Oricom Baby Monitor Secure 500 User Manual

Baby Monitor  
Secure 500  
User Guide  
 
WARNINGS AND SAFETY INFORMATION 1  
Do not place the cord in a high "wear and tear" location.  
Never use a frayed or compromised cord.  
IMPORTANT  
Please read this user guide thoroughly before use.  
Never use or place your Parent or Baby units in or near  
moisture or water (e.g. near bath or pool). Immersing in  
water can cause electric shock and even death.  
Your ORICOM Baby Monitor is designed to be an aid and  
should not be used as a substitute for responsible and  
proper adult supervision of a child.  
The Baby Monitor has been designed to provide some  
added reassurance in the form of sound transmission  
for those times when you are not in the same room as  
your baby provided you always stay within hearing range  
of the baby monitor during use. Your Baby Monitor is  
not a medical device, nor a device to prevent cases of  
Sudden Infant Death Syndrome (SID'S) or "cot death",  
and you should not rely on it for your baby's wellbeing. It is  
important that you regularly check on your baby personally.  
Power requirements  
This product requires an electrical supply of 220-240 volts,  
single phase alternating current.  
CAUTION  
Use only the mains power adaptors supplied with this  
equipment. Incorrect adaptor polarity or voltage can  
seriously damage the unit and/or cause physical harm  
and even death. The adaptors may become warm during  
use, please take care when handling.  
AC Adaptor (Baby unit / Parent unit)  
!
Make sure the Baby unit, Parent unit and mains adaptor  
cables are kept out of reach of your baby and other young  
children within the house at all times, at least one metre  
away from the baby’s cot.  
Input: 100-240VAC 50-60Hz  
Output: 7.5VDC 500mA  
Never place the baby unit inside your baby’s cot, bed or  
playpen.  
If you plan to use your Baby monitor whilst travelling  
overseas, make sure that the voltage shown on the mains  
power adaptor is the same as the local mains power before  
connecting to the power supply. Do not use any voltage  
converter with the monitor.  
Never cover the Parent or baby units with clothes, towels  
or blankets or any other item.  
 
2 WARNINGS AND SAFETY INFORMATION  
• The Ni-MH batteries supplied with this product may be  
able to be recycled once they are unable to recharge  
during normal operation. Always observe your local  
Council /State regulations regarding the disposal of  
your packaging materials, exhausted batteries, and old  
equipment.  
Battery requirements  
Each parent unit requires two rechargeable Ni-MH  
batteries, size AA 1.2V 1300mAh.  
• Do not dispose of the batteries in a re, as they can  
explode.  
• Always recycle where possible. Do not use your baby  
monitor in an explosive hazard area such as where  
there is gas leaking.  
• Do not open, unscrew or temper with any of your  
baby monitor units or battery. Always carry out repairs  
through your authorised ORICOM representative or  
other duly qualied tradesperson.  
• As there is a slight chance that the product could be  
damaged by an electrical storm, it is recommended that  
users unplug from the mains supply during an electrical  
storm.  
• Released electrolyte from the battery is corrosive  
and can cause damage to the eyes or skin. It can  
be toxic and fatal if swallowed. If there is any sign of  
poisoning, immediately call emergency 000.  
Cleaning and care  
• When your Baby Monitor is not in use, it is recom-  
mended that you disconnect it from the mains supply  
and remove the batteries.  
The surface of the case can be cleaned with a dry, soft,  
lint-free cloth. Never use cleaning agents, particularly  
aggressive solvents. Apart from occasional cleaning of the  
case, no other care is necessary.  
• Observe the proper polarity, or direction, of any  
battery. Reverse insertion of the battery cell can  
result in leakage or explosion and in turn harm or  
even death.  
 
GETTING STARTED 3  
Thank you for choosing this monitor from Oricom.  
Installation and Charger  
Your Secure 500 Baby Monitor offers the best Digital  
Technology.  
For the Parent Unit  
1. Remove the battery cover  
on the back of the Parent  
Unit by pressing and  
sliding it down. Insert the  
rechargeable batteries as  
marked on the unit and  
close the cover again.  
2. Place the Parent Unit into  
the Charger Pod.  
3. Plug the mains adaptor into a mains power socket.  
INTERFERENCE  
FREE FREQUENCY  
DECT (Digital Enhanced Cordless Telecommunications) is the  
most widely used worldwide digital cordless technology, offering  
amazingly clear sound, long range and maximum voice security.  
DECT operates on the 1.8Ghz frequency which eliminates potential  
interference from other common wireless devices such as cordless  
telephones, wireless networks (Wi-Fi), Bluetooth and cordless  
computer devices.  
The red charger light on the charger pod will illuminate  
indicating that the Parent Unit is charging.  
(the light will remain on to ensure  
optimum charge is maintained).  
Pack Contents  
• Parent unit (receiver)  
WARNING  
• Baby unit (sender)  
DO NOT USE STANDARD/ALKALINE BATTERIES  
IN THE PARENT UNIT, AS THERE IS A RISK OF  
EXPLOSION AND/OR INJURY. USE ONLY Ni-MH  
RECHARGEABLE BATTERIES AS SUPPLIED.  
• Mains adaptor with charger pod  
• 2 x NiMH rechargeable batteries (type AA, 1300mAh)  
• Mains adaptor with power cord  
• Wall mounting bracket for the baby unit  
• Purple travel bag  
!
 
