Panasonic Switch KX HNB600 User Manual

System Setup Guide  
Home Network System  
HUB  
Model No.  
KX-HNB600  
Thank you for purchasing a Panasonic product.  
This document explains how to configure the hub and access it using a mobile  
device. These steps must be followed before you can use the system.  
For details about how to use the system, refer to the User’s Guide (page 15).  
Please read this document before using the unit and save it for future reference.  
For assistance, visit our Web site: www.panasonic.com/support  
for customers in the U.S.A. or Puerto Rico.  
Printed in China  
 
Introduction  
Accessory information  
Supplied accessories  
No.  
A
Accessory item/Part number  
AC adaptor/PNLV2360Z  
Quantity  
1
1
1
B
Telephone line cord/PQJA10075Z  
Wall mounting adaptor/PNKL1049Z1  
C
A
B
C
Additional accessories  
microSD card (not supplied)  
A commercially-available microSD card must be inserted into the hub in order to record images  
from cameras. The following types of microSD cards are supported.  
R microSD / SDHC card: Up to 32 GB  
Note:  
R Please contact your nearest Panasonic dealer for sales information (page 21).  
Accessory item  
Model number  
T-adaptor  
KX-J66  
Other information  
R Design and specifications are subject to change without notice.  
R The illustrations in these instructions may vary slightly from the actual product.  
Trademarks  
R microSDHC Logo is a trademark of SD-3C, LLC.  
R iPhone and iPad are registered trademarks of Apple Inc.  
R iPad mini is a trademark of Apple Inc.  
R Android is a trademark of Google Inc.  
R Wi-Fi is a registered trademark of the Wi-Fi Alliance.  
R All other trademarks identified herein are the property of their respective owners.  
Notice  
R The hub supports microSD and microSDHC memory cards. In this document, the term  
“microSD card” is used as a generic term for any of the supported cards.  
3
 
   
Introduction  
Expanding the Panasonic Home Network System  
The Panasonic Home Network System lets you create a powerful wireless network of cameras,  
sensors, and smart plugs in your home, and control them all with an easy-to-use mobile app.  
Compatible devices are explained below. For information about the Home Network app, refer to  
the User’s Guide (page 15).  
The maximum number of devices for each device type is listed below.  
*1  
Digital Cordless Handset (KX-HNH100: 6 max.)  
R Makes and receives calls using your home landline  
R Can be used to change the system’s security mode  
R Displays system status  
R Receives notification when the sensors are triggered  
*2  
Indoor Camera (KX-HNC200: 4 max.  
)
R Full-color camera and built-in microphone for live monitoring  
and recording  
R Built-in visual sensor, audio sensor, and temperature sensor  
can be used to trigger other actions (camera recording, turning  
on a light, etc.)  
R Built-in microphone and speaker for two-way communication  
*2  
Outdoor Camera (KX-HNC600: 4 max.  
)
R Full-color camera with built-in microphone for live monitoring  
and recording  
R Built-in visual sensor and infrared sensor can be used to trigger  
other actions (camera recording, turning on a light, etc.)  
R Built-in microphone and speaker for two-way communication  
R Splash proof design for permanent, outdoor installation  
*3  
Window/Door Sensor (KX-HNS101: 50 max.  
)
R Detects when the corresponding window or door is opened  
R Can be used to trigger other events (camera recording, turning  
on a light, etc.)  
*3  
Motion Sensor (KX-HNS102: 50 max.  
)
R Detects motion in the surrounding area  
R Can be used to trigger other events (camera recording, turning  
on a light, etc.)  
 
4
Introduction  
*3  
Smart Plug (KX-HNA101: 50 max.  
)
R Can be turned on and off using the handset or Home Network  
app or when triggered by a sensor  
R Built-in overcurrent detection for added peace of mind  
R Power consumption is logged for your reference  
*1 Optional handsets may be a different color from that of the handset supplied as part of a  
pre-configured kit.  
*2 A total of 4 cameras (including indoor cameras and outdoor cameras) can be registered to  
the hub.  
*3 A total of 50 sensors (including motion sensors and window/door sensors) and smart plugs  
can be registered to the hub.  
Mobile devices  
Your mobile devices: 8 max.  
You can expand the system by installing the Home Network  
app on your mobile devices (smartphones, tablets, etc.) and  
registering your mobile devices to the hub.  
See page 11 for more information about the Home Network  
Note:  
R You must configure the hub’s Wi-Fi settings before you can  
use the app.  
5
 
