Panasonic Cell Phone EB GD30 User Manual

Operating Instructions  
EB-GD30  
Main Kit  
Digital Cellular Telephone  
Before operating this equipment please read these instructions  
completely.  
 
Contents  
Introduction. . . . . . . . . . . . . . . . . . . . . . . . 1  
Symbols Used . . . . . . . . . . . . . . . . . . . . . . 1  
Using This Manual. . . . . . . . . . . . . . . . . . . . 1  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Getting Started . . . . . . . . . . . . . . . . . . . . . . 4  
Fitting/Removing the SIM . . . . . . . . . . . . . . . . 4  
Fitting/Removing the Battery . . . . . . . . . . . . . . 5  
Charging the Battery . . . . . . . . . . . . . . . . . . 6  
Low Battery Warning . . . . . . . . . . . . . . . . . . 6  
Location of Controls . . . . . . . . . . . . . . . . . . . 7  
Display. . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Basic Operation . . . . . . . . . . . . . . . . . . . . . 9  
Power On/Off . . . . . . . . . . . . . . . . . . . . . . 9  
Making a Call . . . . . . . . . . . . . . . . . . . . . . 9  
Automatic Redial . . . . . . . . . . . . . . . . . . . . 10  
Ending a Call . . . . . . . . . . . . . . . . . . . . . . 10  
Answering a Call . . . . . . . . . . . . . . . . . . . . 10  
Volume Control. . . . . . . . . . . . . . . . . . . . . 11  
Vibration Alert . . . . . . . . . . . . . . . . . . . . . 12  
Key Guard . . . . . . . . . . . . . . . . . . . . . . . 12  
Phone Clock . . . . . . . . . . . . . . . . . . . . . . 13  
Phone Security . . . . . . . . . . . . . . . . . . . . . 16  
Phone Lock . . . . . . . . . . . . . . . . . . . . . . 16  
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Changing Security Codes . . . . . . . . . . . . . . . 17  
Advanced Operation . . . . . . . . . . . . . . . . . . 18  
DTMF Tones . . . . . . . . . . . . . . . . . . . . . . 18  
Alert Profile. . . . . . . . . . . . . . . . . . . . . . . 18  
Call Hold and Call Waiting . . . . . . . . . . . . . . . 19  
Call Transfer . . . . . . . . . . . . . . . . . . . . . . 20  
Multi-party Calls . . . . . . . . . . . . . . . . . . . . 20  
Phonebook Basics . . . . . . . . . . . . . . . . . . . 22  
Storing a Number . . . . . . . . . . . . . . . . . . . 22  
Browsing Phonebooks by Name or Location . . . . . 23  
 
Retrieving a Number . . . . . . . . . . . . . . . . . . 23  
Editing Phonebook Entries . . . . . . . . . . . . . . . 24  
Hot Key Phone Numbers. . . . . . . . . . . . . . . . 24  
Advanced Phonebook . . . . . . . . . . . . . . . . . 25  
Note Pad . . . . . . . . . . . . . . . . . . . . . . . . 25  
Recent Numbers . . . . . . . . . . . . . . . . . . . . 25  
Fixed Dial . . . . . . . . . . . . . . . . . . . . . . . 26  
Service Dial . . . . . . . . . . . . . . . . . . . . . . 27  
Short Text Messages . . . . . . . . . . . . . . . . . . 28  
Setting your Phone for Short Text Messages . . . . . . . 28  
Sending a Short Text Message . . . . . . . . . . . . 29  
Using Pre-Defined Messages . . . . . . . . . . . . . 29  
Receiving Short Text Messages . . . . . . . . . . . . 30  
Cell Broadcasts . . . . . . . . . . . . . . . . . . . . 31  
Alpha Entry . . . . . . . . . . . . . . . . . . . . . . . 32  
Menu Structures. . . . . . . . . . . . . . . . . . . . . 33  
Key Guard . . . . . . . . . . . . . . . . . . . . . . . 33  
Phonebook . . . . . . . . . . . . . . . . . . . . . . . 33  
Messages . . . . . . . . . . . . . . . . . . . . . . . 34  
Applications . . . . . . . . . . . . . . . . . . . . . . 35  
Personalise. . . . . . . . . . . . . . . . . . . . . . . 35  
Call Service . . . . . . . . . . . . . . . . . . . . . . 36  
Call Divert . . . . . . . . . . . . . . . . . . . . . . . 37  
Security . . . . . . . . . . . . . . . . . . . . . . . . 38  
Network . . . . . . . . . . . . . . . . . . . . . . . . 38  
Care and Maintenance . . . . . . . . . . . . . . . . . 40  
Glossary of Terms . . . . . . . . . . . . . . . . . . . 41  
Trouble Shooting . . . . . . . . . . . . . . . . . . . . 43  
Important Error Messages . . . . . . . . . . . . . . . 46  
Specifications . . . . . . . . . . . . . . . . . . . . . . 47  
Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
 
Introduction  
Introduction  
Thank you for purchasing this Panasonic GD30 digital cellular  
phone. This phone is designed to operate on the Global System  
for Mobile Communications (GSM), GSM900 or GSM1800.  
These operating instructions detail use of the equipment  
contained in the Main Kit.  
Some services are network dependent or may only be available  
on a subscription basis. Some functions are SIM dependent.  
For more information contact your Service Provider.  
Symbols Used  
F
Shows that you should press the following key(s).  
,Text-Shows that the display text will be flashing.  
Shows that the information is a Quick Tip.  
Using This Manual  
This manual is designed in sections to guide you through the  
many functions of this phone. Listed below is a brief outline of  
each section, to help you find the information you need.  
Getting Started: Details how to fit the battery, insert the SIM  
card, introduces the controls and display of the phone.  
Basic Operation: Details how to make and receive calls,  
change the phone volume, use Vibration Alert and Key Guard  
the Clock/Alarm.  
Phone Security: Details how to use the Phone Lock and PIN  
Security features as well as how to change security codes.  
Advanced Operation: Details how to send DTMF tones, create  
Alert Profiles, use Call Waiting, Call Transfer and Multi-party.  
Phonebook Basics: Details how to create, store, retrieve, and  
browse a number in a Phonebook as well as the more  
advanced Phonebook features.  
Advanced Phonebook: Details the operation of the Note Pad,  
Recent Number recall and limiting the numbers available using  
Fixed Dialling.  
 
1
Introduction  
Short Text Messages: Details how to set up your phone to  
receive and send Short Text Messages and to receive Cell  
Broadcasts.  
Alpha Entry: Details how to access alternative characters with  
the keypad.  
Menu Structures: Details the features that can be accessed  
from the phone menu.  
The remaining sections details how to take care of your phone,  
lists terms used in this manual, a Troubleshooting and Error  
Message section and the Specifications.  
 