4 GETTING STARTED  
4. Press [  
] to turn the Parent Unit on.  
4. Press and hold [  
] key to turn on the baby unit.  
• Before rst use, or if it has been out of use for a long  
time, the Parent Unit will need to be charged for 14  
hours. During this time, the Parent Unit will operate  
from the Charger pod when switched on. Note that the  
Parent Unit cannot be used without batteries, even if it  
is placed in the charger pod.  
• The Baby Unit should be placed about 1 metre  
to 1.5 metres away from the baby's cot on a flat  
surface. Never place the Baby Unit inside the cot,  
bed or playpen. Make sure the unit, cords and mains  
adaptor are out of reach of the baby and other  
young children. Never place either Unit on antique  
or polished surfaces (as slippage or scuffing may  
occur). The unit may cause harm if it falls onto baby  
or other young children.  
For the Baby Unit  
1. In event of a power failure, your Baby Monitor can  
switch to battery power. It is therefore recommended  
that you insert non-rechargeable batteries in the  
Baby Unit.  
2. Remove the battery cover  
on the back of the Baby  
Unit by pressing and sliding  
it down. Insert 4 alkaline  
batteries of the type AA  
(not provided) as marked  
on the unit and close the  
Note:  
If you place the Parent and Baby units too close together  
you will hear a high pitched noise called "feedback", this is  
normal. The units are designed to be located in separate  
rooms.  
To prevent feedback, do not take the Parent unit into the  
nursery/baby's room.  
Do no Press Talk button when the Baby unit and Parent  
unit are positioned in the same room. Feedback will be  
generated if the talk button is pressed when the Baby unit  
and Parent unit are within 3 metres of each other.  
cover again. Do not use  
rechargeable batteries in  
the Baby Unit.  
Battery lock  
Child tamper proof lock for  
the battery compartment.  
3. Plug the power cord into the power input at the side of  
the Baby Unit and plug the adaptor plug into a mains  
power socket.  
 
GETTING STARTED 5  
1. Insert screws into the wall through the wall mount.  
Wall mounting the Baby Unit  
The recommended mounting screw size is diameter  
3mm and length 20mm,the diameter of the screw  
head and the screw should not be greater than  
7.55mm and 4mm respectively.  
Use the following wall mount diagram to locate and install  
the mounting pins/screws if you prefer to wall mount your  
base unit. The dimensions are shown in millimeters (mm).  
58.00  
2. Put the base unit down into wall mount directly.  
Note:  
Other wall mounting methods are not recommended and  
may damage the product.  
 
6 YOUR BABY MONITOR  
Baby unit (Sender)  
Night Light  
Press to switch Night Light on or  
off.  
Up/Register  
Increase speaker volume.  
Use to enter registration mode.  
Brightness  
Press to adjust the Night Light  
brightness (once Night Light is  
switched on). There are three levels.  
Down/Default  
Decrease speaker volume.  
Used to restore original settings.  
Page  
Press to page the Parent unit  
– useful for nding when it is  
misplaced.  
Record  
Used to record your voice to  
comfort your baby and to delete  
the recorded message.  
Play/Stop  
Press to play lullaby, press  
again to stop.  
Lullaby  
Press to select lullaby 1, 2, 3  
or Play All.  
Power on/off  
Press to switch on or off.  
Microphone  
Link light  
Green when linked to Parent  
unit. Flashes if not linked - rst  
30 seconds. Flashes when Talk  
is pressed on Parent unit. Red  
ashing if not linked longer than  
30 seconds.  
Display  
Power saving backlight  
switches off 15 seconds  
after last button push.  
 
YOUR BABY MONITOR 7  
Back of Baby unit  
Underside  
Auxiliary input socket  
Use to plug in an external  
audio source, e.g. MP3  
player so you can play  
your own choice of  
music to baby.  
Temperature sensor  
Power socket  
For connection  
to mains power.  
Battery lock  
Child tamper proof  
lock for the battery  
compartment.  
 