     
Important Information  
Installation  
About this system  
R To prevent the risk of fire or electrical  
shock, do not expose the product to rain or  
any type of moisture.  
R Do not place or use this product near  
automatically controlled devices such as  
automatic doors and fire alarms. Radio  
waves emitted from this product may cause  
such devices to malfunction resulting in an  
accident.  
This system is an auxiliary system; it is not  
designed to provide complete protection from  
property loss. Panasonic will not be held  
responsible in the event that property loss  
occurs while this system is in operation.  
R Do not allow the AC adaptor or telephone  
line cord to be excessively pulled, bent or  
placed under heavy objects.  
R Keep small parts, such as microSD cards,  
out of the reach of children. There is a risk  
of swallowing. In the event they are  
swallowed, seek medical advice  
immediately.  
For your safety  
To prevent severe injury and loss of life/  
property, read this section carefully before  
using the product to ensure proper and safe  
operation of your product.  
WARNING  
Operating safeguards  
Power connection  
R Unplug the product from power outlets  
before cleaning. Do not use liquid or  
aerosol cleaners.  
R Use only the power source marked on the  
product.  
R Do not overload power outlets and  
extension cords. This can result in the risk  
of fire or electric shock.  
R Completely insert the AC adaptor/power  
plug into the power outlet. Failure to do so  
may cause electric shock and/or excessive  
heat resulting in a fire.  
R Regularly remove any dust, etc. from the  
AC adaptor/power plug by pulling it from  
the power outlet, then wiping with a dry  
cloth. Accumulated dust may cause an  
insulation defect from moisture, etc.  
resulting in a fire.  
R Unplug the product from power outlets if it  
emits smoke, an abnormal smell, or makes  
an unusual noise. These conditions can  
cause fire or electric shock. Confirm that  
smoke has stopped emitting and contact us  
R Unplug from power outlets and never touch  
the inside of the product if its casing has  
been broken open. Danger of electric shock  
exists.  
R Do not disassemble the product.  
R Do not spill liquids (detergents, cleansers,  
etc.) onto the telephone line cord plug, or  
allow it to become wet at all. This may  
cause a fire. If the telephone line cord plug  
becomes wet, immediately pull it from the  
telephone wall jack, and do not use.  
R Never put metal objects inside the product.  
If metal objects enter the product, turn off  
the circuit breaker and contact an  
authorized service center.  
Medical  
R Consult the manufacturer of any personal  
medical devices, such as pacemakers or  
hearing aids, to determine if they are  
adequately shielded from external RF  
(radio frequency) energy. DECT features  
operate between 1.92 GHz and 1.93 GHz  
with a peak transmission power of 115 mW.  
Wi-Fi features operate between 2.412 GHz  
and 2.462 GHz with a peak transmission  
power of 100 mW.  
R Never touch the plug with wet hands.  
Danger of electric shock exists.  
R Do not connect non-specified devices.  
R Do not use the product in health care  
facilities if any regulations posted in the  
area instruct you not to do so. Hospitals or  
health care facilities may be using  
6
 
   
Important Information  
equipment that could be sensitive to  
external RF energy.  
Security cautions  
Take appropriate measures to avoid the  
following security breaches when using this  
product.  
CAUTION  
Installation and location  
– Leaks of private information  
– Unauthorized use of this product  
– Unauthorized interference or suspension of  
the use of this product  
R Never install wiring during a lightning storm.  
R Never install telephone line jacks in wet  
locations unless the jack is specifically  
designed for wet locations.  
R Never touch uninsulated telephone wires or  
terminals unless the telephone line has  
been disconnected at the network interface.  
R Use caution when installing or modifying  
telephone lines.  
R The AC adaptor is used as the main  
disconnect device. Ensure that the AC  
outlet is installed near the product and is  
easily accessible.  
R This product is unable to make calls when:  
– there is a power failure.  
Take the following measures to avoid security  
breaches:  
R Configure the wireless router that connects  
your mobile device to this product to use  
encryption for all wireless communication.  
R You may be vulnerable to security  
breaches if the unit is used with the login  
password, disarm code, or PIN code, or  
other settings at their defaults values.  
Configure your own values for these  
settings.  
R Do not use passwords that could be easily  
guessed by a third party. If you keep a  
record of your passwords, protect that  
record. Change passwords regularly.  
R If you lose your mobile device, change the  
password used to access this product.  
R If you enable the product’s auto login  
feature, enable the screen lock or similar  
security feature on your mobile device.  
R Take care when performing important  
security related operations such as deleting  
MAC address, unit IDs, etc.  
R To prevent disclosure of personal  
information, enable the screen lock or  
similar security feature on your mobile  
device.  
R When submitting the product for repair,  
make a note of any important information  
stored in the product, as this information  
may be erased or changed as part of the  
repair process.  
– when the cordless handset or mobile  
device’s batteries need recharging or  
have failed.  
Important safety  
instructions  
When using your product, basic safety  
precautions should always be followed to  
reduce the risk of fire, electric shock, and  
injury to persons, including the following:  
1. Do not use this product near water for  
example, near a bathtub, washbowl,  
kitchen sink, or laundry tub, in a wet  
basement or near a swimming pool.  
2. Avoid using a telephone (other than a  
cordless type) during an electrical storm.  
There may be a remote risk of electric  
shock from lightning.  
R Before handing the product over to a third  
party for repair or other purposes, perform  
a factory data reset to erase any data  
stored in the product and remove the  
microSD card. Use only trusted repair  
services authorized by Panasonic.  
R Before disposing of the product, perform a  
factory data reset to erase any data stored  
3. Do not use the telephone to report a gas  
leak in the vicinity of the leak.  
4. Use only the power cord indicated in this  
document.  
SAVE THESE INSTRUCTIONS  
7
 