2
Safety  
Safety  
This equipment is intended for use when supplied  
with power from the built-in charger or Dual Charger  
(EB-CRD30) through the AC Adaptor  
(EB-CAD70Vxx)*. Other usage will invalidate any  
approval given to this apparatus and may be  
dangerous. The use of approved accessories is  
recommended to ensure optimum performance and  
avoid damage to your phone.  
Switch off your cellular phone when in an aircraft. The  
use of cellular phones in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the  
cellular network and may be illegal. Failure to observe  
this instruction may lead to the suspension or denial  
of cellular phone services to the offender, or legal  
action or both.  
You are advised not to use the equipment at a  
refueling point. You are reminded of the need to  
observe restrictions on the use of radio equipment in  
fuel depots, chemical plants or where blasting  
operations are in progress. Never expose the battery  
pack to extreme temperatures (in excess of 60°C) or  
charge the battery pack for much longer than  
recommended.  
You MUST exercise proper control of your vehicle at  
all times. Do not use a hand held phone or  
microphone while you are driving. Find a safe place to  
stop first. Do not speak into a hands free microphone  
if it will take your mind off the road. Acquaint yourself  
thoroughly with restrictions concerning the use of  
cellular phones within the country you are driving and  
observe them at all times.  
Care must be taken when using the phone in close  
proximity to personal medical devices, such as  
pacemakers and hearing aids.  
* Where xx identifies the specific AC Adaptor region, eg CN, EU, HK, TW, UK.  
 
3
Getting Started  
Getting Started  
Fitting/Removing the SIM  
The SIM is fitted into a holder at the back of the phone  
underneath the battery.  
Fitting the SIM  
1
3
Removing the SIM  
To remove the SIM follow the above steps in reverse.  
 
4
Getting Started  
Fitting/Removing the Battery  
Fit a fully charged battery pack. If the battery pack is not fully  
charged then it must be charged as shown in “Charging the  
Battery”.  
Fitting the Battery  
Removing the Battery  
 
5
Getting Started  
Charging the Battery  
The battery pack must be attached to the phone before the AC  
Adaptor.  
NOTE: DO NOT force the connector as this may damage the phone  
and/or the AC Adaptor.  
When charging is complete remove the AC Adaptor.  
To maintain maximum performance of Ni-MH Battery Packs  
always use until the Low Battery Warning and then fully recharge.  
2
3
1
c
4
G
H
I
2
A
B
C
7
P
Q
R
S
5
J
3
1
K
L
D
E
*
8
c
F
4
T
U
V
6
G
H
I
2
M
N
O
0
A
B
C
7
+
9
P
Q
R
S
5
W
X
J
Y
K
L
3
Z
D
E
F
*
8
T
U
V
6
M
N
O
0
+
9
W
X
Y
Z
Operation of Battery Level Indicator  
While charging Charging complete  
Telephone on  
Telephone off  
K
K
H
Indicator off  
Low Battery Warning  
When the battery power is low a warning tone  
will sound and a LOW BATTERY message will  
flash. The power will automatically shut off  
shortly after the warning tone. Fully charge the  
battery pack or replace it with a fully charged  
one.  
LOW  
BATTERY  
During conversation finish your call immediately.  
 
6
Getting Started  
Location of Controls  
Antenna  
Incoming/charging  
indicator  
Earpiece  
c
1
2
A
B
C
4
G
H
I
3
D
E
F
5
Display  
J
K
L
7
P
Q
6
R
S
M
N
O
8 TU  
External  
Connector  
V
9
W
*
X
Y
Z
0
+
Microphone  
g
B
Navigation key – pressing up/down scrolls through  
options in the main area of the display or adjusts the  
volume. Pressing left/right scrolls through options in the  
option area of the display  
Select key – selects an option in the option area of the  
display  
A
D
C
accesses Phonebook or switches character types  
makes a call or recalls recently dialled phone numbers  
clears the last digit entered, clears all digits when  
pressed and held or returns to the previous display  
E
ends a call or switches the phone on/off when  
pressed and held  
Digit keys 0 to 9, * and # – the # key will switch on and  
off vibration alert  
 
7
Getting Started  
Display  
Main Display  
area  
Phone/SIM  
Phonebook  
indicator  
Panasonic  
Option area -  
shows options  
that can be  
Menu  
57  
>
selected by the  
Location area -  
indicates menu  
number, location  
number, alpha  
mode or alarm  
B key  
Navigation prompt - e scrolls through the  
main area of the display, f scrolls through  
options at the bottom right of the display.  
mark ?.  
Following some operations the display will automatically clear  
after three seconds or after pressing any key.  
Y
lights when you are registered to a non-home network -  
roaming  
t
]
[
lights when call divert is enabled  
lights when vibration alert is enabled  
lights when all tones or ring volume is off  
N
flashes when an unread message is stored or lights  
when message area is full  
O
S
lights when phone lock is enabled  
indicates that it is possible to make emergency calls  
T indicates the received signal strength - \weak  
signal, T strong signal  
H
>
indicates the battery level - H full, L low  
battery  
indicates that the source of the currently selected  
number is the Mobile Phonebook  
<
indicates that the source of the currently selected  
number is the SIM Phonebook  
?
displayed in the Location area indicates alarm is set  
p
indicates that the Navigation key (g) can be pressed  
 
8
Basic Operation  
Basic Operation  
Power On/Off  
To turn the phone on or off.  
F E and hold to switch power on  
A greeting will be displayed.  
F E and hold to switch  
Panasonic  
power off  
Making a Call  
Make sure that the phone is switched on and the signal strength  
meter is displayed.  
1 F area code and phone number  
00:01  
2 F D  
Voice Call  
Hold  
International Dialling  
Using the Automatic International Access Code “+” you will be  
able to dial international numbers without having to know the  
code for the international exchange.  
1 F 0 and hold until a “+” appears  
2 F country code or e to scroll through the  
abbreviated international  
names  
Country:  
3 F area code and phone  
UK  
number  
OK  
4 F D  
NOTE: Many countries include an initial “0” in the area code. This  
should, in most cases, be left out when dialling international  
numbers. If you have difficulties making international calls, contact  
your Service Provider.  
 
