Panasonic Blood Pressure Monitor EW BU35 User Manual

Operating instructions  
Instrucciones de Uso  
Upper Arm Blood Pressure Monitor  
Monitor de presión arterial en brazo  
Model No./ N de Modelo EW-BU35  
º
English  
Español  
1
1
S
Before operating this device, please read these instructions completely and save this manual for  
future use.  
Antes de utilizar este dispositivo, lea completamente estas instrucciones y conserve este manual  
para futura referencia.  
 
BEFORE USE  
Table of contents  
BEFORE USE  
Introduction ....................................................................... 3  
Basics of Blood Pressure.................................................... 3  
Important Instructions Before Use................................... 3  
Precautions to Ensure Safe, Reliable Operation.............. 5  
Easily Check Your Blood Pressure Readings  
Against the JNC 7* Classification ....... 6  
Parts identification ............................................................ 7  
Display ................................................................................ 9  
Inserting batteries ............................................................. 10  
When using the main unit with the AC adapter .............. 10  
Setting the time and date ................................................. 11  
Wrapping the cuff .............................................................. 12  
HOW TO USE  
Getting into the measurement position .......................... 13  
Taking a reading (Measuring/Recording measurements) ....... 14  
About each indicators ....................................................... 15  
Recalling readings from memory ..................................... 17  
Deleting all data stored in memory.................................. 17  
Comparing with old measurements................................. 18  
Monthly average (All) ..............................................................................18  
Weekly average (All, AM, PM)................................................................18  
Comparing with old measurements (continued) ............ 19  
All data (All, AM, PM) ...............................................................................19  
Storage ............................................................................... 20  
APPENDIX  
Care and maintenance....................................................... 21  
Specifications..................................................................... 21  
Explanation of rating plate symbols ................................ 22  
Q&A..................................................................................... 23  
Troubleshooting ................................................................ 24  
FCC STATEMENT ................................................................. 26  
2
 
BEFORE USE  
Introduction  
Thank you for purchasing the Panasonic Automatic Arm Blood Pressure Monitor EW-BU35.  
Measuring your own blood pressure is an important way of monitoring your health. High  
blood pressure (hypertension) is a major health problem which can be treated effectively  
once detected. Measuring your blood pressure between doctor visits on a regular basis  
in the comfort of your home, and keeping a record of the measurements, will help you  
monitor any significant changes in your blood pressure. Keeping an accurate record of  
your blood pressure will help your doctor diagnose and possibly prevent any health  
problems in the future.  
Basics of Blood Pressure  
Your heart acts like a pump, sending blood surging through your blood vessels each  
time it contracts. Blood pressure is the pressure exerted by blood pumped from the  
heart on the walls of blood vessels. Systolic pressure is the pressure exerted when the  
heart contracts and pumps blood into the arteries. Diastolic pressure is the pressure  
exerted when the heart expands, or relaxes. When you or your doctor take your blood  
pressure, both your systolic and diastolic pressures are measured. If your blood pressure  
measurement is 120 mmHg over 80 mmHg (120/80), for example, your systolic pressure  
is 120 mmHg while your diastolic pressure is 80 mmHg.  
Important Instructions Before Use  
1. Do not confuse self-monitoring with self-diagnosis. Blood pressure measurements  
should only be interpreted by a health care professional who is familiar with your  
medical history.  
2. If you are taking medication, consult with your physician to determine the most  
appropriate time to measure your blood pressure. NEVER change a prescribed  
medication without first consulting with your physician.  
3. Blood pressure can vary based on many factors, including age, gender, weight and  
physical condition. In general, a person’s blood pressure is lower during sleep and  
higher when he or she is active. Blood pressure can change easily in response to  
physiological changes. The setting in which a person’s blood pressure is measured  
can also affect the results.  
Having one’s blood pressure measured by a healthcare professional in a hospital  
or clinic can cause nervousness and may result in a temporarily elevated reading.  
Because blood pressure measurements taken in a clinical setting can vary  
considerably from those taken at home, a person’s blood pressure should be  
measured not only occasionally in the doctor’s office, but also on a regular basis at  
home. Also, if you find that your blood pressure is lower at home, this is not unusual.  
To accurately compare with your physician’s reading, take your Panasonic blood  
pressure monitor to your doctor’s office and compare readings in this setting.  
4. People suffering from cardiac arrhythmia, vascular constriction, liver disorders or  
diabetes, people with cardiac pacemakers or a weak pulse, and women who are  
pregnant should consult their physician before measuring their blood pressure  
themselves. Different values may be obtained due to their condition.  
3
 