   
Important Information  
in the product. Remove and erase the  
microSD card.  
putting the hub on a bay window or near  
a window.)  
R If your mobile device will no longer be used  
with the product, delete your mobile  
device’s registration from the product and  
delete the corresponding app from your  
mobile device.  
R Coverage and voice quality depends on the  
local environmental conditions.  
R If the reception for a hub location is not  
satisfactory, move the hub to another  
location for better reception.  
R If this product experiences a power outage,  
its date and time setting may become  
incorrect. In this case, the date and time  
setting will be automatically corrected when  
your mobile device and this product are  
connected to the same wireless network.  
Environment  
R Keep the product away from electrical noise  
generating devices, such as fluorescent  
lamps and motors.  
R The product should be kept free from  
excessive smoke, dust, high temperature,  
and vibration.  
R The product should not be exposed to  
direct sunlight.  
R Do not place heavy objects on top of the  
product.  
Additionally, note the following.  
R Multiple hubs cannot be used on the same  
network.  
R Only one mobile device can access this  
product while away from home. If a second  
mobile device connects to this product  
while away from home, the first mobile  
device is disconnected.  
R Communications may be interrupted  
depending on network conditions and  
wireless signal quality.  
R This product may be used in ways that  
violate the privacy or publicity rights of  
others. You are responsible for the ways in  
which this product is used.  
R When you leave the product unused for a  
long period of time, unplug the product from  
the power outlet.  
R The product should be kept away from heat  
sources such as heaters, kitchen stoves,  
etc. It should not be placed in rooms where  
the temperature is less than 0 °C (32 °F) or  
greater than 40 °C (104 °F). Damp  
basements should also be avoided.  
R The maximum communication range may  
be shortened when the product is used in  
the following places: Near obstacles such  
as hills, tunnels, underground, near metal  
objects such as wire fences, etc.  
For best performance  
R Operating the product near electrical  
appliances may cause interference. Move  
away from the electrical appliances.  
Hub location/avoiding noise  
The hub and other compatible Panasonic  
devices use radio waves to communicate with  
each other.  
R For maximum coverage and noise-free  
communications, place your hub:  
– at a convenient, high, and central  
location with no obstructions between  
the devices and hub in an indoor  
environment.  
– away from electronic appliances such as  
TVs, radios, personal computers,  
wireless devices, or other phones.  
– facing away from radio frequency  
transmitters, such as external antennas  
of mobile phone cell stations. (Avoid  
Other information  
Routine care  
R Wipe the outer surface of the product with a  
soft moist cloth.  
R Do not use benzine, thinner, or any  
abrasive powder.  
Protecting your recordings  
R Do not remove the microSD card or  
disconnect the hub’s AC adaptor while  
8
 
   
Important Information  
reading or writing data to the microSD card.  
Data on the card could become corrupted.  
R If a microSD card malfunctions or is  
exposed to electromagnetic waves or static  
electricity, data on the card could become  
corrupted or erased. Therefore we  
recommend backing up important data to a  
computer or other device.  
Notice for product disposal, transfer,  
or return  
R This product can store your private/  
confidential information. To protect your  
privacy/confidentiality, we recommend that  
you erase information such as phonebook  
or caller list entries from the memory before  
you dispose of, transfer, or return the  
product.  
Notice  
9
 