9
Basic Operation  
Emergency Calls  
To make an emergency call the antenna symbol (S) must be  
present.  
F 112 D or press B when “SOS” is displayed in  
the option area of the display  
Automatic Redial  
When a call is unsuccessful the phone will ask if you want to  
redial the phone number again automatically.  
F B when “OK” is displayed in the option  
area  
Auto Redial will countdown the display to the next  
redial.  
To stop redialling, press B when  
Auto Redial  
“Cancel” is displayed in the option  
00:32  
area  
Cancel  
If a call is repeatedly unsuccessful you will not be able to  
automatically redial the phone number. In this case you must  
redial the phone number manually.  
Ending a Call  
F E  
Answering a Call  
To receive a call the phone must be switched on and the signal  
strength meter must be displayed.  
F any key except E or g  
F E to reject the call  
Incoming  
If a call is not answered the  
number of unanswered calls will  
be displayed.  
Accept  
F any key to clear the display  
 
10  
Basic Operation  
Caller Identification  
This feature allows you to identify incoming  
calls and accept or reject them. The caller’s  
phone number, and name if stored in  
Phonebook, will be displayed.  
Home  
+01234567  
Accept  
NOTE: Caller Identification may not always be available.  
Volume Control  
Earpiece Volume  
Four levels of volume adjustment are available.  
During a call:  
00:05  
F a to decrease the  
volume  
Ear  
Volume  
F b to increase the  
volume  
Ring and Key Volume  
Changing the ring and key volume is done in the same way. If  
you increase the ring volume above maximum it will set an  
escalating ring tone. If you turn the ring volume off, the silent  
indicator icon ([) will be displayed.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Personalise”  
2 F B and e to point to “Tones”  
3 F B and e to point to “Ring Volume” or “Key Volume”  
4 F B  
5 Use e to set the volume  
6 F B  
 
11  
Basic Operation  
Vibration Alert  
When vibration alert is switched on the phone will  
vibrate when a call is received. Switching on  
vibration alert will silence the ring volume.  
However, when the ring volume is adjusted after  
the vibration alert is switched on, the phone will  
ring and vibrate when a call is received.  
During standby:  
F # and hold to switch  
on or off. When switched on,  
the phone will vibrate briefly  
Key Guard  
Key Guard will prevent any keys from being accidentally  
pressed e.g. when the phone is being carried.  
When “Menu” is displayed in the option area of the display:  
F B three times to enable Key Guard  
When a call is received Key Guard will be temporarily disabled,  
allowing you to press any key to answer the call. Emergency  
calls can still be made.  
Disabling Key Guard  
GSM 001  
F B twice when “Free” is  
displayed in the option area of the  
Keys Guarded  
display.  
Free  
 
12  
Basic Operation  
Phone Clock  
This phone incorporates a clock with date/time, an alarm and a  
power on/off feature.  
Initially Setting the Clock  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Applications”  
2 F B and e to point to “Clock Function”  
3 F B and e to point to “Clock Set”  
4 F B  
5 F enter the digits for the date in the format  
day/month/year  
6 F B  
Time:  
7 F enter the digits for the  
HH:MM  
time using 24 hour clock  
0-9  
8 F B  
Setting the Clock Format  
1 F B and e to point to “Applications”  
2 F B and e to point to “Clock Function”  
3 F B and e to point to “Clock Format”  
4 F B  
5 F e to select the format of clock and/or date  
6 F B  
Setting the Alarm  
NOTE: If you have not already set the clock, you will be asked to do  
so prior to setting the alarm.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Applications”  
2 F B and e to point to “Clock Function”  
3 F B and e to point to “Alarm Set”  
4 F B  
5 F enter the digits for the time  
6 F B  
 
13  
Basic Operation  
7 F e to select the frequency of the alarm  
8 F B  
Alarm:  
Once the alarm has been set, ? will be  
Repeat Daily  
displayed when the phone is in standby mode.  
Ok  
Muting the Alarm  
When the set time is reached the alarm will sound and the  
display will flash with an alarm message. The alarm will sound  
for 30 seconds. If the alarm goes off during a call, it will activate  
vibration alert.  
To end the alarm:  
F any key  
Disabling the Alarm  
To disable the alarm point to “Alarm Set”  
1 F B twice  
2 F e to point to “Disabled”  
3 F B  
Adjusting the Alarm Time  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Applications”  
2 F B and e to point to “Clock Function”  
3 F B and e to point to “Alarm Set”  
4 F B  
5 F C four times  
6 F enter the digits for the time  
7 F B  
8 F e to select the frequency of the alarm  
9 F B  
 
14  
Basic Operation  
Setting a Power On/Off Time  
You can set your phone to turn itself on or off automatically at a  
specified time using the Power On/Off feature. The procedure  
for setting the Power On/Off automatically is similar to that for  
setting the Alarm. Adjustment of the Power On/Off Time is also  
similar to that for the alarm. For either setting or adjusting the  
time you need to select “Power On Time” or “Power Off Time” in  
the “Clock Function” menu.  
 
15  
Phone Security  
Phone Security  
There are a number of security features for this phone that will  
protect against unauthorized use, and enable you to restrict  
access to certain features.  
It is recommended that you memorize your security codes. If  
you need to make a note of your security codes, never write  
them in a way that they can be recognized by another person. If  
you forget them contact your dealer for the Phone Lock Code or  
your Service Provider for PIN and PIN2.  
Phone Lock  
With the Phone Lock enabled you will be restricted to answer  
incoming calls and make emergency calls only. The Phone  
Lock Code is set to “0000” at the factory.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Security”  
2 F B twice to enable Phone Lock  
3 Enter the 4-digit code press B  
Phone Lock  
The phone will be locked and the lock icon (O)  
Enabled  
will appear in the display  
Pana  
Unlocking the Phone  
To restore normal operation, enter your Lock Code and press B  
The lock icon will disappear from the display. However, once  
you turn the phone off and on again you will be asked to enter  
the Lock Code again.  
Disabling Phone Lock  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Security”  
2 F B and e to point to “Phone Lock”  
3 F f until “Disable” appears in the option area of the  
display  
4 F B  
5 Enter the Lock Code and press B  
 
16  
Phone Security  
PIN  
The PIN (Personal Identification Number) protects your SIM  
card against unauthorized use. If you enable the PIN, every  
time the phone is turned on you will be asked to enter the PIN.  
Once this has been correctly entered you will be able to use the  
phone. As with the Phone Lock you can change the PIN at any  
time.  
PIN2 controls security for the Fixed Dial Store and Call Charge  
metering.  
Enabling/Disabling the PIN  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Security”  
2 F B and e to point to “PIN”  
3 F B to enable/disable the PIN  
4 F PIN number B  
Changing Security Codes  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Security”  
2 F B and e to point to “Phone Lock” or “PIN”  
3 F f until “Change” appears in the  
Phone Lock  
option area of the display  
Call Bar  
PIN  
4 F B enter the current code  
Change  
3
5 F B enter the new code  
6 F B verify the new code  
7 F B  
 