BEFORE USE  
5. Try to take your blood pressure measurements at the same time and under the same  
conditions every day.  
The ideal time to measure your blood pressure (to obtain your so-called “base  
blood pressure”) is in the morning just after waking up, before having breakfast  
and before any major activity or exercise. If this is not possible, however, try to take  
measurements at a specified time prior to breakfast, and before you have become  
active. You should relax for about 5 minutes before taking the measurement.  
The following situations may cause substantial variations in blood pressure  
readings and should therefore be avoided at least 30 minutes prior to taking your  
blood pressure.  
Blood pressure will be higher than usual:  
- when you are excited or tense  
- when you are taking a bath  
- during exercising or soon after exercising  
- when it is cold  
- within one hour after eating  
- after drinking coffee, tea or other beverages containing caffeine  
- after smoking tobacco  
- when your bladder is full  
- when in a moving vehicle  
Blood pressure will be lower than usual:  
- after taking a bath  
- after drinking alcohol  
6. Measurements may be impaired if this unit is used near a television, microwave  
oven, X-ray equipment or other devices with strong electrical fields. To prevent  
such interference, use the unit at a sufficient distance from such devices or turn the  
devices off.  
7. This unit is designed for use by adults. Consult with your physician before using this  
unit on a child. Do not use on neonatal, infants and children.  
8. This unit is not suitable for continuous monitoring during medical emergencies or  
operations.  
9. Do not use the unit for any purpose other than measuring blood pressure. Do not  
use the unit together with other devices.  
10. Improper handling of batteries may result in battery rupture or in corrosion from  
battery leakage. Please observe the following to ensure proper use of batteries.  
a. Be sure to turn off the power after use.  
b. Do not mix different types or sizes of batteries.  
c. Change all batteries at the same time. Do not mix old and new batteries.  
d. Be sure to insert batteries with correct polarity, as instructed.  
e. Remove batteries when they are worn out, dispose of them properly according to  
all applicable environmental regulations.  
f. Do not disassemble batteries or throw them into a fire.  
g. Do not short-circuit batteries.  
h. Do not attempt to recharge the batteries included with the unit.  
11. Caution: Use only accessories that are recommended for your model. Substitution  
may result in measurement error.  
4
 
BEFORE USE  
Precautions to Ensure Safe, Reliable Operation  
1. Do not drop the unit. Protect it from sudden jars or shocks.  
2. Do not insert foreign objects into any openings.  
3. Do not attempt to disassemble the unit.  
4. If the unit has been stored at temperatures below 32 °F (0 °C), leave it in a warm  
place for about 15 minutes before using it. Otherwise, the cuff may not inflate  
properly.  
5. Do not store the unit in direct sunlight, high humidity or dust.  
6. When cleaning, unplug the AC adapter from the AC outlet before cleaning. Also, do  
not plug in or unplug the AC adapter with wet hands.  
Doing so may result in electric shock or fire.  
7. Do not spill water on the main unit or AC adapter. Doing so may cause electric shock,  
short-circuiting, or product damage.  
8. Do not use the AC adapter if it is damaged or if it plugs into the AC outlet loosely.  
Doing so may result in electric shock, overheating or short-circuiting.  
9. If the product does not operate properly or seems strange, stop use and unplug the  
AC adapter immediately, and request inspection and service. Failure to do so could  
result in the risk of an accident, electric shock, or fire.  
10. When using the AC adapter, make sure it is fully inserted into the AC outlet. Failure to  
do so could result in electric shock, overheating or short-circuiting.  
11. When the product is not in use, unplug the AC adapter from the AC outlet.  
12. When unplugging the AC adapter, do not pull on the cord. Always grasp the AC  
adapter body and unplug it. Failure to do so could result in the risk of electric shock,  
short-circuiting, or fire.  
13. Do not insert any object in the AC adapter or allow debris to collect on it. Doing so  
could result in the risk of electric shock, short-circuiting, or fire.  
14. Do not scratch, damage, modify, forcibly bend, pull, or twist the AC adapter cord.  
In addition, do not place heavy objects on top of the cord or pinch it with objects.  
Do not wrap the cord around the main unit and the AC adapter. Doing any of these  
things may result in the risk of fire or electric shock.  
15. Do not step on the AC adapter. Doing so may cause an accident or injury.  
16. Do not use a voltage converter. Doing so may cause fire or electric shock.  
17. This AC adapter EW-2B02 is designed for use only with Panasonic Blood Pressure  
Monitor, model EW-BU35. Use with other electrical devices may result in death or  
serious personal injury.  
18. ALWAYS unplug the AC adapter from the power outlet before performing  
maintenance.  
19. Do not let this product to be used by children.  
20. Do not let this product to be used by people who cannot express their feelings,  
or who cannot operate the product by themselves. Do not use the unit on an arm  
where a catheter has been inserted. Such use may result in an accident or injury.  
21. Use AC adapter only with electrical outlet of voltages marked on name plate. For use  
in the U.S.A., use AC adapter only with AC 120 V electrical outlet. Use with electrical  
outlets at other voltages may result in the risk of fire, electric shock, or burns.  
22. Do not allow any material to drape over the AC adapter. Doing so could result in the  
risk of fire.  
23. Do not modify or attempt to repair the product or AC adapter by yourself.  
Doing so could result in the risk of fire, electric shock, or personal injury.  
5
 