Setup  
Indicator  
Status  
Green, lit  
Normal operation,  
connected to  
Part names and functions  
A
B
*1  
wireless router  
Green, blinking  
Registration mode  
Alternating:  
Green, blinking  
Yellow, blinking  
Hub is starting up  
(cannot be used  
*2  
yet)  
Red, lit  
Security system is  
armed  
Red, blinking quickly Security system was  
triggered  
C D E  
F
Yellow, lit  
Initial setup required  
Yellow, blinking  
Initial setup in  
progress, mobile  
device connected  
Yellow, blinking  
quickly  
Initial setup is  
starting  
G
H
I
Speaker  
LED indicator  
DC jack  
LINE jack  
MWi-Fi SETUPN  
*1 You can configure the hub so that its LED  
indicator does not light during normal  
operation. For more information, refer to  
the User’s Guide (page 15).  
*2 It may take some time for the hub to finish  
starting up.  
Used when performing initial setup.  
microSD card slot  
Used when inserting a microSD card.  
Remove the label when inserting.  
M
HANDSET/LOCATORN  
Used when registering a handset. You  
can also press this button to locate a  
misplaced handset.  
Connections  
Insert the AC adaptor plug firmly into the  
DC jack.  
M
CAMERAN  
Used when registering a camera.  
OTHER DEVICEN  
Secure the AC adaptor cord by wrapping  
it around the hook.  
Connect the AC adaptor to the power  
outlet.  
Insert the telephone line cord into the  
LINE jack and a single-line telephone jack  
(RJ11C) until you hear a click.  
M
Used when registering a sensor or smart  
plug.  
DSL/ADSL service users only: Connect  
your DSL/ADSL filter (not supplied).  
Outdoor Camera (KX-HNC600) or  
Indoor Camera (KX-HNC200) users  
only: Remove the label covering the card  
slot and then insert the microSD card (not  
supplied) into the slot with the notched  
LED indicator  
You can use the LED indicator to confirm the  
hub’s status.  
Indicator  
Status  
Off  
No power, or LED  
indicator is turned  
corner ( ) facing upwards ( ) until it  
1
2
clicks into place.  
*1  
off  
 
10  
         
Setup  
Note:  
R The AC adaptor should be connected to a  
vertically oriented or floor-mounted AC  
outlet. Do not connect the AC adaptor to a  
ceiling-mounted AC outlet, as the weight of  
the adaptor may cause it to become  
disconnected.  
R Use only the supplied Panasonic AC  
adaptor PNLV236.  
R A microSD card (not supplied) is required to  
record images from cameras. Refer to the  
information about the available microSD  
card (page 3).  
Power failure  
R To remove the microSD card, push in the  
microSD card and then remove it.  
4
R The hub will not work during a power failure.  
R The hub’s telephone features will not work  
during a power failure. We recommend  
connecting a corded-type telephone that  
does not use an AC adaptor to your  
telephone line. You can connect the  
telephone to the same telephone line jack  
as the hub by using a Panasonic T-adaptor  
(page 3).  
3
4
®
Wi-Fi settings  
5
After you have connected your hub, here is  
what you will need to do in order to access the  
system from your mobile device. Each  
procedure is explained in this chapter.  
1
1
Download  
Download the [Home Network] app to  
your mobile device.  
2
6
2
Initial setup  
Use the [Home Network] app to  
configure the hub to connect to your  
wireless router, and then register your  
mobile device to the hub.  
Downloading the [Home  
Network] app  
Download information is available at the web  
page listed below.  
1
2
Note about power connections  
AC adaptor connection  
homenetwork/  
R The AC adaptor must remain connected at  
all times. (It is normal for the adaptor to feel  
warm during use.)  
 
11  
   
Setup  
6
7
If necessary, enter the password required  
to connect to your wireless router and  
then tap [Next].  
R The hub and your mobile device  
connect to your wireless router.  
R If prompted, follow the on-screen  
instructions and connect your mobile  
device to your wireless router, start the  
app again, and then tap [Add Mobile  
Device].  
Compatible mobile devices  
®
®
iPhone 4 or later, iPad , or iPad mini™ (iOS  
6.0 or later) or an Android™ device (Android  
4.0 or later)  
Note:  
R The [Home Network] app may not function  
properly depending on the system  
environment, such as the model of your  
mobile device, peripherals connected to  
your mobile device, and the apps installed  
on your mobile device.  
When prompted, press MWi-Fi SETUPN  
on the hub.  
R Your mobile device will be registered  
to the hub.  
Initial setup  
8
9
When prompted, follow the on-screen  
instructions and set the password used to  
log in to the hub while away from home.  
Confirm the following before you begin.  
– Make sure you have installed the [Home  
Network] app on your mobile device  
– Make sure your mobile device can connect  
to the Internet  
– Make sure the hub and your wireless router  
are turned on and the hub’s LED indicator  
is lit in yellow  
Follow the on-screen instructions to finish  
setting up the hub.  
R The app’s home screen is displayed  
when initial setup is complete.  
Initial setup for Android devices  
– Make sure you know the network name  
(SSID) and password assigned to your  
wireless router  
1
2
3
Start the [Home Network] app.  
Tap [Set up the Hub].  
When prompted, press MWi-Fi SETUPN  
on the hub.  
R The LED indicator blinks in yellow.  
R The app temporarily changes your  
mobile device’s Wi-Fi setting so that it  
connects to the hub directly.  
Initial setup for iPhone, iPad  
1
2
3
Start the [Home Network] app.  
Tap [Set up the Hub].  
When prompted, press MWi-Fi SETUPN  
on the hub.  
4
If necessary, enter the password required  
to connect to your wireless router and  
then tap [Next].  
R The hub and your mobile device  
connect to your wireless router.  
R The LED indicator blinks in yellow.  
4
Change your mobile device’s Wi-Fi  
setting temporarily so that it connects to  
the hub directly.  
R Open your mobile device’s [Settings]  
app, tap [Wi-Fi], select “KX-HNB600”,  
enter “00000000” as the password,  
and then tap [Join].  
R If more than 1 item named  
“KX-HNB600” is displayed, wait  
approx. 10 minutes and perform this  
procedure from the beginning.  
5
6
When prompted, press MWi-Fi SETUPN  
on the hub.  
R Your mobile device will be registered  
to the hub.  
When prompted, follow the on-screen  
instructions and set the password used to  
log in to the hub while away from home.  
R The app’s home screen is displayed  
when initial setup is complete.  
5
Start the [Home Network] app again.  
12  
 