8 YOUR BABY MONITOR  
Parent unit  
From the Parent unit you can listen to your baby and  
operate the Baby unit by remote control.  
LED Link indicator  
Green On  
– Linked to Baby unit  
Green ashing  
– Not linked to Baby unit  
rst 30 seconds  
Red Flashing  
– Not linked to Baby unit  
– for longer than 30 seconds.  
Talk (on side of unit)  
Press to talk to your baby.  
Sensitivity / Volume level LEDs  
During use, lights indicate:  
– Sensitivity level  
Display  
Power saving backlight switches off  
15 seconds after last button push.  
– Volume level  
Torch (on side of unit)  
Press and hold to switch on.  
Press to switch off.  
Up  
Increase speaker volume.  
Scroll up through menu options.  
Select  
Press to conrm the menu option displayed.  
When lullaby is playing, press to pause or resume.  
Power on/off  
Press and hold to switch the power on or off.  
Menu  
Press to open the menu.  
Press and hold to exit the menu.  
Microphone  
Mute  
Press to switch the speaker off,  
press again to switch it back on.  
Down/Default  
Decrease speaker volume.  
Scroll down through menu options.  
Used to restore original settings.  
 
YOUR BABY MONITOR 9  
Back of Parent unit  
Charging light  
Indicates parent  
unit is charging.  
Power socket  
For connection  
to mains power.  
 
10 LCD DISPLAY OF BABY MONITOR  
Baby unit display icons  
Parent unit display icons  
Battery full (icon not  
displayed when using  
mains power).  
Displayed when the  
Night Light is on.  
Speaker is switched off.  
Sound alert is on.  
Full battery  
Night Light is on.  
Lullaby is playing.  
Displayed when a  
lullaby is being played.  
Battery half full.  
Battery low.  
Temperature is within  
normal levels.  
On when the  
Mid charge  
temperature is normal.  
Flashing when it is  
too hot or too cold for  
baby.  
Timer is on.  
Low charge  
Vibrate alert is on.  
Empty  
Scrolling bars when  
charging.  
 
BASIC OPERATION 11  
Once you have set up your Baby Monitor, you will be able  
to hear the sounds in your baby's room through the Parent  
Unit. And also see the green and red sensor lights around  
the top of the Parent Unit rise and fall with the sound levels.  
• Keep pressing the button until the 3 LEDs to the  
far right illuminate as well. The Parent unit is now  
switched on and will search for and link itself to the  
Baby unit.  
• If the connection between the Parent and Baby  
Units is broken at any time the green Link light on  
the Parent Unit will flash slowly, the parent unit will  
beep to alter you that the link has been lost and the  
green and red sensor lights will cease to react to any  
sounds. Move closer to the baby unit or follow the  
• Green LINK Light is lit while unit searches for the  
baby unit.  
• To switch Off, press [  
] key until the display goes  
blank and the link light goes off.  
directions in chapter "Troubleshooting" to re-establish Changing Baby unit from battery to  
the link.  
mains power  
Power On/Off  
To conserve battery power on the Baby unit or when  
the batteries are low or at, plug the Baby unit into the  
mains. If currently running on batteries and switched  
on, changing from battery to mains power will be instant  
and will not affect any of the settings.  
Baby Unit  
• Press [  
] key to switch on the unit.  
You can use the Parent unit to monitor baby while it is  
charging.  
• The Green Link light comes on to show that the unit  
is within range of the Parent unit.  
• To switch Off, press [  
] key until the display goes  
Monitoring  
blank and the link light goes off.  
Position the baby unit accordingly. It should be placed  
at least 1 metre away from the baby.  
Take the parent unit to monitor.  
Parent Unit  
• Press and hold [  
will illuminate.  
] key. The Link LED on the far left  
 