BEFORE USE  
Easily Check Your Blood Pressure Readings Against the JNC 7* Classification  
Blood Pressure Categories  
(mmHg)  
Stage 2 Hypertension e.g.: SBP 165  
DBP 105  
100  
Stage 1 Hypertension e.g.: SBP 150  
DBP 95  
90  
80  
Prehypertension e.g.  
:
SBP 130  
DBP 85  
Normal e.g.: SBP 115  
DBP 75  
(mmHg)  
160  
120  
140  
Systolic Blood Pressure (SBP)  
If the two blood pressure measurements (systolic, diastolic) fall into separate categories,  
your level is classified in the higher of the two categories. For example, a Stage 2 systolic  
reading, but a diastolic pressure reading in the normal range.  
*JNC 7: The Seventh Report of the Joint National Committee on Prevention, Detection,  
Evaluation and Treatment of High Blood Pressure National Institute of Health (NIH)  
Publication; No. 03-5233, May 2003  
IMPORTANT:  
Do not be alarmed by temporarily high or low readings because fluctuations in a  
person’s blood pressure are not uncommon. If possible, measure and record your  
blood pressure at the same time every day, and consult your physician if you have  
questions or concerns.  
If abnormal variations in blood pressure are observed in measurement, please consult  
your physician.  
6
 
BEFORE USE  
Parts identification  
Main unit  
Left side  
Right side  
7
1
2
3
4
5
6
Bottom  
8
OFF/ON & START  
button  
4
5
6
Display  
Cuff socket  
1
7
8
Memory/Recall  
button  
Clock button  
Battery cover  
2
3
Graph switching  
button  
Connector  
(for AC adapter)  
7
 
BEFORE USE  
Cuff  
Guide mark  
Direction mark  
Guide Scale  
Tube  
Cuff plug  
Hook and loop fastener  
Includes  
Main unit  
Cuff  
Batteries  
AC adapter  
Pouch  
Operating instructions  
Quick guide  
Guarantee card  
Accessories  
(EW-2B02)  
AC adapter  
Pouch  
Plug  
* Specifications of the product or parts may be changed without prior notice.  
8
 
BEFORE USE  
Display  
1
2
3
4
5
6
7
8
9
10  
11  
12 13  
Battery icon  
Record mark  
Pulse  
1
6
11  
Notifies when running out of  
battery  
Displays when the measurement  
can be recorded or when the  
recorded measurement is  
displayed  
Shows the pulse  
Systolic blood  
pressure  
Average mark  
Irregular pulse detection  
12  
2
7
Displays when recalling the  
average measurements  
Displays if irregular pulse is  
detected during measurement  
Displays measured or stored  
value  
Trend graph  
Pulse indicator  
Movement warning  
13  
3
8
Shows the value of blood  
pressure in graphs.  
Displays pulse rhythm  
Detects irregular arm  
movements  
9
Diastolic blood  
pressure  
4
AM mark/PM mark  
Displays when recalling the  
measurements of AM or PM  
Displays measured or stored  
value  
Date/Time/Memory  
number  
Month/Week mark  
10  
5
Displays separately when the  
trend graph is on a monthly/  
weekly basis  
9
 
