One for All Universal Remote URC 7200 7201 User Manual

URC 7200 / 7201  
Cinema 7  
User Manual  
 
3.  
4.  
Enter the first four-digit Cassette Player code  
listed for your brand in the “Setup Codes For  
Audio Cassettes” section. If you perform this  
procedure correctly, the red light will blink twice  
when you enter the final digit of your code.  
Amplifier does not respond, repeat steps 2-4,  
trying each code listed for your brand until you  
find the one that operates your Amplifier.  
Remember, if you want to use your Cinema 7 to operate  
Locate the brand name of your CD Player in the “Setup  
Codes For CD Players” section. The brands are listed in  
alphabetical order with the most popular codes listed  
first. You will use one of these codes to program your  
Cinema 7 to operate your CD Player.  
The PREV CH (Previous Channel) key  
operates the same as the Last Channel or  
Recall key on your original remote. The PREV  
CH key also controls the following functions in  
other modes: DVD/LD, RCVR, AUX and CD  
mode = Random.  
functions in other modes: DVD/LD mode =  
PREV CH  
your VCR, press the VCR key first.  
Angle, CBL/SAT mode = Next.  
NOTE: If your TV/VCR is working on one of the above  
codes highlighted with an asterisk (*), you may need to  
program a separate TV code in order to control the volume.  
Check the list of codes below and follow the instructions  
detailed in the “Programming the Cinema 7 to Operate  
Your TV” section to program the supplied TV code.  
TV/VCRs working on VCR code 0032 may require  
TV code 0000 for volume control.  
The SURROUND key operates the same as the  
Surround On/Off key on your original remote.  
The SURROUND key also controls the following  
functions in other modes: VCR mode = Auto  
Tracking, DVD/LD mode = Disc, CBL/SAT mode  
= Favorite Channel, CD mode = 10+.  
SURROUND  
5.  
Your Cinema 7 is now programmed to operate  
your Amplifier. Write your Amplifier code in the  
boxes to the left for future reference.  
Aim the Cinema 7 at your Cassette Player and  
press PL (Play). Your Cassette Player  
should play your tape. If your Cassette Player  
does not respond, repeat steps 2-4, trying  
each code listed for your brand until you find  
the one that operates your Cassette Player.  
To program the Cinema 7 to operate your CD Player:  
PL  
1.  
Turn on your CD Player and insert a disc.  
FEATURES AND FUNCTIONS  
CH  
CH  
The CH L/L, VOL L/L, MUTE, PREV CH  
and Digit (0-9) keys are made of a phospho-  
rescent material that glows-in-the-dark.  
Expose the keys to bright light to activate the  
glow-in-the-dark feature. The length of time the  
keys remain illuminated will be determined by  
the length of time the remote is exposed to  
bright light.  
2.  
CD  
Press CD and release. Press and hold MAGIC  
until the Cinema 7’s red light blinks twice, then  
release MAGIC.  
Remember, if you want to use your Cinema 7 to operate  
your Amplifier, press the AUX key first.  
Here are the features and functions of the Cinema 7  
universal remote control. Use the drawing to locate each  
feature of the remote, then refer to the chart for a descrip-  
tion of what function each feature performs.  
MAGIC  
The MACRO and MACRO2 keys can  
MACRO  
MACRO 2  
memorize up to 15 keystrokes per key that can  
be accessed in sequence with a single key  
press. These keys are not mode specific.  
VOL  
VOL  
TV/VCRs working on VCR code 0035 may require  
TV code 0051 for volume control.  
3.  
4.  
Enter the first four-digit CD Player code listed  
for your brand in the “Setup Codes For CD  
Players” section. If you perform this procedure  
correctly, the red light will blink twice when you  
enter the final digit of your code.  
SEARCHING FOR YOUR CODE  
5.  
Your Cinema 7 is now programmed to operate  
your Cassette Player. Remember, if you want  
to use your Cinema 7 to operate your Cassette  
Player, press the VCR key first.  
TV/VCRs working on VCR code 0048 may require  
TV code 0093 for volume control.  
If your TV, VCR or Cable Converter does not respond to  
the Cinema 7 after trying all of the codes listed for your  
brand, or if your brand is not listed at all, try searching for  
your code. For example, after trying all of the codes for  
your TV, you still cannot get the Cinema 7 to operate your  
TV, then:  
MUTE  
TV/VCRs working on VCR code 0060 may require  
TV code 0047 for volume control.  
INSTALLING THE BATTERIES  
PREV CH  
Your Cinema 7 requires four (4) new AAA alkaline  
TV/VCRs working on VCR code 0081 may require  
TV code 0054 for volume control.  
