 2 inches apart (see diagram  
in step 5 on page 22).  
Tried “Search  
Method” and still did  
not find the code?  
Try the “Search Method” again after clearing out the  
device key as follows: Press and hold SETUP until  
red light blinks twice, then release. Next enter 9 -9 -  
2. Then press and release the device key to be  
cleared twice.  
Sony’s Picture In  
Picture (PIP) won’t  
turn off?  
Press TV once. Press and hold SETUP until red  
light blinks twice, then release. Enter 9 - 9 - 4 and  
press SETUP once. Then enter 6 -2 -1 and press  
PIP On/Off. The red light should blink twice. PIP  
should operate properly now.  
Sharp’s Picture In  
Picture (PIP) won’t  
work properly?  
Sharp’s PIP feature requires separate PIP functions  
for “on” and “off”.  
For PIP “on”, press TV once. Press and hold SETUP  
until red light blinks twice, then release. Enter 9- 9-4  
and press SETUP once. Enter 3- 4-8 and press PIP  
On/Off. The red light should blink twice. PIP “on”  
should operate properly now.  
For PIP “off”, press TV once. Press and hold  
SETUP until red light blinks twice, then release.  
Enter 9- 9-4 and press SETUP once. Enter 6-0-6  
and press SETUP PIP On/Off. The red light should  
blink twice. PIP “off” should operate by pressing  
SETUP then the PIP key.  
28  
29  
 
®
ONE FOR ALL PRODUCTS  
TROUBLE SHOOTING (continued)  
Limited Warranty  
Problem  
Solution  
One For All (“OFA”) warrants, to the original purchaser only, that this  
product will be free from defects in materials and workmanship, under  
normal use, for ninety (90) days from the date of original purchase.  
Surround on Sony  
receiver will not  
turn on?  
Press RCVR once. Press and hold SETUP until red  
light blinks twice, then release. Enter 9- 9-4 and  
press SETUP once. Enter 3- 9-8 and press SUR-  
ROUND. Red light should blink twice. Surround  
should operate now.  
This warranty does not cover damage or failures caused by products  
or services not supplied by OFA, or which result from accident, mis-  
use, abuse, neglect, mishandling, misapplication, faulty installation,  
set-up adjustment, improper maintenance, alteration, maladjustment  
of consumer controls, modifications, commercial use, or that is attrib-  
utable to acts of God.  
Sony receiver will  
turn off but not  
back on?  
Try using the number pad on the Cinema 6 to turn  
the receiver back on. For example, try pressing 0 to  
turn on in the CD mode, or 4 to turn on in the Video  
1 mode. Other numeric keys will also turn the receiv-  
er on. If this doesn’t work, try the following:  
There are no express warranties except as listed above. OFA SHALL  
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAM-  
AGES RESULTING FROM THE USE OF THIS PRODUCT OR ARIS-  
ING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND  
IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, or limitations on how long an implied war-  
ranty lasts, so the above exclusions or limitations may not apply to  
you. This warranty gives you specific legal rights and you may also  
have other rights which vary from state to state.  
Press RCVR once. Press and hold SETUP until red  
light blinks twice, then release. Enter 9- 9 -4 and  
press SETUP once. Then enter 5- 9 -1 and press  
POWER. The red light should blink twice. Power  
should operate properly now.  
Audio component  
not fully-operational?  
Audio functionality may be split between codes. For  
example, Pioneer’s Tuner code 0014 works tuner  
presets, but only Amplifier code 0013 works power  
and volume. This also true for Sony’s Receiver code  
0158 and Misc. Audio code 0159.  
If some functionality is missing, try other codes to  
see if functionality resides there.  
To obtain warranty service for a defective product during the warranty  
period, please return the product, preferably in the original carton,  
along with your purchase receipt, to the store of original purchase. A  
note detailing the complaint would be helpful. The store, at its option,  
will replace or repair this product if found to be defective.  
Mini-system, book-  
shelf, or boombox  
not working?  
These systems may operate using a CD or Misc.  
Audio code. If the original remote control did not  
have a power key, press PL (or STOP) to turn on  
(or off) the system.  
One For All  
(330)-405-8655  
Consumer Help Line : 1-330-593-3335  
E-Mail Address : [email protected]  
30  
31  
 
Copyright 1999 by Universal Electronics Inc. No part of this publica-  
tion may be reproduced, transmitted, transcribed, stored in any  
retrieval system, or translated to any language, in any form or by  
any means, electronic, mechanical, magnetic, optical, manual, or  
otherwise, without the prior written permission of Universal Elec-  
tronics Inc.  
One For All and Cinema 6 are trademarks of Universal Electronics  
Inc.  
One For All is designed for compatibility in North America excluding  
Mexico.  
URC-6800-Cinema 6+  
1/01  
32  
 

Miele Cooktop 06 707 900 User Manual
Miller Electric Welder XMT 350 VS User Manual
Milwaukee Power Screwdriver 2401 20 User Manual
MTD Trimmer MT700 User Manual
NEC Flat Panel Television PX 42VP4DP A User Manual
NuTone Ventilation Hood WA6500 User Manual
Onkyo Stereo Receiver TX DS484 User Manual
Oregon Scientific Heart Rate Monitor SE128 User Manual
Oricom Answering Machine AM100 User Manual
Panasonic Telephone KX F750 User Manual