BEFORE USE  
Inserting batteries  
*
*
Always use alkaline batteries. (4 AA-size LR6 alkaline batteries)  
When replacing batteries, always use 4 fresh alkaline batteries of the same type from  
the same manufacturer, and replace them simultaneously.  
*
If the product will not be used for a long time, remove the batteries.  
Turn the main unit over and remove the  
1.  
battery cover by sliding it in the direction  
1
2
of the arrow while pressing lightly on  
.
3
Check the polarity of the batteries and  
install them correctly, as shown.  
2.  
3.  
Replace the battery cover and slide it closed.  
CAUTION :  
Replace batteries when :  
Always follow the cautions printed on the batteries.  
Check the polarity of the batteries and install  
them correctly.  
The “low battery”  
indicator is displayed.  
No display appears even  
Remove worn out batteries promptly.  
If the product will not be used for a long time,  
remove the batteries.  
Batteries should be used before their expiration date.  
Use after the expiration date may result in injury or  
staining of the surrounding area due to generation  
of heat, bursting, or leakage.  
if  
is pressed.  
Concerning Batteries :  
Batteries last for approx. 500 times, which is 3 times/day for 5 months (when using Panasonic alkaline  
batteries AA cell LR6). (Under the condition that the room temperature is 73°F (23°C), 170mmHg pressured,  
and the length of upper arm is 11-3/4" (30cm). )  
If batteries other than alkaline batteries are used or batteries are used in a cold room, or measuring a person  
with high blood pressure, battery life may be dramatically shorter.  
*Use alkaline batteries. (Panasonic Oxyride batteries can also be used.)  
Be sure to replace batteries once a year to prevent battery leakage.  
When using the main unit with the AC adapter  
Be sure to use only the exclusive AC adapter (EW-2B02).  
Insert the AC adapter plug into the  
1.  
2.  
connector on the side of the main unit.  
2
Plug the AC adapter fully into the AC outlet.  
1
Caution when using only the AC adapter  
When no batteries are installed in the main unit and the AC adapter is unplugged from the AC outlet  
or main unit, the set date and time will be reset and deleted. (Stored data will be retained.) Because of  
this, even when using the AC adapter, it is recommended that batteries be installed in the main unit.  
10  
 
BEFORE USE  
Setting the time and date  
*
*
Set the date and time before selecting the OFF/ON & START button.  
Be sure to set the date and time before taking the first measurement after purchasing  
the blood pressure monitor or after changing the batteries.  
During setting, if no button is pressed for 5 minutes or more, the clock will be  
displayed as "-:--", and the power will be off without saving any settings. It is also  
possible to perform measurement and recording even under this circumstance.  
However, the record will not include any time information.  
*
Adjust the flashing numbers  
sequently  
Adjust numbers  
Complete setting  
Hold  
longer).  
"year (2011)" will flash.  
(for 3 seconds or  
1.  
Hold  
"year"  
Adjust the "year".  
2.  
(1) Press  
number.  
(2) Press  
setting.  
Setting range for years is from 2011 to  
2050.  
to set the desired  
to complete the  
Adjust the "month" --> " date" --> "hour"  
--> "minutes" by repeating procedures in  
step 2.  
3.  
4.  
"month"  
mm/dd  
Press  
to complete the  
settings.  
This setting cannot be completed by  
pressing  
before adjusting  
the "hour" and "month". Be sure to press  
after adjusting the "hour"  
"date"  
"hour"  
"minutes"  
and "month" to complete settings.  
The set time will disappear after 5 seconds.  
*
To reset, perform the procedures in  
step 1. to 4.  
11  
 
BEFORE USE  
Wrapping the cuff  
The cuff can be used on either upper arm. This section shows an example of wrapping  
the cuff on the left arm.  
*
The difference in blood pressure between left and right arm may be around 10  
mmHg. Be sure to always use the same arm. It is recommended to use the arm with  
the higher blood pressure.  
Cuff socket  
Insert the cuff plug into the cuff socket all the way in.  
1.  
Align the tube  
pointing toward  
the middle finger.  
Fit the cuff to the upper arm.  
2.  
Fit the preformed cuff onto the upper arm  
with the direction mark at the inner side.  
Wrap the cuff on bare skin.  
Wrap the cuff.  
3.  
Align the tube pointing toward the middle  
finger.  
Approx. 1 inch  
(2 to 3cm)  
Align the rotating part of the tube to the  
line extended from the middle finger.  
Set apart 1 inch (2 to 3cm) from the elbow  
joint.  
Wrap the cuff with a gap of 1 or 2 fingers.  
Be careful that the cuff is not too tight.  
Press the hook and loop fastener down  
well to fasten the cuff.  
hook and loop fastener  
Points when wrapping  
The cuff can be used on either upper arm.  
<Example for wrapping on the right arm.>  
Be sure to always wrap on the same  
position by using the guide.  
(if your weight / arm circumference  
did not change  
significantly.)  
2
3
12  
 
