Oregon Scientific Weather Radio BAR332ES BAR332ESA BAR332ESU User Manual

Reset ................................................................................. 9  
Specifications................................................................... 9  
Precautions ...................................................................... 9  
About Oregon Scientific................................................ 10  
EU-Declaration of Conformity....................................... 10  
FCC Statement ............................................................... 10  
+ECO Solar Weather Clock  
Model: BAR332ES / BAR332ESA /  
BAR332ESU  
USER MANUAL  
CONTENTS  
Earth Friendly................................................................... 2  
Overview........................................................................... 2  
Front View ...................................................................... 2  
Top View ........................................................................ 3  
Bottom View ................................................................... 3  
Solar Panel..................................................................... 4  
Remote Sensor .............................................................. 4  
Getting Started................................................................. 4  
Solar Panel..................................................................... 4  
Backup Power ................................................................ 6  
Remote Sensor................................................................. 6  
Clock and Calendar ......................................................... 7  
Clock Reception ............................................................. 7  
Manually Set Clock......................................................... 7  
Alarm................................................................................. 8  
Temperature ..................................................................... 8  
Weather forecast.............................................................. 8  
Backlight........................................................................... 9  
 
ꢀ. SNOOZE: Activate snooze alarm / backlight  
5.  
6.  
7.  
: Clock signal reception indicator  
: Alarm time is displayed  
: Daily alarm is On  
2.  
/
: Increase / decrease value of the setting;  
activate / deactivate clock reception signal  
3.  
4.  
: Change display; set clock  
8. AM / PM  
: Toggle between outdoor temperature channels  
9. Rechargeable battery status LED indicator  
(1-3); initiate auto-toggle  
ꢀ0.  
ꢀꢀ.  
ꢀ2.  
ꢀ3.  
ꢀ4.  
ꢀ5.  
: Outdoor remote sensor battery low  
: Main unit back-up batteries low / no battery  
: AC adaptor connected  
5.  
6.  
: View alarm status; set alarm  
: Activate / deactivate alarm function  
: Rechargeable battery is low / solar panel detached  
: Rechargeable battery level indicator  
: Time zone offset  
BOTTOM viEW  
1
2
3
ꢀ6. Calendar / Clock with weekday / seconds  
TOP viEW  
1
2
3
4
5
6
ꢀ. SEARCh: Initiate sensor search  
2. RESET: Reset unit to default settings  
3. °C / °F: Select temperature unit  
 
3
SOlAR PANEl  
REMOTE SENSOR  
2
3
4
5
1
4
5
1 2 3  
ꢀ. CHARGING: charging in process  
ꢀ. LED status indicator  
2. Wall mount hole  
2. FULL: batteries fully charged (when TEST is pressed)  
3. Solar panel  
3. Battery compartment  
4. TEST establish if battery is full  
5. Battery compartment  
4. RESET: Reset unit to default settings  
5. ChANNEl switch  
GETTiNG STARTED  
SOlAR PANEl  
This product uses two AAA rechargeable batteries which  
should be charged via the solar panel. For the batteries’  
first charge, it is strongly advised to charge it for at least  
ꢀ2 hours.  
 
4
To charge the battery:  
TiP Press and hold TEST located at the back of the solar  
panel. (Green) FULL LED indicates batteries have been fully  
charged.  
ꢀ. Detach solar panel by exerting downward pressure and  
pulling at a 45° angle (approx.) away from main unit.  
4. Align holes with protruding plastic. Push solar panel  
towards main unit and snap into place.  
5-6 hours of battery charging will normally provide power to  
operate unit for 2 months.  
When the rechargeable battery is nearly flat or when solar  
panel has been detached, the (green) LED indicator on the  
main unit and  
will flash.  
TiPS  
For best results when charging the battery, place the  
solar panel directly with view to sunlight.  
Direct solar panel as follows:  
Solar panel facing:  
North  
if you reside in the:  
Southern Hemisphere  
Northern Hemisphere  
2. Insert  
2
AAA rechargeable batteries in battery  
compartment located at the back of the solar panel.  
South  
iMPORTANT Place ONLY NiMH type rechargeable  
batteries in the solar panel battery compartment. Do not  
charge non-rechargeable batteries.  
Do not scratch the solar panel’s surface or wipe it with  
strong detergent.  
Do not expose the solar panel to rain, snow or  
moisture.  
3. Expose the solar panel directly to sunlight for  
approximately 5-6 hours to charge the battery. The  
(red) CHARGING LED on solar panel will light up  
indicating there is sunlight and unit is charging.  
The duration of the rechargeable battery’s charging or  
operating time is determined by either the intensity of  
sunlight or the position of the solar panel towards the  
sun.  
Do not overcharge the batteries.  
 