12 BASIC OPERATION  
Audio picked up by the baby unit microphone is depicted  
on the 7 Lights on the parent unit (4 green and 3 red).  
The more audio is picked up, the more Lights will be lit.  
When no audio is picked up, all 7 Lights will be off.  
If the volume of the Parent Unit is turned off, an alert will  
sound and the unit will vibrate if the vibrator is set to on.  
• Press [ ] or [ ] to select the desired level. For  
example, when the current sensitivity level is level 3,  
digit "3" will be displayed.  
• There are ve levels of sensitivity: level 5 represents  
the highest sensitivity, level 1 represents the lowest  
sensitivity.  
Note:  
• Press [ ] key to conrm.  
Do not position the baby unit and the parent unit close to  
each other or in the same room as a high-pitched feedback  
• Press [Menu] key to return to the standby display.  
noise may be generated. User can press [  
] key to  
] key again  
Mute  
temporarily turn off the speaker. Press [  
Mute  
Adjusting Volume  
will turn on the speaker.  
There are 5 volume levels on each Unit and an Off setting  
on the Parent Unit.  
Sensitivity  
You can adjust the sensitivity on the Parent Unit to monitor  
the sound from the Baby Unit. For example, if your baby is  
a particularly quiet sleeper, you can increase the sensitivity  
levels so that you are sure to hear if baby disturbs or  
becomes uncomfortable.  
On the Parent Unit,  
Press [ ] key to increase the volume or [ ] to decrease the  
volume. The volume level is shown on the display bars.  
On the Baby Unit,  
There are 5 different levels. Level 5 is the most sensitive  
and the microphone in the Baby unit is always on. At levels  
1-4, the microphone will be voice activated by the noise  
baby makes.  
Press [+] key to increase the volume or [–] key to  
decrease the volume.  
Note:  
You cannot switch the volume off on the Baby Unit.  
• Press [Menu] key and use [ ] or [ ] key to scroll to  
Sensitivity. Press [ ] key.  
Changing the volume setting on the Baby Unit will also  
affect the volume when you use the talk back feature or  
when playing a lullaby.  
 
BASIC OPERATION 13  
Note:  
Talk Back  
If no button is pressed, the paging tone will stop after 2 minutes.  
You can use the talk back feature to talk to your baby.  
If the Parent Unit volume is off, after paging operation, the  
Parent Unit volume will reset to the default volume setting.  
Whilst using Talk Back you will not be able to hear your  
baby until you release the [Talk] key.  
Torch  
Press and hold [TALK] key on the Parent unit to speak  
to baby.  
Press [TORCH] key on the parent unit to switch the torch  
on and off.  
"Talk" is shown on the display and the green link lights  
on both Units ash.  
Night Light  
Talk into parent unit microphone.  
Release [TALK] key to hear your baby again.  
Note:  
Do not press [TALK] key when the baby unit and the parent unit  
are in the same room as a high-pitch noise will be generated.  
The Night Light on the baby unit can be turned on or off  
from either the baby unit or the parent unit. You can set  
a comforting Night Light with a choice of three brightness  
levels.  
If the Parent Unit volume is off, the Parent Unit volume will  
reset to the default volume setting.  
Baby Unit  
Press [ ] key to turn Night Light on or off.  
Press [ ] key repeatedly to select the brightness  
settings.  
Paging  
If the Parent Unit is misplaced, you can use the page  
button on the Baby Unit to locate the Parent Unit.  
Parent Unit  
If the Night Light on the baby unit is off,  
Press [Page] key on the Baby Unit. The paging alert will  
sound.  
Press [Menu] key and use [ ] or [ ] key to scroll to  
"Night Light".  
"PAGING" is shown on the LCD display of both units.  
To stop the Page alert, press any button on the Parent  
Unit, or press [Page] key again on the Baby Unit.  
 
14 BASIC OPERATION  
Follow the "Temperature setting" on the Menu Setting  
section to set the temperature range and temperature alert.  
Press [ ] to conrm and use [ ] or [ ] key to set the  
Night Light on or off.  
Sound Alert  
Lullaby  
Sound alerts are played only on the Parent Unit. You can  
turn on/off the sound alerts through the menu.  
Your baby can be soothed to sleep by a gentle lullaby from  
the Baby Unit. Each lullaby is played repeatedly for 15  
minutes. Select one of the ve melodies or select Play All  
for a medley of all 5 lullabies for 15 minutes. The lullaby  
feature can be turned on and off from both the Baby Unit  
and the Parent Unit and is indicated on both by a musical  
note icon. The icon and the lullaby name will be shown on  
both displays when the lullaby is playing. The lullabies will  
play for 15 minutes.  
Follow "Sound Alert setting" on the Menu Setting to set the  
sound alert.  
Vibrate Alert  
Vibrate alert is only available on the Parent Unit. You can  
turn on/off the vibrate alert through the menu.  
You can also record your own lullaby or story lasting up to  
2 minutes. To play your own recorded lullaby, select Own  
from the menu list.  
Follow "Vibrate Alert" on the Menu Setting to set the sound alert.  
You can also plug in an external audio source like an MP3  
or CD player and play music or audiobooks of your own  
Temperature  
It is very important for your baby's health to ensure that choice. The auxiliary port is on the back of the Baby unit.  
they are kept at a safe temperature. This includes the  
room temperature, baby's temperature, baby clothing and  
bedding (contact your local health authority to ensure you  
Playing the Lullaby  
are aware of the current guidelines). Your Baby Monitor  
can show the current room temperature on the Baby Unit  
and the Parent Unit, and can even be set to alert you if the  
temperature falls outside of a dened range.  
Baby Unit  
Press [ ] key. The lullaby name is shown on the LCD  
display.  
 