HOW TO USE  
Getting into the measurement position  
Sit quietly and relax while taking measurements.  
Take a measurement while sitting at a desk and positioning the cuff at heart level  
as shown in the image below.  
*
Differences in height will cause differences in measured blood pressure values.  
Place the elbow on the table or on  
something similar.  
1.  
Align the height of the cuff to the heart.  
2.  
Relax with your palm facing up.  
3.  
Use the same upper arm with the same posture at the same time every day.  
We recommend three measurements a day.  
First···  
Upon Waking (Because, with almost no influence from body  
movements, the blood pressure is closest to that at night.)  
Second···  
Third···  
Before Lunch (Because, with no influence from the meal, it provides  
blood pressure values close to the highest of the day.)  
At Bedtime (So as to obtain data close to your average blood pressure  
values during the day.)  
This way, by taking measurements morning, noon and night, you can use the unit to  
learn the patterns of and monitor your blood pressure.  
In the following situations, measurements might be abnormally influenced.  
Within 1 hour after eating or drinking alcohol  
Immediately after drinking coffee or tea, or smoking  
In a moving vehicle  
Immediately after exercising or taking a bath (Wait at least 20 minutes and take a  
measurement while staying quiet.)  
In cold places (Take measurements at room temperatures around 68 °F (20 °C).)  
When you need to urinate (Wait several minutes after urinating before taking  
measurements.)  
Be sure to comply with the following points for accurate measurements. Not  
following these points may make it impossible to obtain meaningful measurements:  
Do not move your body, arm, or fingertips.  
Do not touch the main unit or the cuff during measurement.  
Do not talk.  
Do not use devices emitting strong signals, such as cellular phones, near the main  
unit. The measurement may not be performed correctly due to the signal and this  
may lead to malfunctions.  
13  
 
HOW TO USE  
Taking a reading (Measuring/Recording measurements)  
Please start taking a reading under the condition that the power is off.  
Start  
Press  
.
1.  
After the entire display has been lit, the cuff  
will be pressurized and measurement will be  
taken automatically.  
The pressure value and the time will be  
displayed.  
The  
mark will flash and the unit will  
beep with the pulse, detected during  
pressurization.  
After the measurement is completed, the unit  
will beep, and the blood pressure value and  
pulse rate will be displayed.  
Finish  
* It will beep 4 times.  
"
"
and the graph " " are blinking.  
For how to see the graph, refer to page 16.  
According to the measurement result,  
safety/warning indicators may be  
displayed. For details, refer to page 15, 16.  
Memory  
To store the measured values.  
2.  
3.  
press  
.
"
"
will go from flashing to being  
steadily lit.  
The memory number, measurement date,  
and time are alternately displayed.  
If you do not press  
, the unit  
will shut down automatically after approx.  
5 minutes.  
To complete the measurement, press  
.
This unit can store a maximum of 270 measurement values.  
When exceeding 270 stored measurements, stored data will be overwritten,  
beginning with the oldest data.  
14  
 
HOW TO USE  
About each indicators  
To perform a correct measurement, this unit provides a movement detection  
function and an irregular pulse warning function. When the indicators appear, the  
correct measurement might not have been obtained. If any indicator appears, it is  
recommended to repeat the measurement. Stay calm and relax for four to five minutes,  
before perfoming a new measurement.  
*
The "  
value.  
" and "  
" indicator will be recorded together with the measurement  
Movement detection function  
The movement detection function is to indicate, with  
, extra pressure on the cuff caused by movements  
of the arm during the measurement. When movement is  
detected and the measurement is completed, the indicator  
is displayed after flashing for approx. 6 seconds.  
If the movements exceed acceptable levels, no reliable  
measurement can be performed and the error message "U  
12" will be displayed.  
Irregular pulse warning function  
If the pulse rate varies by more than 25 % from the  
average while a measurement is being taken,  
will  
be displayed when the measurement is completed. The  
indicator is displayed after flashing for approx. 6 seconds.  
If the  
indicator is displayed an irregular pulse rate is detected, which is not  
necessarily caused by arrhythmia.  
Don’t try to interpret readings or attempt to treat any condition yourself. Always  
follow the guidance of a health professional.  
However if this indicator continues to display, consult your physician.  
Advice:  
In general, blood pressure measurements are lower for the second measurement  
because you are less nervous and are more tranquil. For people who easily get tense,  
measuring twice each time is very effective. It is recommended to store all values  
when performing two measurements or more. When taking two measurements,  
always stay quiet for 4 to 5 minutes after the first measurement before taking the  
second measurement.  
15  
 
