NETGEAR Network Router R4500 User Manual

Step 3:  
Step 2:  
Step 1:  
Installation Guide  
Plug in, then turn on your modem.  
Connect one end of the yellow  
Unplug the power  
to turn off your modem.  
Ethernet cable ( ) to your modem,  
and the other end to the Internet port  
on your router.  
Wait approximately 2 minutes  
until your modem turns on.  
N900 Wireless Dual Band Gigabit Router  
R4500  
If your modem has a battery backup,  
first remove and reinsert the battery  
before connecting your  
DSL  
or Cable  
Package Contents  
modem to power.  
Internet  
(not included)  
Power On/Off  
Ethernet cable  
Power On/Off  
Modem  
Laptop or Desktop  
Computer  
N900 Wireless Router  
Step 5:  
Step 6:  
Connect your computer  
to the router ( ).  
Open a browser.  
Step 4:  
Power adapter  
Power cord  
If the web page does not  
display, close and re-open  
the browser, then enter  
in the address bar, or  
check the “Troubleshooting”  
section on the back of  
this installation guide.  
Connect the power adapter to the  
router, then plug it into an outlet.  
Use another Ethernet cable to establish  
a wired connection as shown in this diagram.  
N900 Wireless Router  
(with stand attached)  
2.4  
GHz  
Wait for the 2.4 GHz LED (  
to turn on.  
)
Optionally, connect wirelessly by using  
the preset wireless security settings  
located on the bottom label.  
If none of the LEDs turn on, make sure the  
Power On/Off button is in the ON position  
(pushed in).  
 

Miele Refrigerator KWT 4974 SG ed User Manual
Miller Electric Welding System 400P 500 X User Manual
Milwaukee Cordless Saw 2629 20 User Manual
MTD Log Splitter 5DM User Manual
Multiquip Power Roller RX1510 User Manual
Multi Tech Systems Network Card Model ISI3334 8 User Manual
Niles Audio Stereo System SVL 4AB User Manual
OK International Soldering Gun ps 900 User Manual
Optoma Technology Home Theater System ES526 User Manual
Oregon Scientific Weather Radio RMR383HGA User Manual