Setup  
Information about Wi-Fi  
communication  
The hub uses Wi-Fi to communicate with your  
wireless router. Refer to the following  
information when planning where to place the  
hub.  
Registering another mobile  
device  
After you have used your mobile device to  
perform the initial setup procedure, you can  
add other mobile devices to the system.  
Before following this procedure, make sure  
you have completed the Initial Setup  
procedure.  
Do not use the hub in the following areas or  
locations. Malfunction or interference to radio  
communication may result.  
R Indoor areas that have certain types of  
radio or mobile communications equipment  
R Locations near microwave ovens or  
Bluetooth devices  
R Indoor areas where antitheft devices or  
2.4 GHz frequency devices such as POS  
systems are used  
1
Using the mobile device that you want to  
register, download the [Home Network]  
app and then start the app.  
2
3
Tap [Add Mobile Device].  
When prompted, press MWi-Fi SETUPN  
on the hub.  
R Your mobile device will be registered  
to the hub.  
Do not place the hub in areas where the  
following materials or objects are located  
between the hub and the wireless router.  
These materials and objects may interfere  
with wireless communication or cause  
wireless transmission speed to become slower.  
R Metallic doors or shutters  
4
When prompted, follow the on-screen  
instructions and enter the password used  
to log in to the hub while away from home.  
R The app’s home screen is displayed.  
R Walls containing aluminum-sheet insulation  
R Walls made of concrete, stone, brick, or tin  
R Multiple walls  
Registering other devices  
to the hub  
R Steel shelving  
R Fireproof glass  
This procedure is not required for devices  
that were included as part of a bundle.  
Before you can use cameras, sensors, and  
smart plugs, they must be registered to the  
hub.  
If you purchased devices separately (i.e., not  
as part of a bundle), you must register each  
device to the hub.  
You can register each device by using the  
registration buttons or the [Home Network]  
app.  
 
13  
   
Setup  
Using registration buttons  
Using the app  
1
Hub:  
1
2
Start the [Home Network] app.  
Press and hold the registration button  
until the LED indicator blinks in green.  
R Press and hold the appropriate  
registration button (page 10) according  
to the device you want to register.  
From the [Home Network] app home  
screen, tap [Settings].  
3
4
5
Tap [Device Registration].  
Tap [Registration].  
M
HANDSET/LOCATORN: For  
Select the type of device that you want to  
register.  
handsets  
M
M
CAMERAN: For cameras  
OTHER DEVICEN: For sensors  
6
Handset:  
and smart plugs  
Place the handset on the charger.  
Devices other than handset:  
Press and hold the registration button on  
the device you want to register until the  
device’s LED indicator blinks in green.  
R When registration is complete, the hub  
sounds one long beep.  
2
Handset:  
Place the handset on the charger.  
Devices other than handset:  
Press and hold the device’s registration  
button until the device’s LED indicator  
blinks in green.  
R When registration is complete, the hub  
sounds one long beep.  
7
When prompted, configure the device  
name and location as desired, and then  
tap [OK].  
Note:  
Note:  
R If registration fails, the hub sounds several  
short beeps.  
R If registration fails, the hub sounds several  
short beeps.  
14  
 
Appendix  
Wireless communication  
range (DECT)  
Accessing the User’s Guide  
The User’s Guide is a collection of online  
documentation that helps you get the most out  
of the [Home Network] app.  
The wireless communication range of each  
device in the system from the hub is  
approximately 50 m (160 feet) indoors and  
approximately 300 m (1,000 feet) outdoors.  
Wireless communication may be unreliable  
when the following obstacles are located  
between the hub and other system devices.  
R Metal doors or screens  
1
iPhone/iPad  
Tap  
in the app’s home screen.  
Android devices  
Tap or press your mobile device’s  
menu button in the app’s home screen.  
2
Tap [User’s Guide].  
R Walls containing aluminum-sheet insulation  
R Walls made of concrete or corrugated iron  
R Double-pane glass windows  
Note:  
R You can also access the User’s Guide at  
the web page listed below.  
R Multiple walls  
R When using each device on separate floors  
or in different buildings  
Note:  
R Outdoor camera, indoor camera, smart  
plug:  
A device’s LED indicator will blink quickly in  
red if it is out of range of the hub. In this  
case, confirm all connections, including  
those of the hub.  
homenetwork/manual/  
R Window/door sensor, motion sensor:  
You can check the sensor’s communication  
status by pressing M  
N. If the LED  
indicator is lit in green or red, the sensor is  
communicating properly with the hub. If the  
LED indicator blinks in red, it is out of range  
of the hub.  
 
