Oregon Scientific Camcorder ATC9K User Manual

• Keep the rechargeable battery dry.  
I) Quick Start  
V) Package Contents  
• Supports Micro SD/SDHC Class 4 card or above and compatible up to 32GB  
(not included).  
• Movie storage:  
1080p = 1920x1080 pixels (16:9), 30 fps, ~12 Mbit/s data rate, approximately  
9 minutes of video per 1G Byte  
720p = 1280x720 pixels (16:9), 60 fps, ~12 Mbit/s data rate, approximately  
10 minutes of video per 1G Byte  
720p = 1280x720 pixels (16:9), 30 fps, ~8 Mbit/s data rate, approximately 15  
minutes of video per 1G Byte  
WVGA = 848x480 pixels (16:9), 60 fps, ~8Mbit/s data rate, approximately 15  
minutes of video per 1G Byte  
The recording durations will be varied which depends on the recording  
objects and environment.  
• 320 x 240 Color LCD screen  
• Focusing range 3m~infinity  
• Movie images MOV  
• USB Interface (2.0)  
• Monitor Interface HDMI (1.3)  
• Rechargeable battery (included)  
• Dimensions 40mm diameter. x 103mm length  
• Operation system WinXP/Vista /7 or Apple Mac X 10.6 or above  
• Replace only with the same type recommended by Oregon Scientific.  
• Dispose of the used rechargeable battery promptly as described in the instructions.  
• Turn the camera off before removing the rechargeable battery or the microSD  
card. The card and the data may be damaged if the microSD card is inserted  
or removed while the camera is still on.  
• Remove the rechargeable battery and the microSD card before storing the  
camera for long periods of time. Keep it in a well-ventilated place to prevent  
mould.  
• Under the following circumstances, have the camera repaired by qualified  
personnel:  
a) The plug is damaged or worn.  
b) The device has been dropped and/or the housing has been damaged.  
c) Liquid has entered the camera.  
Turning the ATC9K On  
Oregon Scientific ATC9K  
Thank you for purchasing the ATC9K Action Camera, this package should contain the:  
1. Main Camera Unit with Camera Grip  
2. Carrying Bag  
Press the On/Off Button  
.
A start up screen will be shown on the LCD.  
Recording Video Footage  
1. Aim the ATC9K at what you would like to record.  
2. To start recording press the Movie shutter button  
3. Press the movie shutter button  
a circular motion will appear, which indicates the footage is being saved.  
I . Quick Start .................................................................................... 1  
II . Camera Precautions ................................................................... 1  
III . Technical Specifications ............................................................ 2  
IV . Computer System Requirements ............................................. 3  
V . Package Contents ........................................................................ 4  
VI . Product Appearance .................................................................. 5  
VII . Camera Operations ................................................................. 6  
VIII . Using the Remote Control ..................................................... 7  
IX . LCD Screen Display .................................................................. 7  
X . Camera Settings .......................................................................... 8  
XI . Power Supply ........................................................................... 12  
XII . MicroSD Card Insertion / Removal ...................................... 13  
XIII . Connecting to a Computer ................................................... 13  
XIV. Connecting to a Monitor ....................................................... 20  
XV . Troubleshooting ...................................................................... 21  
3. Software Installation CD  
1
at the top of the camera.  
again to stop recording. An animation showing  
4. Remote Control  
Dear Customer,  
4
5. Rechargeable Battery  
10  
6. Long Silicon Strap  
Shooting Photos  
2
Thank you for purchasing the ATC9K by Oregon Scientific.  
At Oregon Scientific, we understand that  
5
1. Aim the ATC9K at what you would like to take a picture.  
7. Long Velcro Strap  
16  
2. Press the Photo capture button  
3. The LCD display will be frozen for a while, indicates that the scene had been  
captured.  
at the top of the camera.  
8. Helmet Grip  
3
Disclaimer:  
adventure sports enthusiasts as well as everyday enthusiasts  
take great pride and satisfaction in recording and viewing  
first person footage captured by our hands free action cam.  
For this reason, the ATC9K was designed and engineered with  
extreme precision, in order to allow you to take the adventure  
home with you. Review the following pages for technical  
information, tips and troubleshooting which will allow you to  
maximize your experience with the ATC9K.  
17  
9. Handlebar Mount  
Oregon Scientific will not, under any circumstances, be responsible for injuries  
or property damage incurred during participation of any high-risk sports or  
activities not endorsed or recommended by Oregon Scientific. Should the  
camera malfunction under these circumstances, it will not be covered under  
warranty. The warranty covers manufacturing defects only.  