RE-ASSIGNING DEVICE KEYS  
0 - 9  
Aim the Cinema 7 at your CD Player and press  
PL (Play). Your CD Player should play your  
disc. If your CD Player does not respond,  
repeat steps 2-4, trying each code listed for  
your brand until you find the one that operates  
your CD Player.  
PL  
batteries. To install the batteries:  
You can use the Cinema 7 to operate a second TV or a  
second VCR or any combination of seven home entertain-  
ment components. For example, you may want your  
Cinema 7 to control 1 TV, 1 Cable Converter, 1 Receiver, 1  
CD Player, 1 DVD Player and 2 VCRs. To accomplish this,  
you must re-assign one of the device keys to operate the  
desired component, in this case, a second VCR. The chart  
below shows you how to re-assign a particular device key  
and then set up your new component.  
1.  
On the back of the Cinema 7, pull back on the tab  
TV/VCRs working on VCR code 0162 may require  
TV code 0250 for volume control.  
The SLEEP key accesses the Sleep Timer of  
your home entertainment components (TV,  
CABLE/SAT, RCVR and AUX modes only).  
Even if your component does not have a Sleep  
Timer, the Cinema 7 may access its own built-  
in sleep timer.  
1.  
Turn on your TV.  
SLEEP  
and lift the battery cover off.  
TV  
TV/VCRs working on VCR code 0278 may require  
TV code 0451 for volume control.  
2.  
Press TV and release. Press and hold MAGIC  
until the Cinema 7’s red light blinks twice, then  
release MAGIC.  
2.  
Match the + and - marks on the batteries to the +  
and - marks in the battery case, then insert the  
batteries.  
MAGIC  
5.  
Your Cinema 7 is now programmed to operate  
your CD Player. Write your CD Player code in  
the boxes to the left for future reference.  
Programming the Cinema 7 to operate your DVD or  
Laser Disc Player:  
Locate the brand name of your DVD or Laser Disc Player  
and then write it in the space below.  
3.  
4.  
Press 9 - 9 - 1.  
9 - 9 - 1  
3.  
4.  
Press the battery cover back into place.  
The REW (Rewind), PL (PLAY), FF (Fast  
Forward) REC (Record), STOP, and PAUSE  
keys operate the same as the transport keys  
on your original VCR, Laser Disc, DVD and CD  
Player remote. As a safety feature of the  
Cinema 7, you must press the REC key twice  
before recording.  
REW  
PL  
POWER  
Slowly alternate between pressing POWER*  
and TV until your TV turns OFF. Make sure that  
the Cinema 7 is aimed at your TV during the  
search. You may have to press this sequence  
of buttons (POWER* then TV) up to 100 times  
to search the entire library of codes.  
TV to VCR  
MAGIC* + 992 + VCR + TV + TV +  
MAGIC* + VCR code  
MAGIC* + 992 + DVD/LD + TV + TV +  
MAGIC* + DVD or LD Player code  
MAGIC* + 992 + RCVR + TV + TV +  
MAGIC* + Audio code  
MAGIC* + 992 + AUX + TV + TV +  
MAGIC* + Audio code  
MAGIC* + 992 + CD + TV + TV +  
MAGIC* + CD Player code  
MAGIC* + 992 + CBL/SAT + TV + TV  
+ MAGIC* + Cable/DBS code  
MAGIC* + 992 + TV + VCR + VCR +  
MAGIC* + TV code  
MAGIC* + 992 + DVD/LD + VCR + VCR  
+ MAGIC* + DVD or LD Player code  
MAGIC* + 992 + RCVR + VCR + VCR  
+ MAGIC* + Audio code  
MAGIC* + 992 + AUX + VCR + VCR +  
MAGIC* + Audio code  
MAGIC* + 992 + CD + VCR + VCR +  
MAGIC* + CD Player code  
Test the unit by pressing POWER. If the batteries  
are inserted correctly, the red light will blink.  
DVD/LD Brand:  
Remember, if you want to use your Cinema 7 to operate  
your CD Player, press the CD key first.  
TV to DVD/LD  
TV to RCVR  
TV to AUX  
Locate the brand name of your DVD or Laser Disc Player  
in the “Setup Codes For DVD or Laser Disc Players”  
section. The brands are listed in alphabetical order with  
the most popular codes listed first. You will use one of  
these codes to program your Cinema 7 to operate your  
DVD or Laser Disc Player.  
NOTE: Removing the batteries will not require you to  
reprogram your remote control because the Cinema 7 has  
unlimited memory backup.  
FF  
Programming the Cinema 7 to operate your Cable  
Converter or Satellite:  
Locate the brand name of your Cable Converter or  
Satellite and then write it in the space below.  
REC  
5.  