15  
   
Appendix  
2
Slide the wall mounting adaptor up until it  
clicks into place.  
Wall mounting  
You can use the included wall mounting  
adaptor to wall mount the hub if desired.  
R Make sure the “UP” mark on the wall  
mounting adaptor faces upwards.  
R Align and insert the tabs ( ) of the  
1
Note:  
wall mounting adaptor to the grooves  
( ) of the hub.  
2
R Make sure that the wall and the fixing  
method are strong enough to support the  
weight of the unit.  
1
Connect the AC adaptor and the  
telephone line cord to the hub.  
R Secure the AC adaptor cord by  
wrapping it around the hook.  
UP  
UP  
1
2
U
P
 
16  
 
Appendix  
3
Mount the hub on a wall then slide down  
to secure in place.  
R Pass the AC adaptor cord and the  
telephone line cord through the groove  
Removing the wall mounting adaptor  
While pushing the release levers (A) away  
from the center of the wall mounting adaptor,  
slide the adaptor down (B).  
( ) in the wall mounting adaptor.  
1
Wrap up the telephone line cord as  
shown to prevent the cord from being  
pinched.  
R This product is compliant with the  
following wall phone plate sizes (2  
types).  
A
A
83 mm (3 1/4 inches)  
102 mm (4 inches)  
2
3
R Fit the slots of the hub onto the  
corresponding wall phone plate tabs  
for ( ) and ( ) respectively.  
4
5
1
4
B
5
4
5
2
3
 
17  
Appendix  
Specifications  
Open source software  
notice  
R Parts of this product use open source  
software supplied based on the relevant  
conditions of the Free Software  
Foundation’s GPL and/or LGPL and other  
conditions. Please read all licence  
information and copyright notices related to  
the open source software used by this  
product. This information is available at the  
following web page:  
R Standards  
DECT:  
DECT 6.0 (Digital Enhanced Cordless  
Telecommunications 6.0)  
Wi-Fi:  
IEEE 802.11 b/g/n  
R Frequency range  
DECT:  
1.92 GHz – 1.93 GHz  
Wi-Fi:  
2.412 GHz – 2.462 GHz (channels 1 – 11)  
R RF transmission power  
DECT:  
homenetwork/  
At least three (3) years from delivery of this  
product, Panasonic System Networks Co.,  
Ltd. will give to any third party who contacts  
us at the contact information provided  
below, for a charge of no more than the  
cost of physically distributing source code,  
a complete machine-readable copy of the  
corresponding source code and the  
copyright notices covered under the GPL  
and the LGPL. Please note that software  
licensed under the GPL and the LGPL is  
not under warranty.  
115 mW (max.)  
Wi-Fi:  
100 mW (peak transmission power)  
R Encryption  
WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/  
AES), WEP (128/64 bit)  
R Simplified configuration  
WPS (PBC)  
R Power source  
120 V AC, 60 Hz  
R Power consumption  
Standby: Approx. 3.5 W  
Maximum: Approx. 4.0 W  
R Operating conditions  
0 °C – 40 °C (32 °F – 104 °F)  
20% – 80% relative air humidity (dry)  
R Alert tone volume  
High alert level: approx. 90 dB  
Low alert level: approx. 73 dB  
(measured approx. 10 cm (3 15/16 inches)  
in front of the center of the unit)  
R Dimensions  
homenetwork/  
Software information  
R The End User License Agreement (EULA)  
for the Home Network app is available at  
the following web page:  
homenetwork/  
Approx. 42 mm ´ 130 mm ´ 130 mm (1  
21/32 inches ´ 5 1/8 inches ´ 5 1/8 inches)  
R Mass (weight)  
Approx. 220 g (0.49 lb)  
18  
 