BASIC OPERATION 15  
Press [ ] key repeatedly to select different lullabies.  
Press [ ] key to play.  
Temporarily Stopping the Lullaby Play  
You can stop the lullaby play temporarily. This operation is  
only available on the parent unit.  
Parent Unit  
Press [Menu] key and use [ ] key to scroll to "Lullaby".  
Press [ ] key to conrm. "Play?" is shown on the display.  
Press [ ] key to play the Lullaby.  
When lullaby is playing,  
Press [ ] to pause. "Paused" is displayed and the " "  
icon ashes on both units.  
Or press [ ] key to select "Select New" and press [ ] key.  
Press [ ] again will resume the lullaby play.  
If lullaby play is not resumed within 60 seconds, lullaby  
will stop automatically.  
Use [ ] or [ ] key to select "Lullaby 1-5", "Own", " Aux"  
or "Play All" and press [ ] key. The selected lullaby will  
be played.  
Record a lullaby  
Stopping the Lullaby Playing  
Record your own Lullaby or story words up to 2 minutes long.  
Baby Unit  
When a lullaby is playing,  
1. Press and hold [Rec] key on the Baby Unit. You can  
start recording after the beep. REC and the recording  
time are shown on the display.  
Press [  
] to stop playback.  
2. To end recording, release [Rec].  
To play your recorded lullaby, follow the steps for Playing  
the Lullaby and select "Own".  
Parent Unit  
When a lullaby is playing,  
Note:  
Press [Menu]. The display shows "Stop Lullaby?".  
Press [ ] to stop the lullaby.  
Recording is only available when the memory is empty  
(after it is deleted).  
If an auxiliary player is connected, you must also switch off  
the auxiliary player.  
The baby unit will stop monitoring during lullaby recording.  
 
16 BASIC OPERATION  
3 You can now use the external player.  
Delete a recorded lullaby  
Out of Range  
1. Press and hold [Rec]. After 2 seconds the display  
shows "Deleted".  
When the baby and parent units have no link with each  
other (eg. Out of range, parent unit or baby unit is not  
powered on), the green Link LED ashes. If there is no link  
for more than 30 seconds, "Not Linked" will be displayed  
on both units. The link break alert will also be emitted from  
the speaker of the Parent Unit every 30 seconds. The red  
Link LED will flash. When the units are linked, the green  
Link LED will be steadily lit.  
2. Release [Rec].  
To avoid deleting a recorded message, press [ ] on  
the Baby unit to check whether the Own prompt is  
displayed. If Own is displayed in the lullaby list, there is  
a recorded message.  
Connect to an auxiliary player  
Note:  
Plug another player into your Baby unit, to play songs or  
stories.  
Link break alert cannot be manually set on or off, but it can  
be suppressed for 4 minutes by pressing any button.  
There is only visual alert shown on the Baby Unit.  
On the Parent Unit:  
1 Press [Menu] and use [ ] or [ ] to select "Lullaby".  
2 Press [ ], "Play Lullaby?" is shown on the display.  
3 Use [ ] or [ ] to select "Select New" and press [ ].  
4 use [ ] or [ ] to select "Aux" and press [ ].  
You can now use the external player.  
Low Battery  
Baby Unit  
When the unit is running on battery power and reaches low  
battery level, the display will show Low Battery. Once the  
low battery level is reached, the baby unit should still be  
able to operate for approximately 30 minutes.  
On the Baby unit:  
1 Plug your player to the auxiliary input socket on the  
back of the Baby unit.  
2 Press the [ ] key repeatedly until you reach the AUX  
menu.  
 