17  
Advanced Operation  
Advanced Operation  
DTMF Tones  
DTMF tones can be sent during conversation. These are often  
used to access voice mail, paging and computerized home  
banking. For example, you may need to input a number to  
remotely access voice mail messages.  
Send DTMF Tones During a Call  
F digits (0 to 9, # and *)  
Pause Dial  
Using pauses allows you to send DTMF tones automatically.  
1 F phone number  
2 F 0 and hold until a “P”  
appears  
+01234P6  
3 F DTMF digits after the  
Menu  
pause e.g. Enter the number  
to access voice mail  
messages.  
4 F D  
When the call is successful DTMF tones will be sent every 3  
seconds or when D is pressed.  
Alert Profile  
Alert Profile enables you to identify up to five callers with a  
particular ring tone making it easier to distinguish between  
callers.  
Creating an Alert Profile  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Phonebook”  
2 F B and e to point to “Alert Profile”  
3 F B when “Select” is displayed  
4 F B when “Insert” is displayed  
 
18  
Advanced Operation  
5 F enter the phone number or recall from the Phonebook  
– see “Retrieving a Number” page 23  
6 F B  
7 F and use e to select the ring tone  
+0123456  
that you wish to use for incoming calls from  
this phone number  
Type  
2
4
Insert  
8 F B  
Call Hold and Call Waiting  
Holding/Resuming a Call  
1 F B when “Hold” is displayed in the option area  
2 F B when “Resume” is displayed in the option area  
Making a Second Call  
1 F phone number, or recall from Phonebook – see  
“Retrieving a Number” page 23  
2 F D  
The first call will be placed on hold.  
Receiving a Second Call  
A second call can be received, if call waiting is switched on –  
see “Call Service” page 36. It is not possible to have more than  
one fax or data call. All voice calls must be ended before you  
can make or receive a fax or data call.  
Accept a Second Call  
F B when “Accept” is displayed in the  
option area  
The current call will be placed on hold.  
Reject a Second Call  
1 F f to display “Reject” in the option area  
2 F B  
End Current Call and Receive Second Call  
1 F E with a waiting call  
2 F any key except E or g  
 
19  
Advanced Operation  
Operation During Two Calls  
Swapping Between Calls  
00:34  
F B when “Swap” is  
Held call  
Home  
displayed in the option area  
Voice Call  
Current  
call  
End Current Call  
2
Swap  
1 F f to display “End” in  
the option area  
2 F B  
The held call will remain held.  
End Both Calls  
F E  
Call Transfer  
With two calls connected, Call Transfer enables you to connect  
them together ending your connection, leaving them to talk  
together without you.  
When you have two calls:  
1 F f to display “Trans.” in the option area  
2 F B  
The two calls will be connected to each other and your call will  
be ended.  
NOTE: Two call transfer cannot be utilized while in Multi-party  
mode.  
Multi-party Calls  
A Multi-party call enables three to five people to be in  
conversation at the same time. It is possible to swap between a  
Multi-party call and another call in the same way as with two  
separate calls.  
Enabling Multi-party  
With two calls connected (one active, one on hold)  
1 F f to display “Merge” in the option area  
2 F B  
A Multi-party call has been enabled, all three people will be able  
to talk to each other.  
 
20  
Advanced Operation  
Adding to Multi-party  
You can add to the Multi-party call (up to a maximum of five).  
Either by making a call or accepting an incoming call. The call  
can then be merged into the Multi-party.  
NOTE: When making a call or accepting an incoming call the  
Multi-party call will be placed on hold. The callers in the Multi-party  
call can continue to communicate with each other while on hold.  
Splitting a Multi-party  
You can select an individual from the Multi-party and remove  
their connection. This enables you to talk privately without the  
participation of the rest of the Multi-party.  
During a Multi-party call:  
1 F f to display “Option” in the option area  
2 F B  
3 F e to select a caller in the Multi-party  
4 F f to display “Split” in the option area  
5 F B  
The selected caller will be split from the Multi-party call and the  
Multi-party call will be placed on hold (the remaining Multi-party  
call callers can still communicate).  
Ending Multi-party Calls  
You can either select an individual in the Multi-party and end  
the call or end the entire Multi-party call.  
Ending a Single Connection  
During a Multi-party call  
1 F f to display “Option” in the option area  
2 F e to select a caller in the Multi-party  
3 F f to display “End” in the option area  
4 F B  
Ending a Multi-party Call  
During a Multi-party call:  
F E to end all the calls at once  
 
21  
Phonebook Basics  
Phonebook Basics  
Phone numbers can be stored in two locations. You can store  
numbers in the SIM Phonebook (therefore the number of  
locations, length of name and number of phone numbers are  
SIM dependant). Alternatively you can store phone numbers in  
the Mobile Phonebook, this means that if you change the SIM  
the numbers in the phone are not lost.  
Storing a Number  
1 F phone number  
2 F A  
3 F e select the Phonebook (either SIM or  
Mobile)  
4 F B  
5 The phone number you entered will be  
displayed, edit the number if necessary  
6 F B to enter the phone number  
7 F enter the name – see “Alpha Entry” page  
32  
8 F B  
9 F location number  
10F B  
Automatic Location  
Location:  
The phone number can be stored automatically  
at the first available location. This can be done  
(1-50)  
-
instead of entering a location number.  
Any  
0-9  
F B when “Any” is displayed in the  
option area of the display  
Overwrite Protection  
If a location is occupied you will be asked if you  
wish to overwrite the current information.  
Overwrite?  
Home  
(18)  
F B to overwrite the selected location  
Ok  
F C to choose another location  
number  
 
22  
Phonebook Basics  
Browsing Phonebooks by Name or  
Location  
You can search the phonebook by either Name or Location.  
The default setting for browsing is “Names”. All Phonebook  
entries will be listed in alphabetical order of both SIM and  
Mobile Phonebook merged. When browsing by name pressing  
a lettered key will take you to the first entry starting with that  
letter.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Phonebook”  
2 F B and e to point to “Browse”  
3 F f to toggle between “Names” and “Loc’ns”  
4 F B  
5 F e to select the Phonebook you wish  
All Phonebook  
to browse  
SIM Phonebook  
MobilePhonebook  
6 F B  
Select  
1
Retrieving a Number  
1 When in standby:  
2 F A  
3 F e to browse through the Phonebook  
NOTE: The Phonebook you last viewed will be the default when you  
next press A. To change the default, use the Phonebook menu to  
select a particular phonebook.  
Once you have selected a phone number or name, there are a  
number of actions that you can perform. You can dial the  
selected number by pressing D.  
 
