Panasonic Camera Accessories HHR380A User Manual

NICKEL METAL HYDRIDE BATTERIES: INDIVIDUAL DATA SHEET  
Typical Charge Characteristics  
HHR380A  
Cylindrical L-A size (HR 17/67)  
2.0  
1.9  
1.8  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
1.0  
0.9  
0.8  
Dimensions (with Tube)  
(mm)  
Charge: 2000mA- V=10mV  
17.0+-0  
0.7  
(
+)  
0˚C  
20˚C  
45˚C  
0
20  
40  
60  
80  
100  
120  
140  
160  
Charge Time (minutes)  
67.0+-0  
1.5  
Typical Discharge Characteristics  
1.8  
Charge: 2000mA dT/dt=1.0˚C/min,20˚C  
Disharge Temperature: 20˚C  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
1.0  
0.9  
0.8  
(
)
Specifications  
760mA(0.2 It)  
mm  
17.0+0/-0.7  
67.0+0/-1.5  
Grams  
inch  
0
1
2
3
4
5
6
0.67+0/-0.03  
2.64+0/-0.06  
Ounces  
Diameter  
Height  
Discharge Time (hours)  
Approximate  
Weight  
53  
1.87  
1.8  
Nominal Voltage  
1.2V  
Charge: 2000mA,dT/dt=1.0˚C/min.20˚C  
Disharge Temperature: 20˚C  
1.7  
1.6  
1.5  
1.4  
1.3  
1.2  
1.1  
1.0  
0.9  
0.8  
Average**  
3800 mAh  
3700 mAh  
Discharge  
Capacity*  
Rated (Min.)  
Approx. Internal impedance  
at 1000Hz at charged state.  
25m  
Standard  
370mA (0.1It) x 16hrs.  
2000mA dT/dt  
Charge  
Rapid***  
F
˚
C
˚
Standard  
Charge  
2000mA(0.53 It)  
3800mA(1 It)  
0˚C to 45˚C  
0˚C to 40˚C  
32˚F to 113˚F  
32˚F to 104˚F  
14˚F to 149˚F  
-4˚F to 95˚F  
-4˚F to 113˚F  
-4˚F to 131˚F  
Rapid  
Discharge  
< 1 year  
0
10 20 30 40 50 60 70 80 90 100 110 120  
Discharge Time (minutes)  
-10˚C to 65˚C  
-20˚C to 35˚C  
-20˚C to 45˚C  
-20˚C to 55˚C  
Storage  
< 3 months  
< 1 month  
* After charging at 0.1It for 16 hours, discharging at 0.2It.  
** For reference only.  
*** For rapid charge: use dT/dt charge termination method. Refer to the  
Nickel Metal Hydride “Charge Methods” section for further details.  
Battery performance and cycle life are strongly affected by how they  
are used. In order to maximize battery safety, please consult Panasonic  
when determining charge / discharge specs, warning label contents  
and unit design.  
Note: [It] was previously expressed as [C]. [It] is an IEC standard expression  
for the amount of charge or discharge current and is expressed as:  
It(A) = Cn (Ah)/1h.  
• [It] is the reference test current in ampres  
• [Cn] is the rated capacity of the cell or battery in Ampere-hours.  
n = the time base [hours] for which the rated capacity is declared  
AUGUST 2005  
NICKEL METAL HYDRIDE HANDBOOK  
modification without notice. Contact Panasonic for the latest information.  
This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to  
 

Mr Coffee Coffeemaker TF4 User Manual
Multiquip Portable Generator MQP20P User Manual
Multi Tech Systems Modem MTCBA C EN NX User Manual
Murphy Automobile Parts RP75 User Manual
Nortel Networks Network Card 703t User Manual
Omega Computer Drive USB 4750 User Manual
Optima Company Projector X316 User Manual
Panasonic Printer KX MB271 User Manual
Panasonic Telephone KX TG2583B User Manual
ParaBody Fitness Equipment 837101 User Manual