When your TV turns OFF, press and release  
MAGIC to lock in the code for your TV. Your  
Cinema 7 is now programmed to operate your TV.  
SETTING UP YOUR COMPONENTS  
STOP  
TV to CD  
Cable Converter Brand:  
To program the Cinema 7 to operate your DVD or Laser  
Disc Player:  
Programming the Cinema 7 to operate your TV:  
Locate the brand name of your TV and then write it in the  
space below.  
PAUSE  
or  
TV to CBL/SAT  
VCR to TV  
Satellite Brand:  
1.  
Turn on your DVD or Laser Disc Player and  
insert a disc.  
*If you are searching for your VCR, CD, LD or DVD Player  
code, you may want to use the PL (Play) key instead of  
the POWER key to search for your code. When your VCR  
starts to play, press MAGIC to lock in your code.  
NOTE: To search for the codes of your other components,  
repeat Steps 1 through 4, only substitute the appropriate  
device key (VCR, DVD/LD, RCVR, AUX, CD or CABLE/  
SAT) for the component you are searching for.  
Locate the brand name of your Cable Converter or  
Satellite in the “Setup Codes For Cable Converters or  
Satellites” section. The brands are listed in alphabetical  
order with the most popular codes listed first. You will use  
one of these codes to program your Cinema 7 to operate  
your Cable Converter or Satellite.  
TV Brand:  
TV/VCR  
The TV/VCR key operates the same as the TV/  
VCR key on your original VCR remote. The TV/  
VCR key also controls the following functions in  
other modes: TV mode = TV/VIDEO, CBL/SAT  
mode = A/B or TV/SAT, DVD/LD mode = TV/LD,  
RCVR mode = Input Select, CD mode = A/B.  
2.  
Press DVD/LD and release. Press and hold  
MAGIC until the Cinema 7’s red light blinks  
twice, then release MAGIC.  
DVD/LD  
Locate the brand name of your TV in the “Setup Codes  
For TVs” section. The brands are listed in alphabetical  
order with the most popular codes listed first. You will use  
one of these codes to program your Cinema 7 to operate  
your TV.  
VCR to DVD/LD  
VCR to RCVR  
VCR to AUX  
VCR to CD  
MAGIC  
3.  
4.  
Enter the first four-digit DVD or Laser Disc  
Player code listed for your brand in the “Setup  
Codes For DVD or Laser Disc Players” section.  
If you perform this procedure correctly, the red  
light will blink twice when you enter the final  
digit of your code.  
To program the Cinema 7 to operate your Cable Converter  
or Satellite:  
To program the Cinema 7 to operate your TV:  
The MENU key operates the same as the  
MENU or OSD (On Screen Display) key on  
your original remote. Use L,LL, , and  
(Menu Up, Down, Left and Right) to navigate  
your menus. If your original remote control had  
a SELECT key to select options in your menus,  
use SEL. Use the EXIT key to exit/clear your  
On-Screen menus. Please consult your home  
entertainment component’s original owner’s  
manual for more detailed instructions on  
accessing and navigating your On-Screen  
menus.  
1.  
2.  
Turn on your TV.  
1.  
Turn on your Cable Converter or Satellite.  
LEARNING THE CODES PROGRAMMED INTO  
THE CINEMA 7  
FEATURES AND FUNCTIONS  
Press TV and release. Press and hold MAGIC  
until the Cinema 7’s red light blinks twice, then  
release MAGIC.  
2.  
Press CABLE/SAT and release. Press and  
hold MAGIC until the Cinema 7’s red light  
blinks twice, then release MAGIC.  
VCR to CBL/SAT MAGIC* + 992 + CBL/SAT + VCR +  
TV  
MENU  
The Light (LED) flashes red to show that the  
remote is working and is sending a signal.  
CABLE/SAT  
VCR + MAGIC* + Cable/DBS code  
If you have set up the Cinema 7 using the “SEARCHING  
FOR YOUR CODE” procedure, you may want to figure out  
which three-digit code is operating your equipment. Use  
this procedure after you have set up your components to  
find out which four-digit code is operating your equipment.  
For example, to find out which code is operating your TV  
after setting up your TV using the “SEARCHING FOR  
YOUR CODE” procedure:  
Aim the Cinema 7 at your DVD or Laser Disc  
POWER Player and press POWER. Your DVD or Laser  
Disc Player should turn off. If your DVD or  
Laser Disc Player does not respond, repeat  
steps 2-4, trying each code listed for your  
brand until you find the one that operates your  
DVD or Laser Disc Player.  
DVD/LD to TV  
MAGIC* + 992 + TV + DVD/LD + DVD/  
LD + MAGIC* + TV code  
MAGIC  
MAGIC  
The MAGIC key is used to program your  
Cinema 7.  
