wooden aroma diffuser
Model: WS909G
USER MANUAL
•
•
If the supply cord is damaged, it must be
replaced by special cord or assembly
available from the manufacturer or its service
agent.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
INTRODUCTION
a
Thank you for your purchase of WS909G.
Please read these instructions carefully
and keep the manual near for future reference. By
breaking up a mixture of water and essential oils
into millions of micro-particles, this aroma diffuser
is designed to help you relax at home. Oregon
Scientific designed this product to provide you
with three of the well known holistic relaxation
methods: Aromatherapy, Colour Therapy and
Sound therapy.
•
•
Children should be supervised to ensure that
they do not play with the appliance
The instructions shall include the substance of
the following:
PRECAUTIONS
The appliance is only to be used with the
recommended vaporizing medium. The use
of other substances may give rise to a toxic
or fire risk.
For the alliances that are directly plugged
into socket-outlets, if the temperature rise of
accessible surfaces during the test of Clause
11 exceeds the value specified for handles,
knobs, grips and similar parts that are held
for short periods only in normal use, the
instructions shall include the substance of the
following:
•
Do not turn the unit upside down without
removing the Glass Cover, Plastic Cover and
/ or the liquid content from the water tank as
described in the user manual when attempting
to plug or unplug any cable.
•
•
•
•
Handle the unit and the Glass Cover with extra
care.
Do not fill more than the maximum mark
indicated at the interior of the water tank.
Do not subject the unit to excessive force,
shock, dust, temperature or humidity.
Store and use the aroma diffuser at room
temperature only, and do not use when the
room temperature is very low (< 0°C).
Do not cover the ventilation holes with any
items such as newspapers, curtains etc.
•
The unit has hot surfaces to evaporate the
active ingredients and these surfaces should
not be touched during use.
•
•
NOTE
The technical specifications for this
product and the contents of the user manual are
subject to change without notice.
Remove dust regularly with
a
dry cloth.
Accumulated dust poses a potential of fire
hazard.
NOTE
Features and accessories will not be
available in all countries. For more information,
please contact your local retailer.
•
•
Do not expose your aroma diffuser to extreme
heat or light (e.g. direct sunlight).
Do not immerse the unit in water. If you spill
any liquid on it, dry it immediately with a soft,
lint-free cloth.
OVERVIEW
•
Do not clean the unit with abrasive or corrosive
materials.
1.
•
•
Only use fresh batteries.
2.
When disposing this product, ensure it
is collected separately for special waste
treatment.
•
Placement of this product on certain types of
timber may result in damage to its finish for
which Oregon Scientific will not be responsible.
Consult the furniture manufacturer’s care
instructions for information.
•
•
•
Images shown in this manual may differ from
the actual display.
Do not tamper with the unit’s internal
components. This invalidates the warranty.
The contents of this manual may not be
reproduced without the permission of the
manufacturer.
3.
•
Do not dispose old batteries as unsorted
municipal waste. Collection of such waste
separately for.
1.
2.
Diffuser outlet
Glass Cover
3. LED Indicator Light: Orange / Red light
1
GETTING STARTED
Connecting to power mains
1. Remove the battery protector before first use.
2. Remove the Glass Cover and the Plastic
Cover from the unit.
4.
5.
4. DC: Socket for connecting to AC / DC power
adaptor.
5. Audio Line in Jack
Water tank
Plastic Cover
Glass Cover
3. Plug the power adaptor to the DC Jack.
4. Place the unit on a stable and even surface.
5. Pour maximum 65ml of room temperature tap
water into the water tank.
REMOTE CONTROL
6. Add few drops of essential oil into the water
tank as illustrated.
1.
4.
7. Put the Plastic Cover and Glass cover back
to the unit.
2.
3.
5.
6.
1. POWER button: Turn on / off the unit.
2. SLEEP TIMER button: Set diffuser timer
(120mins / 60 mins / OFF)
3. VOLUME button: Set speaker volume (low /
medium / high)
4. DIFFUSE button: Turn on / off the diffuse function
5. LIGHT button: Press to choose light setting:
Red / Orange / Yellow / Green / Blue / Purple
/ Loop / OFF
8. Connect the power adaptor the mains power
supply.
9. Press the POWER
button on the remote
control to turn on the unit.
NOTE
6. TUNE button: Press to toggle one of the 5
background tunes
Do not use distilled water.
Do not use water over 40 °C.
•
•
•
•
Use water soluble essential oil only.
Switch off and unplug the unit from the mains
before moving or cleaning the unit.
Do not overfill the water tank. The timber body
of the unit will crack if absorbed too much
moisture. Always keep the timber body dry.
Do not turn the unit upside down when the
water tank is filled and /or the Glass Cover and
/ or the Plastic Cover have not been removed
from the unit.
FEATURES
1. Unltrasonic Diffusing Technology
2. Soothing Sounds and Music line-in
3. Colour light effect
4. Material: Natural wood
5. Ultrasonic technology with special mist
dispersion effect
•
•
6. Light effect in 6 colors (Red, Orange, Yellow,
Blue, Green, Purple)
To pour away the remnant from the water tank
1. Press the POWER button at the remote
7. Choice of 2 natural sounds and 3 musical
pieces
control to turn off the unit and unplug from the
mains.
8. Audio music line-in
9. Remote control
2. Remove the Glass Cover and Plastic cover
from the unit.