5
2. Slide channel switch to select a channel (1, 2, 3).  
BACkUP POWER  
Ensure you use a different channel for each sensor.  
1 piece AAA battery  
3. Insert the battery, matching the polarities.  
4. Press RESET after each battery change.  
5. Close the battery compartment.  
In the case when the rechargeable battery is flat or nearly  
flat or when the solar panel has been detached, the AAA  
battery can act as backup power supply for the main unit.  
6. Press and hold SEARCh for 2 seconds to initiate a  
sensor search.  
ꢀ. Remove the battery compartment located at the base  
of the unit.  
NOTE Use alkaline batteries for longer usage and  
consumer grade lithium batteries in temperatures below  
freezing.  
2. Insert the battery, matching the polarity.  
3. Press RESET after each battery change.  
Power adaptor (not included)  
The remote sensor reception icon will show the following  
status:  
The adaptor powers the unit and can also be used for  
charging the rechargeable battery. When connected to the  
main unit,  
will be displayed.  
iCONS  
MEANiNG  
Main unit is searching  
NOTE The main unit and adaptor should not be exposed to  
wet conditions. No objects filled with liquid, such as vases,  
should be placed on the main unit and adaptor.  
for sensor(s)  
A sensor channel has  
been found  
REMOTE SENSOR  
No sensor found  
This product can work with up to 3 sensors at any one time  
to capture temperature readings in various locations.  
TiP Ideal placements for the sensor would be in any  
location on the exterior of the home at a height of not more  
than 1.5 m (5 ft) and which can shield it from direct sunlight  
or wet conditions for an accurate reading.  
To set up the remote sensor:  
ꢀ. Slide open the battery compartment.  
 
6
BAR332ESU: UK: MSF-60 signal: within 1500 km (932  
miles) of Anthorn, England.  
BAR332ESA: WWVB-60 signal: within 3200km (2000  
miles) of Fort Collins Colorado.  
To enable / disable clock signal reception:  
Press and hold  
reception.  
to enable or  
to disable clock signal  
NOTE Reception takes 2-10 minutes. If the signal is weak,  
it can take up to 24 hours to get a valid signal. If signal  
reception is unsuccessful, place your unit next to a window,  
press and hold  
to force another signal search.  
1.5 m (5 ft)  
Clock signal reception indicator:  
STRONG SiGNAl  
WEAk / NO SiGNAl  
ClOCk AND CAlENDAR  
MANUAlly SET ClOCk  
ClOCk RECEPTiON  
To set the clock manually, disable the clock signal reception  
first.  
This product is designed to synchronize its clock  
automatically with a clock signal.  
ꢀ. Press and hold  
.
2. Press  
3. Press  
/
to change the settings.  
BAR332ES: EU: DCF-77 signal: within 1500 km (932 miles)  
of Frankfurt, Germany.  
to confirm.  
 
7
The settings order is: time zone, ꢀ2/24 hr format, hour,  
minute, year, calendar mode (month – day / day – month),  
month, day and language.  
To activate / deactivate alarm:  
Press  
.
To silence the alarm:  
BAR332ES / BAR332ESU: Time zone offset sets the clock  
+/- 23 hours from the received clock signal time. If you have  
deactivated the clock signal reception, do not set a value  
for time zone.  
Press SNOOZE to silence it for 8 minutes  
OR  
Press any key to turn the alarm off and activate it again  
after 24 hours.  
NOTE If you enter +ꢀ in the time offset setting, this will  
give you your local time plus one hour. If you are in the US  
(BAR332ESA) set the clock to:  
To display alarm:  
Press  
PA for Pacific time  
MO for Mountain time  
.
CE for Central time  
EA for Eastern time  
TEMPERATURE  
NOTE The language options are English (E), German (D),  
French (F), Italian (I), Spanish (S) and Russian (R).  
To toggle temperature unit:  
Press °C / °F.  
To select clock display:  
Press  
to toggle between clock with seconds, clock with  
To toggle between each outdoor sensor’s readings:  
weekday and calendar.  
Press  
repeatedly  
OR  
AlARM  
Press and hold  
for 2 seconds to initiate auto toggle  
of outdoor channels.  
To set the alarm:  
ꢀ. Press and hold  
to enter alarm setting.  
to set hour / minute.  
to confirm.  
2. Press  
3. Press  
/
WEAThER FORECAST  
This product forecasts the next ꢀ2 to 24 hours of weather  
forecast within a 30-50 km (19-31 mile) radius.  
indicates alarm is ON.  
 