13  
II) Camera Precautions  
Notice the following guidelines when using your camera  
• The ATC9K is shock resistant, not shock proof.  
• For your safety, do not press the buttons on the camera during sports activities.  
• Do not place the camera in areas prone to dust or damp for extended periods  
of time. This may cause a fire or an electrical shock.  
• Do not leave the camera in places exposed to extremely high temperatures,  
such as under direct sunlight, for extended periods of time. This may affect  
the camera housing and internal components.  
• Clean the lens with a soft cloth to remove fingerprints or dust.  
• If the rechargeable battery is mishandled, it can burst, cause a fire or even  
chemical burns. Observe the following cautions.  
• Do not disassemble.  
• Do not crush and do not expose the rechargeable battery to any shock or force  
such as hammering, dropping or stepping on it.  
• Do not short circuit and do not allow metal objects to come into contact with  
the battery terminals.  
• Do not expose to extreme temperatures below 0°C (32°F) or above 40°C (104°F).  
• Do not incinerate or dispose of in fire.  
• Do not handle the damaged or leaking rechargeable battery.  
• Be sure to charge the rechargeable battery using a genuine ATC9K battery  
charger or charge it via the main unit.  
10.Base Mount and Tripod Mount  
15  
14  
11.Rubberized Patch  
12.Velcro Patch  
12  
Notes on copyright:  
13.USB Cable  
11  
Users are asked to note that the transfer of memory containing photos or data  
protected under copyright laws is only permissible within the restrictions imposed.  
Users assume all responsibility in the event that copyrights are violated by the  
use of this camera.  
14.HDMI Cable  
15.User Manual  
16.Screw  
8
IV) Computer System Requirements  
Minimum System Requirements  
• Windows Environment: 3.0 Ghz Intel Pentium D (dual-core) or faster  
• Mac Environment: Dual 2.0 GHz PowerMac G5 or faster; 2.0 GHz Intel Core  
Duo or faster  
• Windows XP (Service Pack 2 or later), Windows Vista, Windows7 or Apple  
Mac X 10.6 or above  
• 2GB RAM  
• 1G Free hard disk space  
• 1GB or greater video card  
• Quicktime 7  
• 1024x768 resolution video support (32 bit)  
• 16 bit Windows compatible sound device  
9
Waterproof Feature  
17.Nut  
7
The ATC9K camera is waterproof up to 20m (60ft). Oregon Scientific will not  
assume any responsibility for camera malfunction caused by liquid entering the  
camera as a result of misuse by the user.  
PLAY HARD, RECORD EVERYTHING!  
Liquid may get inside the camera if the battery cover is not firmly closed  
• If the camera gets wet, wipe the liquid off as soon as possible with a dry cloth.  
• Other camera accessories may not be waterproof.  
Don’t use the camera in extreme temperatures as this may cause the  
camera to malfunction.  
6
Items sold separately  
18.GPS Module  
(Items sold separately)  
18  
19  
19.External Battery Charger  
OREGON SCIENTIFIC and associated trademarks and trade dress are owned by  
OREGON SCIENTIFIC, Inc.  
© 2011 OREGON SCIENTIFIC, Inc. All Rights Reserved.  
III) Technical Specifications  
• Sensor resolution 5M pixels CMOS.  
* In some cases, the frame rate may be automatically reduced to maximize the  
memory usage.  
• Keep the rechargeable battery out of the reach of small children.  
1
2
3
4
6. To confirm an option, press “Play/Pause” button  
.
5. White B. (White Balance)  
4. Privacy  
3. During video playback, press “Play/Pause”  
, to pause or resume playback,  
VI) Product Appearance  
Main Unit  
VII) Camera Operations  
Display the video resolution setting.  
Display the photo resolution setting.  
7. To exit settings, press “Menu” button  
again.  
According to different environment, you can select Auto, Daylight, Cloudy, Fluorescent  
and Tungsten to adapt a correct color tone of the photo.  
6. Contrast  
According to your preference, you can adjust contrast level with Standard, Soft, Hard.  
7. Sharpness  
With Privacy mode on, all LED and Audio indicators will be turned off.  
5. Time Stamp  
press “Left” and “Right” button  
forward and fast reverse.  
to activate fast  
Turning the Camera On  
Video Settings  
Press the On/Off button  
. A start up screen will be shown on the  
Date and time will be stamped on the videos and photos with this setting being  
turned on.  
12  
10  
4. To exit the playback mode, press “Movie shutter” button  
1. Resolution  
11  
8
LCD screen.  
Display the EV value.  
or “Photo Capture” button  
.
You can set your video resolution here.  
