NetComm Computer Drive NP545 User Manual

Quick Start Guide  
The Quick Installation Guide will help you through the installation procedure for Windows  
98/ME/2000/XP including basic hardware and software installation, as well as checking for  
wireless network availability. All the instructions below assume that there is an unencrypted  
wireless network. For detailed instructions on using Ad-hoc or advanced options, please refer to  
the User Guide on the Resource CD.  
B. Hardware Installation  
1. Connect one end of the USB cable to the NP545.  
2. Connect the other end of the USB cable to the USB port on your computer.  
C. Check wireless connection for  
Windows 98/ME/2000  
A. Software Installation  
(Attention Windows XP user: Go directly to Step D.)  
1. Insert the Resource CD into your CD-ROM drive.  
After Installing the adapter, the adapter’s tray icon will appear in your system  
3. Click the Start button and choose Run. In the field that appears, enter F:\software\  
Setup.exe (“F” is the letter of your CD-ROM drive). Follow the InstallShield Wizard steps,  
and click the Finish button to finish the wizard.  
tray. If the icon is  
(green), a wireless connection has been established. If the icon  
is (gray), there is no connection. To establish a wireless connection, follow these  
steps below.  
Note: If Windows 2000 prompts “Digital Signature Not Found”, click Yes to continue the installation. If Windows XP warns about Windows  
Logo testing, click Continue Anyway to continue the installation.  
1. Double-click the icon  
and the configuration screen of the utility will appear you  
can also run the utility by clicking Start> Program> NetComm> NP545> NP545  
Wireless Client Utility. On the prompted configuration tab page, click the Site  
Survey tab of the Utility.  
3. After installing the software, please plug the adapter into your PC. If you need  
instructions as to how to do this, please refer to Section B. Hardware Installation. If  
you had plugged it into your PC already, please unplug it and plug it in again. The OS  
will automatically detect the adapter and setup the driver for the adapter. If it does not,  
please follow the Windows setup steps to finish the driver installation.  
2. On the Site Survey screen that appears, click the Rescan button to refresh the list.  
Highlight an SSID and click the Connect button to connect an available network.  
Note: If a well-balanced wireless network cannot be created, please refer to the User Guide on the Resource CD or your dealer for help.  
Note: You may be prompted to insert the Windows 98 CD-ROM, that’s because some components are needed, just follow the Windows  
message to complete it.  
If  
(or)  
appears in your system tray, congratulations! The installation of the NP545 is  
completed.  
NP545  
54Mbps Wireless USB Adapter  
 

Miele Ventilation Hood DA409 User Manual
Multiquip Water System MVH 304GHB User Manual
NAD DVD Player L56 User Manual
NEC Computer Monitor LCD1280 User Manual
NeumannBerlin Microphone KM D AES 42 User Manual
Nighthawk Carbon Monoxide Alarm KN COP DP User Manual
Nikon Scanner Transparency Unit User Manual
Oki Printer Accessories MB260 User Manual
Oster Toaster 125508 User Manual
Panasonic Digital Camera AK HC900P User Manual