BASIC OPERATION 17  
Running rechargeable batteries right down at least once a  
week will help them last as long as possible. The charge  
capacity of rechargeable batteries will reduce with time as  
they age, so reducing the performance time of the parent  
unit. Eventually they will need to be replaced.  
Parent Unit  
When the batteries on the Parent Unit reach a low level, the  
display will show Low Battery. The low battery alert tone will  
be emitted from the speaker every 60 seconds. Once the  
low battery level is reached, the parent unit should still be  
able to operate for approximately 1 hour and 30 minutes.  
The low battery alert message and alert tone will be turned  
off when fully charged batteries have been replaced.  
Restore to Default Setting  
You can return the baby and parent units to factory default  
settings.  
Charging the Battery  
1 Press [ ] to switch the unit off.  
Place the parent unit on its charge cradle to charge the  
battery. When charging, the red LED on the charger will  
light steadily. The bars in the battery icon on the Parent  
Unit will scroll. When the battery is full, the battery icon  
shows three bars and stops scrolling.  
2 Press [ ] again to switch the unit back on.  
3 While the unit is switching on, press and hold the [ ] key  
on the parent unit or the [–] key on the baby unit until  
you hear a beep. RESET is showed on the display. The  
unit will restore all the original factory settings.  
Note:  
Note:  
The Parent Unit must never be operated on the charging  
cradle without batteries.  
If [ ] or [–] is not pressed within 4 seconds, the unit  
returns to idle mode.  
If you want to restore the factory default settings on the  
baby monitor, you will need to restore factory default  
setting on the Baby Unit or on the Parent Unit individually.  
The parent unit can be used on or off the charger pod.  
When on the charger pod, the batteries will be recharged  
at the same time. However, the time it takes to charge the  
batteries to full will be longer when the unit is charged and  
used at the same time.  
Rechargeable batteries in the Parent unit give up to 12  
hours continuous usage. Please note however, that new  
batteries do not reach full capacity until they have been in  
normal use for several days.  
 
18 MENU SETTINGS  
Note:  
Start playing  
1. Press [ ] key, "Play?" is shown, press [ ] key to play  
the lullaby.  
2. To stop lullaby, press [Menu], "Stop Lullaby?" is shown  
and press [ ] to stop lullaby.  
All Menu setting operations are only available on the  
Parent unit.  
During setting, press [Menu] key to exit.  
Night Light Setting  
Selecting lullaby  
1. Press [ ] key and use [ ] or [ ] key to select "Select  
New".  
2. Press [ ] key and use [ ] or [ ] key to select "Lullaby  
1-5", "Own", " Aux" or "Play All" .  
You can turn on or off the Night Light on the baby unit via  
the parent unit.  
1. Press [Menu] key on the parent unit. The display is  
shown below:  
3. Press [ ] key. The selected lullaby will be played.  
Sound Alert Setting  
Light On?  
You can turn on/off the sound alerts on the Parent unit.  
1. Press [Menu] and use [ ] or [ ] key to select "Sound  
2. Press [ ] key to select Night light on or off.  
alert". The display is shown as the gure:  
Lullaby Setting  
You can play lullaby on the baby unit via the parent unit.  
Press [Menu] key on the parent unit and use [ ] or [ ] to  
select "Lullaby". The display is shown below:  
Sound Alert  
2. Press [ ], "Alert On?" or "Alert Off?" is shown on the  
display.  
3. Press [ ] to conrm.  
Lullaby  
 
MENU SETTINGS 19  
Press [Menu] and use [ ] or [ ] to select "Temperature",  
the display is shown below:  
Sensitivity Setting  
You can adjust the sensitivity on Parent Unit to monitor the  
sound from the Baby Unit. For example, if your baby is a  
particularly quiet sleeper, you can increase the sensitivity  
levels so that you are sure to hear if baby disturbs or  
becomes uncomfortable.  
Temperature  
1. Press [Menu] key on the parent unit and use [ ] or  
[ ] key to select "Sensitivity". The display is shown below:  
Setting Temperature Alert  
You can set the temperature alert on the Parent Unit when  
the temperature goes above or below these settings. If this  
happens, the display will show "High" or "Low" as appropriate.  
Sensitivity  
1. Press [MENU] key and use [ ] or [ ] key to scroll to  
"Temperature". Press [ ].  
2. Press [ ] key and then use [ ] or [ ] key to select the  
sensitivity level. There are 5 levels.  
3. Press [ ] key to conrm.  
2. "Alert on/off" is displayed, press [ ].  
3. Use [ ] or [ ] to select "Alert On?" or "Alert Off?".  
4. Press [ ] to conrm.  
Note:  
Temperature Setting  
If the vibrator is set to on, the Parent Unit will also vibrate  
when the temperature is too high or too low.  
Pressing any button can suppress the alert sound until  
temperature goes beyond further 2 degrees.  
You can monitor the temperature in the baby's room. The  
room temperature is constantly displayed on both Units.  
An alert will sound when the room temperature is raised or  
dropped out of the pre-set temperature range.  
Please note the baby monitor cannot manipulate the  
temperature in your baby’s room, it only provides a  
temperature reading.  
 