23  
Phonebook Basics  
Editing Phonebook Entries  
You can View, Recall, Edit, Delete or Create in the Phonebook.  
To access these features you follow the same procedure. With  
a phone number or name displayed:  
1 F f and scroll between “View”, “Recall”, “Edit”,  
“Delete” or “Create”  
2 F B to select an option  
View  
Displays an individual phone number and name or names list.  
Recall  
Displays the phone number, enabling you to either change it or  
call the number.  
Edit  
Displays the phone number, allowing you to make changes,  
followed by the name, enabling you to make changes.  
Delete  
Deletes the entry from the Phonebook.  
Create  
Enables you to create a new entry in the Phonebook.  
Speed Dial a Stored Number  
1 F location number – leading zeros may be left out  
2 F #  
3 F D  
Hot Key Phone Numbers  
It is possible to dial phone numbers from the Phonebook or  
Service Dial part of Phonebook very quickly. Some Hot Key  
Phone numbers may be reserved by the Service Provider, for  
example the first three Hot Key Phone numbers may be linked  
to the Service Dial part of the Phonebook - see page 27. To  
select a source for the Hot Key phone numbers see  
“Phonebook” – page 33.  
1 F 1 to 9 and hold  
2 F D  
 
24  
Advanced Phonebook  
Advanced Phonebook  
Note Pad  
During a call you can enter numbers which you may wish to dial  
when the call has ended.  
During a call:  
1 F phone number  
2 When the call has ended press D to call that number  
To store in Phonebook, press A while the number is displayed  
– see “Storing a Number” page 22.  
Recent Numbers  
Recently dialled phone numbers will be stored in “Last Dialled”.  
If Caller Identification is available the caller’s phone number for  
an answered call will be stored in “Answered” and an  
unanswered call will be stored in “Unanswered”.  
When the store is full the next phone number will overwrite the  
oldest.  
1 F D  
2 F e to point at “Last Dialled”, “Answered”  
or “Unanswered”  
3 F B  
4 F e to point at the phone number (or  
name) you wish to dial  
5 To store in Phonebook, press A while the  
number is displayed – see “Storing a Number”  
page 22.  
6 F D  
You can edit or delete the phone number before dialling – see  
“Editing Phonebook Entries” page 24.  
Calling the Last Dialled Number  
To redial your last called phone number F D D  
 
25  
Advanced Phonebook  
Returning an Unanswered Call  
When the display shows that you have received calls but not  
answered them.  
1 F B  
2 The last caller’s phone number will be displayed if it is  
available  
3 F e to point at the phone number you wish to dial  
4 F D  
Fixed Dial  
The Fixed Dial Store is part of Phonebook, but with additional  
security. When the security feature Fixed Dial is switched on it  
is only possible to make calls with phone numbers that are in  
the Fixed Dial Store.  
When Fixed Dial is switched on any manually dialled phone  
numbers must match a phone number in the Fixed Dial Store.  
To store, edit or delete a phone number in the Fixed Dial Store  
“Fixed Dial” must be switched on – see “Security” page 38. With  
Fixed Dial switched on, all phone numbers can be added,  
edited or deleted as normal, but you will be asked for PIN2 –  
see “Phone Security” page 16.  
“Wild” Numbers  
Wild numbers are spaces that can be stored in  
a phone number. The “wild” numbers must be  
filled before the phone number is dialled. In  
this way a call can be restricted to a specific  
area by storing the area code of a phone and  
when recalled the remainder can be added.  
The “wild” numbers can be anywhere within a  
stored phone number.  
+0123_45_  
Menu  
1 F 0 and hold until “_” appears to enter a wild number  
2 When the phone number is recalled pressing a numeric key  
will fill in a “wild” number.  
 
26  
Advanced Phonebook  
Service Dial  
Your Service Provider may program some special phone  
numbers into your SIM. It is not possible to modify the Service  
Dial numbers.  
1 F A and hold  
2 F g to browse through the Service Dial list of phone  
numbers  
The phone number pointed to can only be recalled or dialled.  
 
27  
Short Text Messages  
Short Text Messages  
You can receive, display, edit and/or send short text messages,  
of up to 160 characters to mobile phones on the same network  
or any network that has a roaming agreement.  
Setting your Phone for Short Text Messages  
Before you can send a message you must enter the Message  
Centre number into Parameters (your Service Provider will  
supply the Message Centre number).  
NOTE: The Message Centre number may have been  
preprogrammed, on your SIM card  
Setting the Message Centre Number  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Messages”  
2 F B and e to point to “Parameters”  
3 F B and e to point to “Message Centre”  
4 F B  
5 F 0 and hold until a “+” appears  
6 F country code or e to scroll through the abbreviated  
international names – see “International Dialling” page 9  
7 F message centre number (including area code)  
8 F B  
NOTE: If you do not include the international access code, you will  
not be able to send or receive Short Text Messages.  
 
28  
Short Text Messages  
Sending a Short Text Message  
You have the option to either create your own message or use  
a pre-defined message.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Messages”  
2 F B and e to point to “Create”  
3 F B and e to select “<Create>” or a pre-defined  
message  
4 F B enter the message (up to 160 characters) – see  
“Alpha Entry” page 32.  
5 F B  
Hello  
_
You will be asked if you wish to send the  
message, if you do not wish to send the  
message press C, the message will be  
stored.  
ABC  
Ok  
6 F B, enter the destination phone number (or recall a  
number from the Phonebook) - see “Retrieving a Number”  
page 23  
7 F B twice  
8 You maybe asked if you wish to have delivery confirmation,  
if you want confirmation press B.  
9 If you do not, use f to indicate “No”, then press B  
Using Pre-Defined Messages  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Messages”  
2 F B and e to point to “Create”  
3 F B and e to point to the pre-defined message you  
wish to use  
4 F B twice to send the message  
 
29  
Short Text Messages  
Changing the Pre-Defined Message Language  
With the pre-defined message highlighted:  
1 Use f to select “Lang”  
2 F B and e to select a language  
3 F B and f to point to “Select”  
4 F B twice to send the message  
Receiving Short Text Messages  
When a Short Text Message is sent to your  
phone the message indicator (N) will flash in  
Received  
New  
Message  
the display, with an audible tone or vibration  
alert. This indicates that a new message has  
been received.  
1
Read  
If the message indicator appears constantly in the display this  
indicates that the message area is full and you will need to  
delete old messages in order to be able to receive new  
messages in the future.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Messages”  
2 F B and e to point to “Receive List”  
3 F B and e to scroll to the message  
4 F B to read the message  
5 To delete the message use f to select “Delete”  
6 F B twice  
Reading a Short Text Message  
To read the message press B when “Read” is displayed  
in the option area.  
 
