Panasonic Network Card 2SA1018 User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SA1018  
Silicon PNP epitaxial planar type  
For general amplification  
Unit: mm  
5.0 0.2  
4.0 0.2  
Complementary to 2SC1473  
Features  
High collector-emitter voltage (Base open) VCEO  
0.7 0.1  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
VCBO  
VCEO  
VEBO  
IC  
Rating  
250  
Unit  
V
+0.15  
+0.15  
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector current  
0.45  
0.45  
–0.1  
–0.1  
+0.6  
+0.6  
2.5  
–0.2  
2.5  
–0.2  
200  
V
5  
V
1
2
3
70  
mA  
mA  
mW  
°C  
1 : Emitter  
2 : Collector  
3 : Base  
Peak collector current  
ICP  
100  
Collector power dissipation  
Junction temperature  
PC  
750  
TO-92-B1 Package  
Tj  
150  
Storage temperature  
Tstg  
55 to +150  
°C  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCEO  
VEBO  
ICEO  
Conditions  
Min  
200  
5  
Typ  
Max  
Unit  
V
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector-emitter cut-off current (Base open)  
Forward current transfer ratio *  
Collector-emitter saturation voltage  
Transition frequency  
IC = −100 µA, IB = 0  
IE = −1 µA, IC = 0  
V
VCE = −120 V, IB = 0  
VCE = 10 V, IC = 5 mA  
1  
µA  
hFE  
60  
50  
220  
1.5  
VCE(sat) IC = −50 mA, IB = −5 mA  
V
fT  
VCB = −10 V, IE = 10 mA, f = 200 MHz  
MHz  
pF  
Collector output capacitance  
Cob  
VCB = 10 V, IE =0, f = 1 MHz  
10  
(Common base, input open circuited)  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
Q
R
hFE  
60 to 150  
100 to 220  
Publication date: January 2003  
SJC00008BED  
1
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Miele Microwave Oven 09 924 540 User Manual
Miller Electric Welder Arc Welding Power Source User Manual
Milwaukee Portable Multimedia Player SM102 User Manual
NEC Computer Monitor JC 1576VMB User Manual
NETGEAR Portable Multimedia Player NTV250 100NAS User Manual
Nextbook Laptop NEXT8P12 User Manual
Nexus 21 Marine Radio NX WIRELESS WIND TRANSDUCER User Manual
NordicTrack Home Gym NTB49030 User Manual
Olympus Printer 330N User Manual
Panasonic Computer Drive CF VDD283 User Manual