HOW TO USE  
Reading the blood pressure display  
If the measured values fall within the hypertension range, the reading displayed on  
screen flashes on and off to alert user.  
According to JNC 7 Classification, values consistently in excess of 140 mmHg (Sys.) and/  
or 90 mmHg (Dia.) are considered to constitute high blood pressure.  
Blood pressure readings will flash for  
(mmHg)  
Diastolic  
approx. 5 seconds when in the high  
blood pressure range.  
Hypertension  
(Stage 1, Stage 2)  
90  
Prehypertension  
80  
Normal  
(mmHg)  
Systolic  
120 140  
The range of high blood pressure is as  
follows:  
Systolic blood pressure: 140 mmHg  
and over  
Diastolic blood pressure: 90 mmHg  
and over  
Blood pressure is not a fixed parameter!  
The blood pressure fluctuations of this  
example of a day profile show why a single  
value is not suitable for diagnosis and  
therapy.  
For people with high blood pressure a  
fluctuation of up to 50mmHg within the  
course of a day can occur.  
SYS  
DIA  
Waking up  
Going to sleep  
16  
 
HOW TO USE  
Recalling readings from memory  
When the unit is turned off, saved readings can be recalled.  
Press  
.
1.  
The latest record will be displayed.  
"Latest"  
To display previous data, press  
again.  
2.  
"Previous"  
New data will be displayed every time  
when pressing  
.
"Second  
to last"  
To complete the measurement,  
3.  
press  
.
The power will be switched off automatically  
after approx. 30 seconds even though  
without pressing  
.
Deleting all data stored in memory  
All of the stored measurements can be deleted. The data cannot be deleted individually.  
1. Recall stored data using  
.
2. Press  
again and hold it (for approx. 3 seconds) until all readings are  
deleted.  
If everything has been deleted, "000" will be displayed.  
17  
 
HOW TO USE  
Comparing with old measurements  
The data can be recalled after recording or when the power is off.  
*
*
Correct comparison cannot be done if the date/time is set incorrectly.  
Comparison cannot be displayed without data.  
1.The displayed graph can be switched.  
2.Confirm the previous data.  
The blinking point moves  
backward with every press of the  
button.  
The measurement of the blinking  
point is also displayed.  
Monthly (All)  
Average  
Weekly  
(All)  
(All)  
A.M  
A.M  
P.M  
P.M  
(
(
)
(
(
)
Average  
All Data  
)
)
Monthly average (All)  
The average measurement from 1 to 4  
months ago, 6 months ago, 9 months ago,  
and 12 months ago (displayed as  
" " ) can be compared with the latest one  
(displayed as " ").  
The blinking point moves backward with  
every press of  
.
Comparison cannot be displayed without  
data.  
Weekly average (All, AM, PM)  
*This display shows the case of "AM".  
The average measurement from 1 to 4  
weeks ago, 6 weeks ago, 9 weeks ago, and  
12 weeks ago (displayed as " " ) can be  
compared with the latest one (displayed  
as " ").  
The measurement can be switched  
between All, AM and PM.  
The blinking point moves backward with  
every press of  
.
Comparison cannot be displayed without  
data.  
18  
 
HOW TO USE  
Comparing with old measurements (continued)  
All data (All, AM, PM)  
*This display shows the case of "PM".  
The recorded measurement (displayed  
as " ") can be compared with the latest  
one (displayed as " ").  
The measurement can be switched  
between All, AM and PM.  
The blinking graph moves backward  
with every press of  
(Maximum 270)  
.
The latest measurement is always  
displayed at the right side of the graph.  
AM (3:00 AM to 11:00 AM)  
How to read the graphs  
PM (6:00 PM to 2:59 AM)  
Whether the systolic and diastolic blood pressure values are in the high blood  
pressure region or normal blood pressure region is judged based on the JNC 7  
Trend Graph (Upper: Systolic blood pressure)  
180mmHg and over  
Hypertension (severe)  
Orange 160mmHg to 179mmHg Hypertension (moderate)  
140mmHg to 159mmHg Hypertension (mild)  
Yellow 120mmHg to 139mmHg Borderline  
Green  
less than 120mmHg  
Normal blood pressure  
Trend Graph (Lower: Diastolic blood pressure)  
100mmHg and over  
Orange  
Hypertension (severe, moderate)  
Hypertension (mild)  
Borderline  
90mmHg to 99mmHg  
Yellow 80mmHg to 89mmHg  
Green  
less than 80mmHg  
Normal blood pressure  
19  
 
HOW TO USE  
Storage  
Unplug the AC adapter from the AC outlet.  
Unplug the plug from the main unit.  
1.  
2.  
1
2
Close the hook and loop fastener of the  
cuff.  
3.  
4.  
5.  
1
2
3
Fold the spare cuff material inside the cuff.  
1
7
Place the tube into the cuff.  
Do not wrap the tube around the main  
unit. It may get damaged by excessive  
force on the tube.  
8
Be careful not to bend the tube.  
Place the main unit and the cuff into the  
accessory pouch.  
To prevent from unexpectedly operations  
during delivery, do not put the cuff or the  
accessories on the main unit.  
6.  
8
20  
 