20 MENU SETTINGS  
Setting Temperature Range  
Timer Setting  
You can select your own minimum and maximum room  
temperatures. The minimum temperature can be anywhere  
between 10˚C and 19˚C and the maximum temperature  
anywhere between 22˚C and 30˚C. Note the default setting  
is 14˚C min. and 23˚C max.  
Set countdown timer  
The timer can be set to countdown from 1 minute to 99  
hours 59 minutes. The TIMER icon [ ] is displayed along  
with the countdown time.  
1. Press [MENU] key to scroll to "Temperature". Press [ ].  
2. Press [ ], use [ ] or [ ] key to select "Range".  
Press [Menu] key and use [ ] or [ ] key to select "Timer",  
the display is shown below:  
3. Press [ ]. Press [ ] or [ ] to change the minimum  
temperature setting.  
4. Press [ ] to conrm.  
5. Press [ ] or [ ] to change the maximum temperature  
setting.  
Timer  
6. Press [ ] to conrm.  
1. Press [ ] key, "Countdown" is shown on the display.  
Press [ ] key.  
Note:  
If the temperature goes beyond the minimum or maximum  
level, "Low" or "High" indication displays and the current  
temperature flashes in the displays of both Units. If the  
Temperature alert is set to On, an alert will be sound on  
the Parent Unit. The alert sound will go off automatically  
when the temperature falls within the pre-set range.  
2. Press [ ] or [ ]. "Set Time" is shown on the display.  
3. Press [ ], then use [ ] or [ ] key to set the hour.  
4. Press [ ], then use [ ] or [ ] key to set the minutes.  
Start or cancel countdown Timer  
1. In the Timer setting menu, press [ ].  
2. "Countdown" is shown on the display. Press [ ].  
3. "Timer On?" or "Timer Off?" is shown on the display.  
Press [ ].  
 
MENU SETTINGS 21  
3. "Timer Off?" is shown on the display, press [ ] to  
Activate count up timer  
The timer can count up from 1 second to 99 hours 59  
minutes.  
conrm.  
If countdown is currently running, the count up timer will not  
be available, and vice versa. Only one of the timers can be  
used at one time.  
The TIMER icon [ ] is displayed along with the countup  
time.  
Set clock  
1. In the Timer setting menu, Press [ ].  
2. Use [ ] or [ ] key to select "Count up". Press [ ].  
This sets the clock on both units.  
3. "Timer On?" is shown on the display, Press [ ] to  
1. Press [Menu] and use [ ] or [ ] key to select "Timer".  
Press [ ].  
conrm.  
2. Use [ ] or [ ] key to select "Clock" and press [ ].  
3. "Set Time" is shown on the display. Press [ ].  
4. Press [ ] or [ ] to set the time then press [ ] to  
Start, Stop and Reset the count up timer  
Parent Unit  
conrm.  
When count up is activated,  
5. If you set the time format to 12 hour, you should set the  
AM or FM. Press [ ] or [ ] to set AM/PM for 12 hours  
then press [ ].  
1. When it stops and displays 00:00:00, press [ ] to start,  
it will count from 00:00:00;  
2. When it is counting, press [ ] to stop. Counted time is  
displayed steadily;  
3. When it stops and displays a counted time, press  
[ ] to reset it to 00:00:00;  
4. Press [ ] again to restart it.  
Set 12 or 24 hour Format  
Time format menu is available only after Clock is activated.  
1. Press [Menu] and use [ ] or [ ] key to select "Timer".  
Press [ ].  
Cancel count up timer  
1. Press [Menu] and use [ ] or [ ] key to select "Timer".  
Press [ ].  
2. Use [ ] or [ ] key to select "Clock" and press [ ].  
3. Use [ ] or [ ] key to select "Format" and press [ ].  
4. Press [ ] or [ ] to select 12 or 24 hours and press [ ].  
2. Use [ ] or [ ] key to select "Count up". Press [ ].  
 
22 MENU SETTINGS  
Vibrate Alert Setting  
Vibrate alert is only available on the Parent Unit. You can  
turn on/off the vibrate alert through the menu.  
1. Press [Menu], and use[ ] or [ ] key to select "Vibrate".  
The display is shown below:  
Vibrate  
2. Press [ ], "Vibrate On?" or "Vibrate Off?" is shown on  
the display.  
3. Press [ ] to conrm.  
 
