Panasonic Network Card 2SD1821A User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SD1821A  
Silicon NPN epitaxial planar type  
For high breakdown voltage low-frequency and low-noise  
amplication  
Package  
Code  
Features  
High collector-emitter voltage (Base open) VCEO  
Low noise voltage NV  
SMini3-G1  
S-Mini type package, allowing downsizing of the equipment and automatic  
insertion through the tape packing.  
Pin Name  
1. Base  
2. Emitter  
3. Collector  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector current  
Symbol  
VCBO  
VCEO  
VEBO  
IC  
Rating  
Unit  
V
Marking Symbol: L  
185  
185  
V
5
50  
V
mA  
mA  
mW  
°C  
Peak collector current  
ICP  
100  
Collector power dissipation  
Junction temperature  
PC  
150  
Tj  
150  
Storage temperature  
T
stg  
–55 to +150  
°C  
Electrical Characteristics Ta = 25°C±3°C  
Parameter  
Symbol  
Conditions  
Min  
185  
5
Typ  
Max  
Unit  
V
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector-base cutoff current (Emitter open)  
Forward current transfer ratio *  
Collector-emitter saturation voltage  
Transition frequency  
VCEO IC = 100 mA, IB = 0  
VEBO IE = 10 mA, IC = 0  
V
ICBO  
hFE  
VCB = 100 V, IE = 0  
1
330  
1
mA  
VCE = 5 V, IC = 10 mA  
130  
VCE(sat) IC = 30 mA, IB = 3 mA  
V
fT  
VCB = 10 V, IE = –10 mA, f = 200 MHz  
150  
2.3  
MHz  
Collector output capacitance  
Cob  
VCB = 10 V, IE = 0, f = 1 MHz  
pF  
(Common base, input open circuited)  
VCB = 10 V, IC = 1 mA, GV = 80 dB,  
Noise voltage  
NV  
150  
mV  
Rg = 100 k, Function = FLAT  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classication  
*
Rank  
R
S
hFE  
130 to 220  
185 to 330  
Publication date : October 2008  
SJC00425AED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
2SD1821A  
SMini3-G1  
Unit: mm  
+0.1  
0.0  
+0.10  
0.05  
0.3  
0.15  
3
1
2
(0.65)  
(0.65)  
1.3 ±0.1  
2.0 ±0.2  
SJC00425AED  
3
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any  
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any  
other company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.  
20080805  
 

Miele Washer W 500 User Manual
MTD Lawn Mower i1046 i1050 User Manual
Nikon Video Games AW110 User Manual
Niles Audio Fan FM 1 User Manual
Niles Audio Home Theater System ZR 6 User Manual
Nilfisk Advance America Vacuum Cleaner BRV 900 User Manual
NordicTrack Treadmill NTTL24992 User Manual
One for All Universal Remote URC 9040 User Manual
Panasonic Electric Shaver ES2025 User Manual
ParaBody Home Gym PBF011AB User Manual