APPENDIX  
Care and maintenance  
Do not apply excessive force to the instrument or drop the instrument.  
- Doing so may cause damage.  
Measurements may be affected if the device is used close to televisions, microwave  
oven, X-ray equipment or other devices with strong electrical elds. Measure blood  
pressure at a sufcient distance from such devices or switch them off.  
If the instrument is stored at temperatures below the freezing point, do not use it  
immediately. Leave it in a warm place for at least an hour before use.  
- If the instrument is not allowed to warm up, it may not pressurize.  
Do not insert dust or foreign objects into the instrument.  
- Doing so may result in damage.  
If the instrument becomes dirty, clean it with a soft cloth moistened with warm water  
or soapy water. Do not use alcohol, benzene, or paint thinner.  
- Use of such chemicals may result in cracking or discoloration.  
For storage, avoid high temperatures, high humidity, and direct sunlight.  
- Storage under such conditions may result in damage.  
The cuff cannot be washed.  
Specifications  
Power source  
DC 6 V (4 AA/LR6 size alkaline batteries)  
AC 120 V 60 Hz (when using AC adapter)  
Display  
Digital LCD  
Method of measurement  
Measurement range  
Oscillometric system  
Pressure: 0 mmHg to 280 mmHg  
Pulse rate: 30 to 160 beats per minute  
Accuracy  
Pressure: Within 3 mmHg  
Pulse rate: Within 5 %  
Operation temperature/humidity range  
Storage temperature/humidity range  
Measurable arm circumference  
Weight  
50 °F to 104 °F (10 °C to 40 °C), 30 % to 85 % RH  
–4 °F to 140 °F (–20 °C to 60 °C), 10 % to 95 % RH  
Approx. 7-3/4" to 15" (20 cm to 38 cm)  
Approx. 10.9 oz. (310 g) (not including batteries)  
3" × 5" × 4-1/2" (7.9 cm × 13.0 cm × 11.5 cm)  
Internally powered equipment, Type BF applied part  
Dimensions  
Protection against  
electric shock  
The blood pressure monitor might not perform to specifications if stored or used outside  
the specified temperature and humidity ranges.  
AC adapter  
Input  
AC 120 V 60 Hz  
DC 6 V 500 mA  
Output  
21  
 
APPENDIX  
Explanation of rating plate symbols  
Read the operating instructions carefully before use.  
Protection against electric shock Type BF applied part (Blood pressure monitor)  
Protection against electric shock Class II equipment (AC adapter)  
AC  
DC  
22  
 
APPENDIX  
Q&A  
Q
Why are the blood pressure values measured at home different from those measured at  
the doctors office?  
A
Blood pressure varies 24 hours a day.  
In addition, it can change greatly depending on the weather, your mental state, exercise, etc. .  
In particular, there is the phenomenon of “White coat hypertensionat doctor’s offices, where  
the blood pressure measured in a doctor’s office is higher because of stress or worry.  
In addition, if the blood pressure measured at home is sometimes higher and sometimes  
lower than the blood pressure measured at the doctors office, the following can be  
considered. Please pay attention to these points when taking measurements.  
1. Is the cuff wrapped firmly?  
Make sure that the cuff is not wrapped too loosely or too tightly.  
Is the cuff wrapped around the upper arm? Make sure it is not partly covering the elbow.  
See page 8 for how to wrap the cuff correctly.  
2. Were you worried or upset during measurements?  
Before taking measurements, take 2 or 3 deep breaths and relax, so that your blood pressure  
stabilizes.  
Q
When should I measure my blood pressure?  
A
We recommend three measurements a day.  
First ..........  
Second ...  
Third .........  
Upon Waking (Because, with almost no influence from body movement, the  
blood pressure is closest to that at night.)  
Before Lunch (Because, with no influence from the meal, it provides blood  
pressure values close to the highest of the day.)  
At Bedtime (So as to obtain data close to your average blood pressure values  
during the day.)  
This way, by taking measurements morning, noon and night, you can use the unit to learn the  
patterns of and monitor your blood pressure.  
Use of the "Comparing with Old Measurement" function can aid in the detection of a  
blood pressure pattern known as “early morning surgein which blood pressure rises  
rapidly in the morning. (See page 18.)  
Q
Since the  
the proper position. But the indicated value is still higher than usual.  
The indicator is just a guide for the proper measurement method.  
If you correct your posture when the indicator is displayed but the measured value is  
indicator was displayed, I retried the measurement by setting my arm in  
A
still higher or lower than usual, retry the measurement.  
The following causes are suspected.  
Did you measure properly (in proper posture)?  
Measure as indicated on pages 12–13.  
Measured immediately after smoking.  
Measured when irritated or emotional.  
Measured in cold environments.  
For persons who have a physical constitution with less fluctuation in the pulse rate.  
If you are concerned about the results, retry the measurement after staying quiet for 4 to  
5 minutes.  
23  
 