30  
Short Text Messages  
Cell Broadcasts  
Cell broadcasts are general information that is sent to your  
phone by a network operator. The information can be district  
traffic or weather.  
Selecting Broadcast Topics  
You need to specify the topic(s) of information that you wish to  
receive as broadcasts before you can receive them.  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Messages”  
2 F B and e to point to “Broadcasts”  
3 F B and e to point to “Topics”  
4 F B  
5 F B and e to select a Topic  
6 F B twice to insert the Topic into your broadcast list  
Enabling/Disabling Broadcasts  
When “Menu” is displayed in the option area of the display:  
1 F B and e to point to “Messages”  
2 F B and e to point to “Broadcasts”  
3 F B and e to point to “Receive”  
4 F B  
Once broadcasts have been enabled, the same procedure will  
disable broadcasts.  
 
31  
Alpha Entry  
Alpha Entry  
Alpha Entry is used to enter alphanumeric characters into  
Phonebook, Short Text Messages, Price Per Unit and the  
Greeting Message.  
Key  
Character entry type  
Normal  
(U)  
Greek  
(V)  
Extended  
(W)  
1
2
3
4
5
6
7
8
9
Space“@,.;:!¡?¿()[]{}’&%+-/\^~|<>=_£$¥¤§  
ABCabc  
DEFdef  
GHIghi  
JKLjkl  
ABG  
AÄÅÆBCÇaäåæàbc  
DEÉFdeéèf  
GHIghiì  
DEZ  
HQI  
KLM  
NXO  
JKLjkl  
MNOmno  
MNÑOÖØmnñoöøò  
PQRSpqrsß  
TUÜVtuüùv  
WXYZwxyz  
PQRSpqrs PRS  
TUVtuv TUF  
WXYZwxyz CYW  
Each time a key is pressed in quick succession it will display the  
next character available on that key (or if the key is pressed and  
held down it will cycle through the available characters).  
Releasing the key, or pressing another key will enter the  
currently displayed character and the cursor will move to the  
next position.  
To access the different character types, normal (U), numerals  
(X), Greek characters (V) and extended characters (W)  
press A.  
Editing Alpha Entry  
Pressing e will move you up or down one line. Pressing f  
will move you left or right one character. When the cursor is  
moved over a character and another key pressed this will insert  
the new character. Pressing C will delete the character to the  
left of the cursor or delete the current line when pressed and  
held.  
 
32  
Menu Structures  
Menu Structures  
When the word “Menu” is in the option area of the display  
pressing the B will display a menu of phone features. To select  
a feature press e so that the pointer is showing next to the  
feature that you require then press B.  
A quick way of selecting a feature is to press the menu number  
shown in the bottom left of the display.  
To leave the menu press C repeatedly.  
During a call a restricted menu will be available.  
NOTE: Any feature that does not appear with it’s corresponding  
menu structure has already been detailed earlier in this manual.  
Key Guard  
For instructions on “Key Guard” – see page 12.  
Phonebook  
Phonebook  
B
Browse  
Create  
Alert Profile  
Review  
My Numbers  
Service Dial  
Hot Key Dial  
Most common use of the Phonebook is covered in “Phonebook  
Basics” – see page 22.  
Review shows how many locations are available in the  
Phonebook. Occupied locations are shown with “w“.  
My Numbers is a convenient part of Phonebook where your  
voice, fax and data phone number(s) can be stored and viewed.  
The source for the Hot Key phone numbers can be set using  
the Hot Key Dial menu.  
 
33  
Menu Structures  
Messages  
Messages  
B
Auto Delete  
Lifetime  
Message Centre  
Report  
Receive List  
Send List  
Create  
Protocol  
Review  
Parameters  
Broadcasts  
B
B
Receive  
Message List  
Topics  
Languages  
Most common use of the Messages is covered in “Short Text  
Messages” – see page 28  
Received messages will be stored in the Receive List. Flashing  
“•” will indicate unread messages. Once the message is  
selected, you can read, delete, edit and reply. With the word  
“Sender:” displayed or a phone number in quotation marks (“ ”),  
pressing D dials the phone number or pressing A stores the  
phone number in the Phonebook.  
When a message has been sent or edited it will be stored in the  
Send List. Review allows you to check usage of the message  
area.  
Parameters  
The Parameters are necessary for receiving or sending  
message.  
Auto Delete will erase messages automatically. When  
“Received Read” is selected, a new message will overwrite the  
oldest read message. When “Received Any” is selected, a new  
message will overwrite the oldest message even though it may  
not have been read.  
Lifetime is the duration that your message is stored at the  
Message Centre. Delivery attempts will be repeated until the  
message has been delivered or the Lifetime expires.  
When your message has been delivered a confirmation can be  
received if Report is set to “Yes”.  
The Message Centre may be able to convert the message to  
the format specified by Protocol.  
 
34  
Menu Structures  
Broadcasts  
The Message List will display the last received broadcast  
messages.  
The Language in which broadcast messages are displayed can  
be changed.  
Applications  
Applications  
B
Clock Set  
Clock Format  
Clock Function  
Alarm Set  
B
Power On Time  
Power Off Time  
For instructions on “Phone Clock” - see page 13.  
Personalise  
Personalise  
All Tones  
Ring Volume  
B
Ring Type  
Voice Calls  
Fax Calls  
Data Calls  
Messages  
B
Key Volume  
Warning Tone  
Language  
Tones  
B
B
B
Display Setting  
In Vehicle  
DTMF Length  
Defaults  
Greeting  
Backlight  
Contrast  
Animation  
Keep Alive  
Auto Answer  
The Language that the phone will use for display messages can  
be changed.  
In Tones, the phone key, ring and warning tones (except low  
battery warning), can be switched off. When All Tones are  
switched off the silent indicator ([) is displayed.  
A different Ring Type can be used for voice, fax, data and  
messages. There is a selection of 6tones and 14 melodies.  
Display Setting allows the colour and the contrast of the display  
to be changed.  
A personalised Greeting can be programmed for when the  
phone is switched on – see “Alpha Entry” page 32.  
 