TROUBLESHOOTING 23  
Problem  
Possible cause(s)  
1. Check if the units are properly connected to the power  
supply.  
The red Power lights do not light on when you plug in.  
2. Check if the power is turned on. If not, Press [  
on the power.  
] to turn  
1. You may have moved out of range move closer to the  
Baby Unit and wait 5 seconds for the Link to establish.  
The green Link light on the Parent Unit is ashing and  
cannot hear the sounds from your baby's room.  
2. You may need to reestablish the Link between the two  
units. Turn both units off by pressing and holding the  
[
] and then turn on again by pressing the [  
].  
Can't hear your baby on the Parent Unit but the Link light  
is still glowing steadily.  
Check if the volume is turned up on the Parent Unit.  
Check if the rechargeable batteries are running low. Place  
the Parent Unit on the Charger Pod to recharge them.  
The Red Power light is ashing on the Parent Unit.  
A high pitched ear piercing noise can be heard from the  
units (feedback).  
Check if the Parent and Baby Units are too close together.  
Move them further apart.  
Talk back feature is not working  
Check that the volume is loud enough at the baby unit.  
 
24 PRODUCT SPECIFICATIONS  
Feature  
Specications  
Operating Frequency  
1.8 GHz  
Up to 300 m under optimum conditions. The range is  
reduced in buildings (up to 50 m) as a result of walls, doors  
etc.  
Range  
Input: 100-240 VAC 50-60 Hz  
Output: 7.5 VDC, 500 mA,  
Power supply (Baby Unit/Parent Unit)  
Non rechargeable batteries, baby unit  
(not included in the package contents)  
Type: AA, 1.5 V Alkaline  
Transmitting power  
Average: 10 mW Maximum: 250 mW  
Type: AA, 1.2 V, 1300 mAh NiMH  
Approx. 12 hours  
Re-chargeable batteries (Parent Unit)  
Operating time with charged battery  
 
GUARANTEE 25  
Warranty (Australia)  
(a) Warranty Oricom International Pty Ltd (Oricom) warrants that  
the product is free from defects in materials and workmanship  
for a period of 12 months effective from the date of purchase.  
This warranty in no way affects your statutory warranty under  
the Trade Practices Act 1974 or any other similar legislation. It  
is important that you read the Warranty Card as it contains full  
and additional details of the warranty, limitation of warranty  
and conditions for receiving the warranty services during the  
warranty period. The Warranty Card is located in the package.  
Oricom will not be liable for consequential losses including loss of  
profits arising from a cause of action in contract, tort or any other  
statutory or common law (except where a statute or any law prohibits  
this exclusion). The warranty does not extend to damage caused by  
misuse, negligence, excessive voltage or lightning. This warranty in  
no way affects your statutory rights. Full details of the warranty are  
contained in the enclosed warranty card.  
Customer Support  
If you feel this product is not working correctly please consult  
the user guide and ensure that you are using the product in  
accordance with the instructions.  
(b) Exclusion and limitation of liability. Oricom will not be in  
breach of a warranty or condition expressly stated in this User  
Guide or the Warranty Card or implied by the Trade Practices  
Act and excludes any liability arising under any statutory or  
common law for damages or any other remedy if the damage  
occurs as a result of:  
To order spare parts additional parent units, replacement parts  
and in case of any technical issues you may have with this  
product please consult our website for further information or send  
us an email for a prompt response to your enquiry.  
(i) Failure by you to follow the instructions in the User Guide  
for the installation and proper functioning of the product;  
(ii) Negligence on your part or misuse by you of the product;  
In the unlikely event of a fault developing, please contact us  
for assistance. If the product is then found to be faulty you will  
be asked to return it directly to us with a copy of the purchase  
receipt.  
(iii) Any un-controlled external cause to the product not  
functioning including but not limited to electricity failure,  
lighting, over voltage;  
(iv) Non adherence by you to the warnings in the User Guide  
and the User Guide generally; and  
(v) Modification to the product or services carried out to the  
product by anyone other than Oricom or on Oricom's  
behalf.  
 
Australia  
Oricom International Pty Ltd  
Locked Bag 658  
South Windsor, NSW 2756  
Customer Support  
Phone: 1300 889 785  
Fax: (02) 4574 8898  
 

Miele Dishwasher G 658 SCVI User Manual
Miele Microwave Oven H 136 MB User Manual
Nexstar Digital Photo Frame N3 511 User Manual
Nikon Digital Camera 26465 User Manual
Oliso Food Saver Freshkeeper 500 User Manual
Optimus Speaker 120 1751 User Manual
Palsonic CRT Television 5159G User Manual
Palsonic CRT Television 5180G User Manual
Panasonic Camera Accessories HF008 User Manual
Panasonic Camera Accessories HHR150AA User Manual