APPENDIX  
Q&A (continued)  
Q
The  
indicator does not light when an arm is moved.  
indicator is a function to notify you that your arm is bent or to indicate extra loads  
A
The  
on the cuff.  
Therefore, it may not indicate motions (bending an arm slightly, etc.) that do not affect the cuff.  
If you are concerned about the result, retry the measurement.  
Troubleshooting  
Display  
Status before error  
Cause and solution  
The indication disappears in the  
middle of the operation. (the  
mark is displayed.)  
Batteries are exhausted. (See page 10.)  
is displayed.  
Has the unit detected movement? (See  
page 15.)  
Your arm or body moved.  
Pressurization to more than  
280 mmHg was performed. (Cuff  
pressurizes several times.)  
Were measurements taken  
according to the proper procedure and in  
the correct posture? (See page 13.)  
Pressure decreased suddenly.  
is displayed.  
Is the cuff wrapped properly?  
Is the cuff plug inserted correctly into  
the socket?  
Cuff does not inflate.  
The measurement is not possible  
though the cuff inflates.  
(See page 12.)  
Cuff pressurizes several times.  
Take it to the store where it was purchased  
for testing and repairs.  
Failure of the main unit  
is displayed.  
24  
 
APPENDIX  
Troubleshooting (continued)  
Symptom  
Possible cause  
Systolic or diastolic blood pressure value The position of the cuff is higher or lower than your  
is high or low.  
heart when measuring.  
Cuff is not wrapped correctly.  
You moved or talked during measurements. (See page  
13.)  
Value is different from that measured by  
the doctor.  
Measurement values are different with  
each measurement.  
Blood pressure varies in response to minute changes  
in your mental state, such as your reaction to a doctor’s  
presence.  
Sit quietly for 4 to 5 minutes and then take another  
measurement. (See page 22.)  
No display appears even when the OFF/  
ON & START button is pressed.  
Batteries are installed with the polarities wrong.(See  
page 10.)  
Batteries are exhausted. (See page 10.)  
The  
indicator flashes when  
readings are being taken.  
There was a significant fluctuation in pulse when readings  
were being taken. (See pages 15–16.)  
The  
indicator flashes when  
Your arm or body moved or the buttons are pressed  
during the measurement. (See page 15.)  
readings are being taken.  
The  
flashes even though I did not In some cases this will be displayed when you have tensed  
move my arm or body.  
the muscles in your hand. Relax the muscles in your hand  
and take the reading again. (See page 15.)  
Instrument is broken.  
Take it to the store where it was purchased for testing and  
repairs.  
25  
 
APPENDIX  
FCC STATEMENT  
Federal Communication Commission Interference Statement  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC Caution: To assure continued compliance, install and use in accordance with  
provided instructions. Any changes or modifications not expressly approved by  
the party responsible for compliance could void the user's authority to operate this  
equipment.  
Product Information for FCC  
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and (2)  
this device must accept any interference received, including interference that may  
cause undesired operation.  
26  
 
For questions or assistance with your blood pressure  
monitor, call us at 1-800-338-0552.  
Panasonic Corporation of North America  
One Panasonic Way 1H-1 Secaucus, NJ 07094  
1-800-338-0552 (USA only) for questions and comments  
1
W9030BU35201  
Issued date: 2011-06-14  
Printed in China  
No.1 EN, SP(アメリカ)  
© Panasonic Electric Works Co., Ltd. 2011  
Impreso en China  
 

MSi Computer Hardware MS 6380 User Manual
MTD Trimmer 599 User Manual
Murphy Switch OPLH User Manual
Nextar GPS Receiver X3 T User Manual
Nikon Microscope Magnifier Eclipse E800 User Manual
Nortel Networks Answering Machine P0908524 User Manual
Omega Speaker Systems Thermometer OS550 BB Series User Manual
Onkyo DVD Player BD SP807 User Manual
Panasonic All in One Printer DP MB350 User Manual
Panasonic Telephone KX T7720E User Manual