9
6. LCD Sleep  
Display the quality setting of the videos & photos.  
Turning on for the first time  
According to your preference, you can adjust sharpness with Standard, Soft, Hard.  
This setting controls the sleep time of the LCD screen. While the LCD is sleeping,  
power consumption is reduced.  
Full HD/30  
HD/60  
1920x1080, 30 fps  
1280x720, 60 fps  
1280x720, 30 fps  
848x480, 60 fps  
Indicate that there is no microSD card inserted. The red line will disappear when a  
microSD card is inserted.  
1. The system will ask you to set the Date/Time/Timezone when  
the camera is turned on for the first time or the rechargeable  
battery is reinstalled.  
Delete a Video or Photo  
8. Effect  
7
6
1. Press the “Menu” button  
during playback mode, select the video or file  
You can add effects to the video too. Just select Vivid, Negative, Black and White,  
7. Auto Off  
3
2
1
4
5
Privacy Mode is on. It will disappear when it is disabled in the user settings.  
you want to delete with “Left” and “Right” button  
.
Sepia or Art.  
Sometimes you may want the camera to turn off automatically during idle.  
Set your preference here to do so.  
8. Date  
Set your date here.  
9. Time  
Set your time here.  
10. Timezone  
Set your timezone here.  
11. Language  
Set your system language here.  
12. Light Freq. (Light Frequency)  
HD/30  
2. Press  
selections.  
to select your options. Press  
to confirm your  
GPS function is on. It will disappear when the camera is not equipped with the  
GPS module or it is disabled in the user settings.  
9. Timer  
1
2
3
4
5
6
7
8
9
Play/Pause button  
Left button  
Play/Pause/Confirm  
Left  
2. Then press “Play/Pause”  
the dialogue box pops up.  
to confirm deletion after  
You can set a countdown time before the shutter captures automatically.  
10. Cont’ Shots (Continuous Shots)  
You can set the camera to either take 3 or 5 continuous shouts with this setting.  
11. Interval (Interval Shots)  
WVGA  
Recording Videos  
1. Aim at what you want to record.  
2. To start recording press the “Movie shutter button”  
at the top of the camera.  
3. The Laser Pointer at the front of the camera will be  
turned on for a more accurate adjustment of the target.  
Users can set the turn on time of the Laser Pointer in User Settings.  
(Do Not look directly to the Laser Pointer or aim at others’ eyes)  
4. The Laser Pointer will be turned off according to the user selected time.  
Then the camera will start recording (one sound effect with red LED light  
flashing). The Movie shutter icon will blink on the top left corner of the  
screen while the time elapsed will be shown at the bottom of the screen.  
GPS function is on but the GPS module is either searching or establishing connections  
with satellites. The process will take minutes to complete but the duration depends  
on the surroundings of your location as well as weather conditions.  
2. Quality  
You can select Fine, Good or Normal.  
Menu button  
Settings menu  
VIII) Using the Remote Control  
3. EV  
Right button  
Right  
You can set the camera to take photos within a certain time interval.  
1. Ensure you are pointing the remote control sensor towards the front of the  
camera. Press either the “Movie shutter” button or “Photo Capture”  
button  
G-Sensor function is on. It will disappear when it is disabled in the user settings.  
Night Mode is on. It will disappear when it is disabled in the user settings.  
The Exposure values range from +2.0 to -2.0. You can set the appropriate value to suit  
Power On-Off  
Power on/off unit  
Record start/stop  
Take photo  
your shooting environment.  
4. White B. (White Balance)  
Based on different surroundings, you can select Auto, Daylight, Cloudy, Fluorescent and  
Tungsten to adapt a correct color tone of the video.  
5. Contrast  
According to your preference, you can adjust the contrast level with Standard, Soft, Hard.  
G-Sensor Settings  
.
Movie Shutter button  
Photo Capture button  
USB Connection  
HDMI Connection  
1. Operate  
2. The red LED will flash to show recording or photo capturing has started.  
3. The buttons on the remote control carries the same functions as those found  
on the back of the camera.  
Continuous shots function is on. It will disappear when it is disabled in the user  
settings.  
You can turn on or off the G-Sensor here. Power consumption can be reduced by turning  
In order to avoid flickering in the video while shooting indoors, you need to adjust  
this setting to match the frequency of light source with that of the shutter.  
off the G-Sensor.  
2. Data Display  
Interval shots function is on. It will disappear when it is disabled in the user settings.  
Self timer function is on. It will disappear when it is disabled in the user settings.  
Display the white balance setting.  
