Panasonic Smoke Alarm 6362 User Manual

Fire alarm system  
Rope elevator kit 6362  
A kit with all the necessary pieces for a rope elevator.  
General  
6362 is a kit to make a rope elevator for a  
detector and its base, e.g. detector 3304 and  
analog base 3312.  
Product applications  
The rope elevator is used with any of the  
Panasonic heat or smoke detectors plugged  
in a base, allowing the user to access a  
detector mounted on a high ceiling height, in  
order to perform a test, maintenance, replace  
the detector, etc.  
The kit  
The kit consists of the following:  
Protective cover for detector (6360)  
Cleat (to fix the rope & hang it up;  
not shown in the figure above)  
20 m rope (Ø2 mm polyester)  
Metal plate  
Two screws (to fix the base)  
Two loop screws (for the rope)  
Two wood screws (to fix the cleat)  
Connection box (five screw term.)  
Cable clamp (for the conn. box)  
Rope clamp (to fix the rope)  
Cable clamp (to fix the cable)  
Panasonic Electric Works Fire & Security Technology Europe AB  
Citadellsvägen 23, SE-211 18 Malmö, Sweden  
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99  
 

Milan Technology Switch MIL S3580 User Manual
Multiquip Pet Fence mtr 40hs User Manual
NETGEAR Network Router R4500 User Manual
Nilfisk ALTO Carpet Cleaner 05210F User Manual
Omega Engineering Modem LDM30 User Manual
Onkyo Speaker System ED 901 User Manual
Optimus Cassette Player 120 2117 User Manual
Panasonic Cordless Telephone KX TGC212E User Manual
Panasonic Electric Shaver ESLA93 User Manual
ParaBody Home Gym 810101 User Manual