3. Pour the remnant away as illustrated.
10. Sleep timer function
11. Low water level indicator
12. Power: AC / DC adaptor (included)
2
•
When 60 mins timer is selected one orange
indicator light will turn on and the countdown
starts instantly.
NOTE
The unit will switch off when the timer ends. Press
the POWER
button again to turn on the unit
and select functions.
TUNE SETTINGS AND EXTERNAL
AUDIO DEVICES
4. Put the covers back to the unit when finished.
•
Press the TUNE
button repeatedly to
choose background tunes or to turn off the
tune function.
There are 5 tunes of choices.
IMPORTANT
Do not pour the remnants from the diffuser
outlet.
•
•
Do not pour the remnants from any other side
of the water tank to avoid the remnants drips
to the timber body.
If the remnants spilt accidently to the timber
body, the power cable or the power plug,
immediately wipe with a soft lint-free cloth to
remove all the moisture.
•
Using external audio devices
The Zen Aroma Diffuser is compatible with any
audio device with a 3.5mm audio output jack.
To connect a external audio device to the unit:
1. Turn off the unit by pressing the POWER
•
button
at the control panel.
2. Remove the Glass Cover and Plastic Cover
and pour away the liquid in the water as
described in GETTING STARTED.
3. Connect the external audio device with the
bullet-shaped plug of 3.5mm audio cable and
connect the unit with the L-shaped plug of the
same cable.
USING THE AROMA DIFFUSER
DIFFUSION
•
Press the DIFFUSE
button to turn on
4. Place the unit and the audio device on a
stable and even surface.
5. Pour maximum 65ml of room temperature tap
water into the water tank.
6. Add few drops of essential oil into the water
tank.
aroma diffusion function
•
•
Press again to turn off the diffusion function
When there is no or not enough water, the red
indicator light will flash unit the water tank is
filled. You should turn off the unit by press the
POWER
button, refill the water tank and
7. Put the Plastic Cover and Glass cover back to
the unit as described in GETTING STARTED.
8. Connect the power adaptor the mains power
supply.
then turn on the unit and diffusion function
again.
NOTE
Do not direct the aroma mist towards furniture or
electrical appliances.
9. Press the POWER
button on the remote
control to turn on the unit.
10. Turn on the external audio device, the
speaker of the unit will start broadcasting the
content immediately.
LIGHTING SETTINGS
•
Press the LIGHT
lighting.
button to turn on the
NOTE
•
Press the LIGHT
button repeatedly to
•
The background tune function of the unit will
not be able to operate when the 3.5mm audio
plug is connected to the unit, even when there
is no audio device connected.
select desired lighting mode or to turn lighting
off.
•
The order of setting choices is red, orange,
yellow, green, blue, purple, loop and off.
•
Do not turn the unit upside down without
removing the Glass Cover, Plastic Cover and
/ or the liquid content from the water tank as
described above when attempting to plug or
unplug any cable.
SLEEP TIMER SETTINGS
•
Press the SLEEP TIMER
button repeatedly
to toggle timer setting or to turn off the timer.
The order of setting choices is 120 mins, 60
mins and off.
When 120 mins timer is selected two orange
indicator light will turn on and the countdown
starts instantly. When there is 60 mins left
one of the orange indicator light will switch off
automatically.
•
Do not connect the line in jack of the unit with
the bullet-shaped plug of the 3.5mm audio
cable. The unit will not be able to stand upright
properly.
•
•
3
ABOUT OREGON SCIENTIFIC
VOLUME SETTINGS
Visit our website
(
)
•
Press the VOLUME
button repeatedly to
adjust the speaker volume.
The order of setting choices is low, medium
and high.
If you’re in the US and would like to contact our
Customer Care department directly, please visit:
us.oregonscientic.com
•
OR
Call 1-800-853-8883.
For international inquiries, please visit:
CLEANING THE WATER TANK
The water tank should be cleaned regularly by
using the cleaning clip.
1. Remove the Glass Cover and Plastic Cover
from the unit. Pour away any remnant from
the water tank as described in GETTING
STARTED.
2. Pick a small piece of soft lint-free cloth by the
cleaning clip.
3. Reach and clean the diffuser plate at the base
of the water tank with the cleaning clip and the
cloth. Clean also the interior of the water tank.
4. Put the covers back to the unit.
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
WARNING
Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
MAINTENANCE
•
The suitable water temperature for the water
tank is 15 - 40 °C.
•
•
Clean water tank and cover weekly.
Refresh the water in the water tank each time
you use the unit.
Make sure the unit has been cleaned, drained
and dried completely, including the body, the
water tank, the cables and plugs, with a soft
and dry cloth when you are not going to use
the unit for a long time.
Do not immerse the whole unit or any cables
and plugs in water or any other liquid. Clean
the base unit and the body with a dry cloth.
Do not use cleaning or scouring agents.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
•
These limits are designed to provide reasonable
protection against harmful interference in
a
residential
installation.
This
equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio
•
•
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
SPECIFICATIONS
DESCRIPTION
TYPE
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
MAIN UNIT
– Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio TV
technician for help.
80mm(L)x80mm(W)x 228mm(H)
(3.15in x 3.17in x8.98in)
700g ( 1.54lbs)
L x W x H
Weight
Power adaptor: INPUT 100 –
240V ~ 50/60Hz
Power
NOTE
reserves the right to interpret and construe any
contents, terms and provisions in this user manual
and to amend it, at its sole discretion, at any time
without prior notice. To the extent that there is any
inconsistency between the English version and
any other language versions, the English version
shall prevail.
4
|