35  
Menu Structures  
Animation allows the animated themes to be changed or  
disabled.  
When the phone is mounted in the optional Car Mount Kit and  
the vehicle ignition is turned off the In Vehicle - Keep Alive timer  
will start, delaying the switching off of the phone. If the ignition  
is turned off during a call, the call will be maintained; when the  
call ends the timer will continue, or the phone will be switched  
off if the timer has expired. If the delay timer expires during a  
call, the call will still be maintained. If the phone is removed  
from the Car Mount Kit during the specified delay time, the timer  
will be canceled and the phone will not be turned off.  
When Auto Answer is switched on, and the phone is mounted in  
the optional Car Mount Kit or Personal Handsfree Adaptor, a  
call will be answered without pressing any keys.  
The duration of DTMF tones that are played during pause dial  
can be changed from short and long in DTMF Length.  
Defaults will return your Personal Settings to their factory  
default, except the Phone Lock code and language.  
Call Service  
Call Service  
B
Last Call  
All Calls  
Cost Left  
Price/Unit  
Max Cost  
Call Waiting  
,
Caller  
s
ID  
Warning at  
Withhold ID  
Call Charge  
B
Last Call will display the duration and call charge, if available, of  
the last call during standby or the current call during a call.  
Times are indicated as: hours (0-99), minutes (0-59), seconds  
(0-59) - HH:MM:SS.  
All Calls displays the accumulated duration and call charge, if  
available, of incoming and outgoing calls. The lock code or  
PIN2 is required to reset the timer and call charge.  
Call Waiting allows you to receive a second call during your  
current call. When updating or checking the status of call  
waiting the phone must be registered with a network.  
 
36  
Menu Structures  
Caller’s ID allows you to check the status of Caller’s  
Identification. The phone must be registered with a network.  
Using Withhold ID it is possible to check if you send Caller’s  
Identification information when you make a call. When checking  
the Status of Withhold ID the phone must be registered with a  
network.  
Call Charge will set the cost of each unit for call charge  
information and the required currency in which call charge is  
displayed.  
Using Max Cost can restrict use of the phone to a specified  
number of units.  
NOTE: The duration of one unit may vary during the day, peak and  
off-peak times. Therefore, the call charge can be calculated  
accordingly. However, call charge information may not give an  
accurate reflection of the tariffs charged by your Service Provider.  
Call Divert  
Call Divert  
B
Voice Calls  
Fax Calls  
Data Calls  
Cancel All  
Status  
When Call Divert is enabled the divert icon (t) is displayed.  
You can divert voice, fax and data calls using different  
circumstances and to different phone numbers.  
When updating or checking the Status of Call Divert the phone  
must be registered with a network.  
 
37  
Menu Structures  
Security  
Security  
B
Phone Lock  
Call Bar  
PIN  
Bar Voice  
Bar Fax  
B
Bar Data  
Cancel All  
Status  
PIN2  
Fixed Dial  
Barred Dial  
Password  
Most common uses of Security are detailed in “Phone Security”  
- see page 16  
Call Bar is used to restrict certain outgoing and/or incoming  
calls. Call Bar is controlled by a security Password that is  
supplied by your Service Provider. When updating or checking  
the Status of Call Bar the phone must be registered with a  
network. Different Call Bar restrictions can be used for voice,  
fax and data calls. Any combination of call restrictions can be  
set.  
With Fixed Dial switched on you can only make calls with the  
phone numbers stored in Fixed Dial area of the Phonebook –  
see “Fixed Dial” page 26. Emergency calls can be made at any  
time. To use this function PIN2 is required.  
Barred Dial enables you to bar all phone numbers from being  
dialled on the phone. To use this function PIN2 is required.  
Network  
Network  
B
New Network  
Search Mode  
Network List  
When not in your home country you may use a network that you  
do not directly subscribe to, this is called ROAMING. National  
Law may not permit roaming in your home country.  
New Network is used to manually select a network that is  
available in your current location.  
 
38  
Menu Structures  
When the Search Mode is set to “Automatic” the phone will  
automatically reselect a new network in order to maintain  
optimum network availability. While the Search Mode is set to  
“Manual” the phone will only use a selected network. If  
coverage is lost another network should be selected.  
The Network List is used when the Search Mode has been set  
to “Automatic”. The location numbers in the Preferred Network  
List show the search priority.  
Selecting “Insert” stores a new network in the currently  
displayed location and then moves other networks down, “Edit”  
overwrites the old network with a new one, and “Add” stores a  
new network at the end of the list.  
 
39  
Care and Maintenance  
Care and Maintenance  
Pressing any of the keys may produce a loud tone. Avoid  
holding the phone close to the ear while pressing the  
keys.  
Extreme temperatures may have a temporary effect on  
the operation of your phone. This is normal and does not  
indicate a fault.  
Do not disassemble the equipment. There are no  
user-serviceable parts.  
Do not subject the equipment to excessive vibration or  
shock.  
Avoid contact with liquids. If the equipment becomes wet  
immediately remove the power and contact your dealer.  
Do not leave the equipment in direct sunlight or a humid,  
dusty or hot area.  
Keep metallic items that may accidentally touch the  
terminals away from the equipment.  
Always charge the Battery Pack in a well ventilated area,  
not in direct sunlight, between +5°C and +35°C. It is not  
possible to recharge the battery pack if it is outside this  
temperature range.  
Avoid recharging battery packs for longer than  
recommended.  
Do not incinerate or dispose of the battery packs as  
ordinary rubbish. The battery packs must be disposed of  
in accordance with local legislation and may be recycled.  
When disposing of any packing materials or old  
equipment check with your local authorities for information  
on recycling.  
 
40  
Glossary of Terms  
Glossary of Terms  
Dual Tone Multi-Frequency tones allow you to  
communicate with computerized phone  
systems, voice mailboxes etc.  
DTMF Tones  
Global System for Mobile Communications.  
The name given to the advanced digital  
technology that your phone uses.  
GSM  
The country where your home network  
operates.  
Home country  
Home network  
The GSM network on which your subscription  
details are held.  
Network  
Operator  
The organization responsible for operating a  
GSM network.  
Used for the control of the Call Bar. Supplied  
by your Service Provider.  
Password  
PIN  
Personal Identification Number used for SIM  
security. Supplied by your Service Provider. If  
the PIN is entered incorrectly 3 times, the PIN  
will be blocked.  
Personal Identification Number used for the  
control of Fixed Dial Store and Call Charge  
metering. Supplied by your Service Provider.  
If the PIN2 is entered incorrectly 3 times, the  
PIN2 will be blocked.  
PIN2  
PIN/PIN2 Unblocking Key. Used to unblock  
the PIN/PIN2. Supplied by your Service  
Provider. If the PUK/PUK2 is entered  
incorrectly 10 times, the PUK/PUK2 will be  
blocked.  
PUK/ PUK2  
 