Connect to the computer  
Connect to the TV  
Insert microSD card  
Insert rechargeable battery  
Insert GPS Module  
13. Bg. Music (Background Music)  
You can display G-Sensor related data on the videos and photos via HDMI output by  
turning on this setting.  
The background music being played when the camera is turned on and off, can be  
switched to on or off by this setting.  
6. Sharpness  
IX) LCD Screen Display  
According to your preference, you can adjust the sharpness with Standard, Soft, Hard.  
5. To stop recording press the “Movie shutter button”  
camera again.  
at the top of the  
10 microSD card slot  
11 Battery Compartment  
12 GPS Module slot  
14. Format  
7. Effect  
GPS Settings  
You can format the microSD card inserted in the camera with this setting.  
15. Factory Set. (Factory Settings)  
Restore back to the factory default settings.  
16. Leveling  
You can add effects to the video too. Just select Vivid, Negative, Black and White,  
Display the battery status.  
GPS Module is sold separately. Please refer to the corresponding manual for these settings.  
Video/Photo Quality  
Sepia or Art.  
8. Duration  
To record a video with a time limit, select a duration here.  
Taking Photos  
1. Aim at what you want to capture.  
2. Press the “Photo capture button”  
camera.  
3. A shutter sound and the red LED will blink once to  
indicate that a photo was taken. A preview will be  
shown on the LCD screen briefly.  
Video Resolution  
Photo Resolution  
EV  
X) Camera Settings  
General Settings  
at the top of the  
There are 5 main camera settings which are Video, Photo, G-Sensor,  
GPS and General Settings. The GPS setting is activated only when the  
GPS module (sold separately) is attached onto the camera.  
Remote Control Unit  
This setting will display an on-screen metre for users to  
adjust the horizontal and vertical position of the camera.  
The green dots represent the extend of the tilting  
deviations. The camera unit is placed horizontally and  
vertically neutral only when the centre green dots lights  
up.  
1. Laser Pt. (Laser Pointer)  
Photo Settings  
No SD Card Inserted  
Night Mode On  
1
2
3
4
5
6
Play/Pause button  
Play/Pause/Confirm  
This setting allows you to have either 5 or 10 seconds to adjust the direction of the  
camera using the laser pointer before the capturing of videos after you press the “Movie  
(Remove Red Line if inserted)  
(disappear when Off)  
1. Resolution  
1. To enter into Settings, press “Menu” button  
view mode.  
in the live  
1
2
3
4
Left button  
Left  
You can set your photo resolution here with either 3megapixels or 5megapixels.  
2. Quality  
You can select Fine, Good or Normal.  
3. Night Mode  
Privacy Mode On  
(disappear when Off)  
Cont’ Shots On  
(disappear when Off)  
Shutter” button  
.
Right button  
Right  
2. Volume  
You can adjust the sound volume here.  
3. Mic. Level (Microphone Level)  
The sensitivity of the microphone can be adjusted with this settings. If “Off” is selected,  
2. You can scroll through these categories by pressing “Left”  
and “Right” buttons  
GPS On  
(disappear when Off or no  
module)  
Playback  
1. Press the “Play/Pause”  
White Balance Setting  
.
Menu button  
Settings menu  
Record/Stop button  
Take photo  
, then the screen will switch to playback mode.  
17. Version  
3. To enter the category, press “Play/Pause” button  
4. To select a setting, press “Play/Pause” button  
.
G Sensor On  
(disappear when Off)  
You can turn it on in order to have a boost of exposure during the night.  
5
6
Battery  
2. Press “Left” and “Right” button  
want to playback.  
to select the video or photo that you  
Display the current system version.  
Movie Shutter button  
Photo Capture button  
(4 states)  
.
4. EV  
that means the audio signal is being turned off.  
5. To select options under a setting, press “Left” and “Right”  
buttons  
The Exposure values range from +2.0 to -2.0. You can set the appropriate value to  
suit your shooting environment.  
Lapse Time (when recording and playback)  
Remaining Time (when viewing)  
.
5
7
8
9
10  
11  
6
ATC9K US manual 16DEC R15.indd  
1
12/16/11 3:52:33 PM  
 

Miele Cooktop KM6328 User Manual
Miele Dishwasher 05 620 661 User Manual
Miele Refrigerator KT 12410 S 1 User Manual
MRV Communications Network Card TS700 100 User Manual
Multiquip Saw HS62A User Manual
Multi Tech Systems Network Card MT5634MSV User Manual
New Holland Lawn Mower FR9040 User Manual
Nilfisk Advance America Automobile 56380676 User Manual
NuTone Outdoor Storage 935 936 User Manual
Omega Engineering Network Card DAQ 12 User Manual