     
Appendix  
The telephone company may make changes  
in its facilities, equipment, operations or  
procedures that could affect the operation of  
the equipment. If this happens the telephone  
company will provide advance notice in order  
for you to make necessary modifications to  
maintain uninterrupted service.  
FCC and other information  
This equipment complies with Part 68 of the  
FCC rules and the requirements adopted by  
the ACTA. On the bottom of this equipment is  
a label that contains, among other information,  
a product identifier in the format  
If trouble is experienced with this equipment,  
for repair or warranty information, please  
contact a Factory Service Center or other  
Authorized Servicer. If the equipment is  
causing harm to the telephone network, the  
telephone company may request that you  
disconnect the equipment until the problem is  
resolved.  
US:ACJ----------.  
If requested, this number must be provided to  
the telephone company.  
R Registration No.............(found on the  
bottom of the unit)  
R Ringer Equivalence No. (REN).......0.1B  
A plug and jack used to connect this  
equipment to the premises wiring and  
telephone network must comply with the  
applicable FCC Part 68 rules and  
requirements adopted by the ACTA. A  
compliant telephone cord and modular plug is  
provided with the product. It is designed to be  
connected to a compatible modular jack that is  
also compliant.  
Connection to party line service is subject to  
state tariffs. Contact the state public utility  
commission, public service commission or  
corporation commission for information.  
If your home has specially wired alarm  
equipment connected to the telephone line,  
ensure the installation of this equipment does  
not disable your alarm equipment. If you have  
questions about what will disable alarm  
equipment, consult your telephone company  
or a qualified installer.  
The REN is used to determine the number of  
devices that may be connected to a telephone  
line. Excessive RENs on a telephone line may  
result in the devices not ringing in response to  
an incoming call. In most but not all areas, the  
sum of RENs should not exceed five (5.0). To  
be certain of the number of devices that may  
be connected to a line, as determined by the  
total RENs, contact the local telephone  
company. For products approved after July  
23, 2001, the REN for the product is part of  
the product identifier that has the format  
US:AAAEQ##TXXXX. The digits represented  
by ## are the REN without a decimal point  
(e.g., 03 is a REN of 0.3).  
This equipment is hearing aid compatible as  
defined by the FCC in 47 CFR Section 68.316.  
When you hold the phone to your ear, noise  
might be heard in your Hearing Aid. Some  
Hearing Aids are not adequately shielded from  
external RF (radio frequency) energy. If noise  
occurs, use an optional headset accessory or  
the speakerphone option (if applicable) when  
using this phone. Consult with your audiologist  
or Hearing Aid manufacturer about the  
availability of Hearing Aids which provide  
adequate shielding to RF energy commonly  
emitted by digital devices.  
If this equipment causes harm to the  
telephone network, the telephone company  
will notify you in advance that temporary  
discontinuance of service may be required.  
But if advance notice isn’t practical, the  
telephone company will notify the customer as  
soon as possible. Also, you will be advised of  
your right to file a complaint with the FCC if  
you believe it is necessary.  
WHEN PROGRAMMING EMERGENCY  
NUMBERS AND(OR) MAKING TEST CALLS  
TO EMERGENCY NUMBERS:  
1. Remain on the line and briefly explain to  
the dispatcher the reason for the call.  
19  
 
 
Appendix  
2. Perform such activities in the off-peak  
hours, such as early morning or late  
evenings.  
prevent such interference, the base of the  
cordless telephone should not be placed near  
or on top of a TV or VCR. If interference is  
experienced, move the cordless telephone  
further away from the TV or VCR. This will  
often reduce or eliminate interference.  
This device complies with Part 15 of the FCC  
Rules. Operation is subject to the following  
two conditions:  
(1) This device may not cause harmful  
interference, and (2) this device must accept  
any interference received, including  
interference that may cause undesired  
operation.  
FCC RF Exposure Warning:  
R This product complies with FCC radiation  
exposure limits set forth for an uncontrolled  
environment.  
R To comply with FCC RF exposure  
requirements, the hub must be installed  
and operated 20 cm (8 inches) or more  
between the product and all person’s body.  
R This product may not be collocated or  
operated in conjunction with any other  
antenna or transmitter.  
R For body-worn operation, the handset must  
be used only with a non-metallic accessory.  
Use of other accessories may not ensure  
compliance with FCC RF exposure  
requirements.  
Privacy of communications may not be  
ensured when using this phone.  
CAUTION:  
Any changes or modifications not expressly  
approved by the party responsible for  
compliance could void the user’s authority to  
operate this device.  
NOTE:  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate  
radio frequency energy and, if not installed  
and used in accordance with the instructions,  
may cause harmful interference to radio  
communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user  
is encouraged to try to correct the interference  
by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the  
equipment and receiver.  
Notice:  
R FCC ID can be found on the bottom of the  
unit.  
– Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
– Consult the dealer or an experienced radio/  
TV technician for help.  
Some cordless telephones operate at  
frequencies that may cause interference to  
nearby TVs and VCRs. To minimize or  
20  
 
