Panasonic Answering Machine kx t123211d User Manual

Panasonic  
Communication Systems Division  
Technical Advisory  
Updated: Nov. 16, 00  
Subject: KX-T123211D Voicemail Integration Program Guide  
Document Number: KXTA1232002  
Step 1  
Check the software version of the KX-T123211D by using PITS programming code 98, which  
shows the software version number: Y201Z940430(TM3)  
The underlined digits represent the software production date code (format YYMMDD). In this  
example, the date code is April 30, 1994 (year, month, day). For this software version, the  
software production date of the VPS must be April 30, 1994, or later. If the software production  
date of the PBX is earlier than the 4/30/94, call Panasonic Parts Center (MSC) for an  
upgrade: 1-800-833-9626.  
Step 2  
Enable PITS programming code 80 for each extension connected to the VPS.  
This parameter is used to tell the KX-T123211D which extensions are connected to the VPS.  
Ports with this parameter enabled can receive Follow-on ID and DTMF call status signaling  
(busy, answered, disconnect, etc.) if the Voice Mail integration and DTMF integration features  
are also enabled.  
Step 3  
Enable PITS programming code 81 to turn on DTMF Integration.  
On extensions with the Voice Mail port parameter enabled, the KX-T123211D can send codes  
(DTMF tones) to indicate call states; this increases VPS efficiency. Codes apply to all  
transferred calls; CO line calls only indicate disconnect (provided the T123211D is programmed  
for CPC detection and the CO sends the CPC signal). Refer to the table on page 4.6.  
Step 4  
Put all extensions connected to the VPS into one extension group using PITS program 60.  
Reserve this extension group for these extensions!  
Do not mix other extensions into this group.  
Step 5  
Enable hunting for the VPS extension group using PITS program 08.  
Step 6  
Set the hunting type for the VPS extension group to circular; use PITS program 09.  
Step 7  
At every VPS extension, temporarily connect an SLT or butt set, go off-hook and dial 7301# to  
turn on Data Line Security.  
This prevents the KX-T123211D from sending Executive Override or Call Waiting tones to  
these extensions. We recommend that all Voice Mail port extensions have this feature enabled to  
avoid interruption of recording.  
 
Delayed Ringing Assignment—To give the operator time to answer the call before the VPS  
picks up, we recommend setting the delay to three or four rings for each extension  
connected to the KX-TVS100. Use PITS programs 49 (Day Mode) and 50 (Night Mode).  
CO Mode—Set the mode for each CO to Normal. Use PITS programs 51 and 52 to set this  
parameter.  
C. If the KX-TVS100 is only answering calls not answered by user extensions:  
Flexible Ringing Assignment—For each CO line, use PITS programs 47 (Day Mode) and  
48 (Night Mode) to enable ringing on every extension (jack) that you want to have ring.  
Refer to chart above (9B) for suggested CO line assignments.  
Delayed Ringing Assignment—To give users time to answer the call before the VPS picks  
up, we recommend setting the delay to three or four rings for each extension connected to  
the KX-TVS100. Use PITS programs 49 (Day Mode) and 50 (Night Mode).  
CO Mode—Set the mode for each CO to Normal. Use PITS programs 51 and 52 to set this  
parameter.  
 

Mr Coffee Ice Tea Maker TM10 User Manual
Mr Handsfree Conference Phone Genius User Manual
MTD Yard Vacuum 243 675A User Manual
Murphy Switch DF Series User Manual
Nesco Fryer DF 1130 User Manual
Nokia Cell Phone RM 10 User Manual
Nokia Stereo System AD 54 User Manual
NordicTrack Treadmill NTTL09712 User Manual
One for All TV Video Accessories 706735 User Manual
Pasquini Espresso Company Coffee Grinder 6 S A User Manual