Panasonic Network Card 2SD1820G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SD1820G  
Silicon NPN epitaxial planar type  
For general amplification  
Complementary to 2SB1219G  
Features  
Package  
Low collector-emitter saturation voltage VCE(sat)  
S-Mini type package, allowing downsizing of the equipment and  
automatic insertion through the tape packing and the magazine  
packing.  
Code  
SMini3-F2  
Marking Symbol: X  
Pin Name  
1: Base  
Absolute Maximum Ratings Ta = 25°C  
2: Emitter  
Parameter  
Symbol  
Rating  
Unit  
V
3: Collector  
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
60  
50  
V
5
V
Collector current  
IC  
ICP  
PC  
Tj  
500  
mA  
A
Peak collector current  
Collector power dissipation  
Junction temperature  
Storage temperature  
1
150  
mW  
°C  
°C  
150  
Tstg  
55 to +150  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VCEO  
VEBO  
ICBO  
Conditions  
Min  
60  
50  
5
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector-base cutoff current (Emitter open)  
IC = 10 µA, IE = 0  
IC = 2 mA, IB = 0  
V
IE = 10 µA, IC = 0  
V
VCB = 20 V, IE = 0  
0.1  
µA  
1
2
Forward current transfer ratio *  
hFE1  
hFE2  
VCE = 10 V, IC = 150 mA  
VCE = 10 V, IC = 500 mA  
85  
40  
340  
*
1
Collector-emitter saturation voltage *  
VCE(sat) IC = 300 mA, IB = 30 mA  
0.35  
200  
6
0.60  
15  
V
MHz  
pF  
1
Transition frequency *  
fT  
VCB = 10 V, IE = −50 mA, f = 200 MHz  
Collector output capacitance  
Cob  
VCB = 10 V, IE = 0, f = 1 MHz  
(Common base, input open circuited)  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. 1: Pulse measurement  
*
2: Rank classification  
*
Rank  
Q
85 to 170  
XQ  
R
120 to 240  
XR  
S
170 to 340  
XS  
No-rank  
85 to 340  
X
hFE1  
Marking symbol  
Product of no-rank is not classified and have no marking symbol for rank.  
Publication date: May 2007  
SJC00373AED  
 
1
This product complies with the RoHS Directive (EU 2002/95/EC).  
SMini3-F2  
Unit: mm  
2.00 0.20  
0.30 +00..0025  
3
1
2
0.13 +00..0025  
(0.65)  
(0.65)  
1.30 0.10  
(5°)  
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

MTX Audio Portable Speaker T5512 44 User Manual
NETGEAR Network Router NR3000 User Manual
Nikon Camcorder S2H05000501 User Manual
Numark Industries Stereo Amplifier PA5Pro User Manual
Onkyo Stereo Amplifier A 9211 User Manual
Opticon Scanner LH2 User Manual
Panasonic Computer Monitor BT LH80WE User Manual
Panasonic Cordless Telephone KXTG6842B User Manual
Panasonic Personal Computer CF E1M User Manual
Parkside Sander PHS 160 A1 User Manual