Appendix  
Customer services  
Customer Services Directory (United States and Puerto Rico)  
Obtain Product Information and Operating Assistance; locate your nearest  
Dealer or Service Center; purchase Parts and Accessories; or make Customer  
Service and Literature requests by visiting our Web Site at:  
or, contact us via the web at:  
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),  
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
Accessory Purchases (United States and Puerto Rico)  
Purchase Parts, Accessories and Owner’s Manual online for all  
Panasonic Products by visiting our Web Site at:  
or, send your request by E-mail to:  
You may also contact us directly at:  
1-800-237-9080 (Fax Only)  
(Monday - Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Avenue S., Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American Express.)  
For hearing or speech impaired TTY users, TTY: 1-866-605-1277  
21  
 
 
Appendix  
Warranty (For United States and Puerto Rico)  
Panasonic Home Network System Products  
Limited Warranty  
Limited Warranty Coverage  
If your product does not work properly because of a defect in materials or workmanship,  
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length  
of the period indicated on the chart below, which starts with the date of original purchase  
(“Limited Warranty period”), at its option either (a) repair your product with new or  
refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or  
(c) refund your purchase price. The decision to repair, replace or refund will be made by  
the warrantor.  
Parts  
Labor  
Home Network System Products  
microSD card (Included model only)  
One (1) Year  
90 days  
One (1) Year  
N/A  
During the “Labor” Limited Warranty period there will be no charge for labor. During the  
“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your  
product prepaid during the Limited Warranty period. This Limited Warranty excludes both  
parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited  
Warranty only applies to products purchased and serviced in the United States or Puerto  
Rico. This Limited Warranty is extended only to the original purchaser and only covers  
products purchased as new.  
Mail-In Service--Online  
Online Repair Request  
To submit a new repair request and for quick repair status visit our Web Site at  
When shipping the unit carefully pack in a padded shipping carton, include all  
accessories, and send it prepaid. Include a letter detailing the complaint, a return  
address and provide a day time phone number where you can be reached. P.O. Boxes  
are not acceptable. Keep the tracking number for your records. A copy of valid  
registered receipt is required under the 1 year parts and labor Limited Warranty.  
For Limited Warranty service for headsets if a headset is included with this  
product please follow instructions above.  
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE  
PURCHASER WILL BE REQUIRED TO FURNISH A SALES  
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,  
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE  
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH  
PROOF OF PURCHASE.  
22  
 
 
Appendix  
Limited Warranty Limits And Exclusions  
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,  
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty  
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are  
caused by products not supplied by the warrantor, or failures which result from accidents,  
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty  
installation, set-up adjustments, misadjustment of consumer controls, improper  
maintenance, power line surge, lightning damage, modification, introduction of sand,  
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or  
rental use of the product, or service by anyone other than a Factory Service Center or  
other Authorized Servicer, or damage that is attributable to acts of God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED  
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR  
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this  
excludes damages for lost time, lost calls or messages, cost of having someone remove or  
re-install an installed unit if applicable, travel to and from the servicer. The items listed are  
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,  
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE  
PERIOD OF THE LIMITED WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, or limitations on how long an implied warranty lasts, so the exclusions may not  
apply to you.  
This Limited Warranty gives you specific legal rights and you may also have other rights  
which vary from state to state. If a problem with this product develops during or after the  
Limited Warranty period, you may contact your dealer or Service Center. If the problem is  
not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department  
at the addresses listed for the warrantor.  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,  
ARE YOUR RESPONSIBILITY.  
When you ship the product  
• Carefully pack your unit, preferably in the original carton.  
• Attach a letter, detailing the symptom.  
• Send the unit to Panasonic Exchange Center, prepaid and adequately insured.  
• Do not send your unit to Panasonic Corporation of North America listed on the back  
cover or to executive or regional sales offices. These locations do not repair consumer  
products.  
23  
 
IMPORTANT!  
If your product is not working properly. . .  
A
Check if telephone line cord is connected.  
B
Use the Home Network app to access the User’s Guide  
and refer to the Troubleshooting section.  
• FAQ and troubleshooting hints are available.  
For your future reference  
We recommend keeping a record of the following information to assist with any repair under  
warranty.  
Serial No.  
Date of purchase  
(found on the bottom of the unit)  
Name and address of dealer  
Attach your purchase receipt here.  
Two Riverfront Plaza, Newark, NJ 07102-5490  
© Panasonic System Networks Co., Ltd. 2014  
 

Miele Oven K 1801 SF User Manual
Milan Technology Switch MIL S500 User Manual
MTD Lawn Mower 110A508R000 User Manual
MTD Tiller 217 100 300 User Manual
Nilfisk ALTO Vacuum Cleaner GU 700 A User Manual
Nortel Networks IP Phone MCC 3100 User Manual
Omnimount TV Mount 4N1 S User Manual
Palsonic Flat Panel Television TFTV663R User Manual
Panasonic Electric Shaver ES8109 User Manual
Panasonic Turntable SL DZ1200 User Manual