41  
Glossary of Terms  
The act of locking on to a GSM network. This  
is usually performed automatically by your  
phone.  
Registration  
The ability to use your phone on networks  
other than your Home network.  
Roaming  
Service  
Provider  
The organization responsible for providing  
access to the GSM network.  
Subscriber Identity Module. A small  
smart-card which stores unique subscriber  
and user-entered information such as  
Phonebook and Short Messages. Supplied by  
your Service Provider.  
SIM  
 
42  
Trouble Shooting  
Trouble Shooting  
Should any problem persist contact your dealer.  
Problem  
Cause  
Remedy  
Check that the Battery  
Pack is fully charged  
and correctly connected  
to the phone.  
Telephone  
will not switch  
on.  
Extremely  
The network you are  
short battery  
using and the condition  
life for a new of the battery pack can  
battery pack. affect battery life.  
Short battery  
The battery pack was  
life for an old  
worn out.  
Replace with a new  
one.  
battery pack.  
To maintain maximum  
performance always  
use until the Low  
Battery Warning and  
then fully recharge the  
battery pack.  
To revive the Battery  
Pack use the phone  
until the Low Battery  
Warning and then fully  
recharge, repeat this  
process at least three  
times. However, if the  
battery life is still short,  
the Battery Pack has  
eventually worn out.  
Replace with a new  
one.  
The life of the battery  
Short battery pack is affected by  
life for Ni-MH improper charging, this  
battery pack. is inherent in all Ni-MH  
batteries.  
 
43  
Trouble Shooting  
When the Battery Pack  
The phone  
cannot be  
switched on  
when  
has been deeply  
discharged the phone  
will take a short time to  
detect which type of  
Battery Pack it is  
charging  
Leave the phone  
charging the Battery  
Pack for a few minutes  
before attempting to  
switch it on.  
charging  
Unlock the phone  
(Menu: Security: Phone  
Lock)  
The phone is locked.  
Disable the outgoing  
call barring, or barred  
dial (Menu: Security:  
Call Bar/Barred Dial)  
Outgoing calls are  
barred.  
Calls cannot  
be made.  
Move to a coverage  
area and operate your  
phone after it has  
registered with a  
network.  
The phone is not  
registered to a network.  
Check your SIM  
supports Fixed Dial.  
Calls cannot  
be made from  
Fixed Dial  
Store  
Check if the Fixed Dial  
is switched on (Menu:  
Security: Fixed Dial).  
Check the phone  
number is stored in the  
Fixed Dial.  
The phone is not  
switched on.  
Switch the phone on.  
Disable the incoming  
call barring (Menu:  
Security: Call Bar)  
Incoming calls are  
barred.  
Calls cannot  
be received.  
Move to a coverage  
area and operate your  
phone after it has  
registered with a  
network.  
The phone is not  
registered to a network.  
 
44  
Trouble Shooting  
Check that the antenna  
symbol S is displayed.  
Move to a coverage  
area and operate your  
phone when the  
Emergency  
calls cannot  
be made.  
You are not in a GSM  
coverage area.  
antenna symbol is  
displayed.  
Unlock the phone  
(Menu: Security: Phone  
Lock)  
The phone is locked.  
Telephone  
numbers  
cannot be  
recalled.  
Switch off Fixed Dial  
(Menu: Security: Fixed  
Dial)  
Fixed Dial is switched  
on.  
 
45  
Important Error Messages  
Important Error Messages  
Area not  
Roaming in the selected area is not allowed.  
Allowed  
Network not  
Allowed  
Roaming with the selected network is not  
allowed.  
The network has detected authentication failure  
because your SIM is not registered with that  
network. Contact your Service Provider.  
Security  
Failure  
The SIM is blocked because the wrong PUK has  
SIM Blocked been entered ten times. Contact your Service  
Provider.  
The phone has detected a problem with the SIM.  
Switch the phone off and then back on. If the  
message does not disappear contact your  
SIM Error  
Service Provider.  
A message has been received but the message  
Message  
Rejected  
Store Full  
store is full. To receive messages, delete some  
of the currently stored messages or set  
messages to automatically clear (Menu:  
Messages: Parameters: Auto Delete)  
The PIN2 is blocked permanently because the  
wrong PUK2 has been entered 10 times.  
Services controlled by PIN2 cannot be used.  
Contact your Service Provider.  
PIN2  
Invalidated  
Warning  
Store Full  
Continue?  
The message area is full. Your messages cannot  
be stored until some of the currently stored  
messages are deleted.  
Auto Redial  
List Full  
Redial list of unsuccessfully dialled numbers is  
full. Switch the phone off and then on again.  
 
46  
Specifications  
Specifications  
Telephone  
GSM900 Class 4  
GSM1800 Class 1  
Type  
Temperature range  
Charging  
Storage  
+5°C to +35°C  
-20°C to +60°C  
Battery – Attached to phone  
Battery Pack (S)  
Battery Pack (L)  
Weight  
130g  
170g  
Dimensions  
Height x Width x  
Depth  
135 x 45 x 20.5mm  
135 x 45 x 30mm  
3.6V DC, 670mAh  
Ni-MH  
3.6V DC, 1340mAh  
Ni-MH  
Supply Voltage  
Standby time (h)  
Talk Time (h)  
Up to 95  
3
Up to 190  
6
Charge Time (min)  
100  
150  
NOTE: Charge time will be longer when the phone is turned on.  
Battery life is affected by the network you are using and the  
condition of the battery pack.  
 
47  
Notes  
Notes  
 
48  
Notes  
 
49  
Notes  
 
50  
The Serial Number can be found on the outside of the phone  
under the battery. For your convenience we recommend that you  
note the following details as a record of your purchase.  
Part Number  
Serial Number  
Dealer Name  
Purchase Date  
BULL CP8 PATENT  
© Matsushita Communication Industrial UK Limited 1999  
Information in this document is subject to change without notice. No  
part of these instructions may be reproduced or transmitted in any  
form or by any means without obtaining express permission from  
Matsushita Communication Industrial UK Limited  
 
7LB270A  
Printed in UK  
991004  
 

Miele Cooktop 06 707 900 User Manual
MTD Snow Blower 190 768 User Manual
MTD Snow Blower 769 03247 User Manual
Multiquip Trash Compactor MVH 402DSB User Manual
NetComm Network Router NP740N User Manual
NETGEAR Marine GPS System GS116Ev2 User Manual
Network Technologies Network Card ST NXM U HD User Manual
Oki Printer ML591 User Manual
Panasonic Telephone KX T2395D W User Manual
Panasonic Webcam DMC SZ9 User Manual