Faxable Datasheet – H78DC3-01
H78DC3
The H78DC3 Home Theater Projector from Optoma
combines the best engineering expertise with the latest
DarkChip3™ DLP™ technology
The H78DC3 combines the latest DC3 chipset from Texas Instruments
with Optoma’s renowned engineering expertise to deliver an amazing
home theater projector. The Optoma H78DC3 provides vivid, crisp digital
images that won’t fade or degrade over time and provides HDTV native
picture quality. The H78DC3 is home theater perfection.
.
♦ Advanced DarkChip3™ DLPTM Technology
♦ HDTV native for viewing widescreen TV signals
♦ 4000:1 contrast ratio – delivers subtle color details
♦ 5x, 8-segment DVE color wheel technology with
additional dark segments
♦ 800 lumens rating
♦ Lamp life of 2,750 hours while operating at 25 decibels
♦ Expanded connectivity includes DVI-I, BNC, component
and S-Video hookups
SPECIFICATIONS
Compatibility:
VGA, SVGA, XGA, WXGA, UXGA
compression
Full NTSC/PAL/SECAM, VESA, Mac, PC
True HDTV (720p, 1080i) & 480/p, 576i/p
Brightness: (typical)
800 lumens
Operating Temperature:
23 - 95°F (-5 - 35°C)
80% maximum humidity
Resolution:
720p native (1,280 x 720)
UXGA (1,600 x 1,200)
compression
Storage Temperature:
14 - 140°F (-10° - 60°C)
80% maximum humidity
Communications:
Dual +12V trigger relay, RS-232 controls
Contrast Ratio: (full on/full off)
4000:1
Weight:
16.5 pounds (7.5 kg)
Lens Shift:
Enables image to be displayed 100% above
or below the center of the lens
Lamp Type:
250W UHP
Dimensions (w x h x d):
16.9 x 5.3 x 12.0 inches
(430 x 135 x 305 mm)
User Controls:
Advanced adjustability offered through
onscreen display menus
Display Type:
DarkChip3 0.79-inch
Warranty:
Two-year, limited parts and
labor
Throw Ratio: (distance/width)
1.6:1 - 2.16:1
I/O:
Inputs: DVI-I/HDCP, BNC, YcbCr/YpbPr,
RCA-type jack, S-Video, dual IR receivers
Outputs: Dual +12V relay, RS-232
Image Size: (diagonal)
20.9 to 338.8 inches
(0.53 to 8.6 meters)
Standard Accessories:
DVI-I to HDMI adapter, AC
power cord, S-Video cable,
composite cable, Remote
control, lens cap, two
batteries, user manual,
RS232 cable
Power Consumption:
320 watts, <20 watts in standby mode
Projection Distance:
3.28 to 39.37 feet
(1.0 to 12 meters)
Power Supply:
AC Input 90 to 264 volts, 50-60 Hz
Noise Level:
25 dB
UPC:
796435 21 732 7
Projection Lens:
f=28.3 – 38.2 mm, F/2.4-2.69, 1.35x power
zoom and focus
©
Copyright 2005 Optoma Technology, Inc. DLPTM and the DLPTM medallion are trademarks of Texas Instruments. All specifications subject to change at
|