8
Signal frequency  
433 MHz  
UM-4 (AAA) rechargeable  
Sunny  
2
x
batteries;  
6V AC adaptor (not included)  
1 x UM-4 (AAA) battery (for backup)  
Power  
Partially cloudy  
Cloudy  
REMOTE SENSOR (ThN132N)  
96 x 50 x 22mm  
(3.78 x 1.97 x 0.87 in)  
Rainy  
L x W x H  
Weight  
62 g (2.22 ounces) without battery  
30 m (98ft) unobstructed  
Snowy  
Transmission range  
Temperature range  
Power  
-20°C to 60°C (-4°F to 140°F)  
1 x UM-3 (AA) 1.5 V battery  
BACkliGhT  
Press SNOOZE to activate backlight for 3 seconds.  
PRECAUTiONS  
Do not subject the unit to excessive force, shock, dust,  
temperature or humidity  
RESET  
Press RESET to return to the default settings.  
Do not cover the ventilation holes with any items such  
as newspapers, curtains etc.  
Do not immerse the unit in water. If you spill liquid over  
it, dry it immediately with a soft, lint-free cloth.  
SPECiFiCATiONS  
MAiN UNiT  
Do not clean the unit with abrasive or corrosive  
materials.  
TyPE  
DESCRiPTiON  
Do not tamper with the unit’s internal components. This  
invalidates the warranty.  
L x W x H  
Weight  
ꢀ58 x 87 x 55mm (6.2 x 3.4 x 2.2 in)  
280 g (9.88 oz) without battery  
Only use fresh batteries. Do not mix new and old  
batteries.  
 
9
Images shown in this manual may differ from the actual  
display.  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international.asp  
When disposing of this product, ensure it is collected  
separately for special treatment.  
EU-DEClARATiON OF CONFORMiTy  
Placement of this product on certain types of wood  
may result in damage to its finish for which Oregon  
Scientific will not be responsible. Consult the furniture  
manufacturer's care instructions for information.  
Hereby, Oregon Scientific, declares that this +ECO  
Solar Weather Clock (model: BAR332ES / BAR332ESU/  
BAR332ESA) is in compliance with the essential  
requirements and other relevant provisions of Directive  
ꢀ999/5/EC. A copy of the signed and dated Declaration of  
Conformity is available on request via our Oregon Scientific  
Customer Service.  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
Do not dispose old batteries as unsorted municipal  
waste. Collection of such waste separately for special  
treatment is necessary.  
Please note that some units are equipped with  
a
battery safety strip. Remove the strip from the battery  
compartment before first use.  
NOTE The technical specifications for this product and the  
contents of the user manual are subject to change without  
notice.  
COUNTRiES RTTE APPROvED COMPliED  
All EU countries, Switzerland Ch  
and Norway  
N
NOTE Features and accessories will not be available in all  
countries. For more information, please contact your local  
retailer.  
FCC STATEMENT  
This device complies with Part ꢀ5 of the FCC Rules.  
Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) This  
device must accept any interference received, including  
interference that may cause undesired operation.  
ABOUT OREGON SCiENTiFiC  
about Oregon Scientific products. If you’re in the US and  
would like to contact our Customer Care department directly,  
please visit:  
www2.oregonscientific.com/service/support.asp  
 
ꢀ0  
WARNiNG Changes or modifications not expressly  
approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
DEClARATiON OF CONFORMiTy  
The following information is not to be used as contact  
for support or sales. Please visit our website at www2.  
oregonscientific.com/service for all enquiries.  
NOTE This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant  
to Part ꢀ5 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference  
in a residential installation.  
We  
Name:  
Oregon Scientific, Inc.  
ꢀ986ꢀ SW 95th Ave.,Tualatin,  
Oregon 97062 USA  
Address:  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee  
that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
Telephone No.: 1-800-853-8883  
declare that the product  
Product No.:  
BAR332ES / BAR332ESU /  
BAR332ESA  
Product Name:  
Manufacturer:  
Address:  
+ECO Solar Weather Clock  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate,  
Phase ꢀ, 4ꢀ Man Yue St.,  
Hung Hom, Kowloon,  
Hong Kong  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
is in conformity with Part ꢀ5 of the FCC Rules. Operation is  
subject to the following two conditions: 1) This device may  
not cause harmful interference. 2) This device must accept  
any interference received, including interference that may  
cause undesired operation.  
Consult the dealer or an experienced radio  
technician for help.  
/
TV  
 
ꢀꢀ  
 

Miele Charcoal Grill CS 1327 User Manual
Miele Washer W 829 User Manual
Nexgrill Gas Grill 720 0001 R User Manual
Oregon Scientific Conference Phone OS200 User Manual
Palsonic TV DVD Combo 3415DVD User Manual
Panasonic Air Conditioner CW XC83YU User Manual
Panasonic Car Video System CQDF100U User Manual
Panasonic Vacuum Cleaner MC UL671 User Manual
Paradigm Speaker CE1588 User Manual
Patriot Products Chipper Electric Motors User Manual