MAGIC  
3.  
4.  
Enter the first four-digit TV code listed for your  
brand in the “Setup Codes For TVs” section. If  
you perform this procedure correctly, the red  
light will blink twice when you enter the final  
digit of your code.  
3.  
4.  
Enter the first four-digit Cable Converter or  
Satellite code listed for your brand in the “Setup  
Codes For Cable Converters or Satellites”  
section. If you perform this procedure correctly,  
the red light will blink twice when you enter the  
final digit of your code.  
DVD/LD to VCR  
MAGIC* + 992 + VCR + DVD/LD +  
DVD/LD + MAGIC* + VCR code  
The POWER key controls power ON and OFF  
POWER the same as the POWER key on your original  
remote. Please note that most CD Players do  
not have an ON/OFF function on the original  
remote control. If this is the case with your CD  
Player, then POWER will have no effect on  
your CD Player.  
DVD/LD to RCVR MAGIC* + 992 + RCVR + DVD/LD +  
DVD/LD + MAGIC* + Audio code  
DVD/LD to AUX  
DVD/LD to CD  
MAGIC* + 992 + AUX + DVD/LD +  
DVD/LD + MAGIC* + AUDIO code  
MAGIC* + 992 + CD + DVD/LD +  
DVD/LD + MAGIC* + CD Player code  
SEL  
EXIT  
TV  
1.  
Press TV and release. Press and hold MAGIC  
until the Cinema 7’s red light blinks twice, then  
release MAGIC.  
5.  
Your Cinema 7 is now programmed to operate  
your DVD or Laser Disc Player.  
Write your DVD or Laser Disc Player code in  
the boxes to the left for future reference.  
Aim the Cinema 7 at your TV and press  
POWER. Your TV should turn off. If  
your TV does not respond, repeat steps 2-4,  
trying each code listed for your  
brand until you find the one that operates your  
TV.  
POWER  
POWER  
Aim the Cinema 7 at your Cable Converter or  
Satellite and press POWER.Your Cable  
Converter or Satellite should turn off. If your  
Cable Converter or Satellite does not respond,  
repeat steps 2-4, trying each code listed for  
your brand until you find the one that operates  
your Cable Converter or Satellite.  
MAGIC  
DVD/LD to CBL/SAT MAGIC* + 992 + CBL/SAT + DVD/LD +  
The  
Right) keys are used to navigate your On-Screen  
menus. The  
,
, LL, and L (Menu Up, Down, Left and  
DVD/LD + MAGIC* + Cable/DBS code  
The TV, VCR, DVD/LD, RCVR, AUX, CD and  
2.  
3.  
Press 9 - 9 - 0.  
9 - 9 - 0  
TV  
RCVR to TV  
MAGIC* + 992 + TV + RCVR + RCVR  
+ MAGIC* + TV code  
CABLE/SAT keys are used to select the home  
,
, L, and L keys also control  
Remember, if you want to use your Cinema 7 to operate  
your DVD or Laser Disc Player, press the DVD/LD key first.  
VCR  
entertainment component you want to control.  
For the first digit of your four-digit code, press  
1 and count the number of times the red light  
(LED) blinks on the Cinema 7. If the light does  
not blink when you press the number 1, the  
digit is zero.  
1
the following functions in other modes: RCVR  
and AUX mode = Rear Level +/- and Balance  
Left/Right, CD mode = Track+/- and Disc +/-.  
RCVR to VCR  
MAGIC* + 992 + VCR + RCVR +  
RCVR + MAGIC* + VCR code  
If your component does not respond when you  
DVD/LD  
5.  
Your Cinema 7 is now programmed to operate  
your TV. Write your TV code in  
the boxes to the left for future reference.  
press a key on the remote control, press the  
Programming the Cinema 7 to operate your Receiver/  
Tuner:  
Locate the brand name of your Receiver/Tuner and then  
write it in the space below.  
RCVR to DVD/LD MAGIC* + 992 + DVD/LD + RCVR +  
RCVR + MAGIC* + DVD or LD Player  
code  
appropriate device key (TV, VCR,  
5.  
Your Cinema 7 is now programmed to operate  
your Cable Converter or Satellite. Write your  
Cable Converter or Satellite code in the boxes  
to the left for future reference.  
RCVR  
DVD/LD, RCVR, AUX, CD or CABLE/SAT)  
The SEL (Select) key selects options in your  
On-Screen menus. The SEL key also controls  
the following functions in other modes: RCVR  
and AUX mode = Surround Mode, CD mode =  
Disc Select, DVD/LD mode = Chapter.  
AUX  
first to tell the remote control which component  
4.  
5.  
6.  
For the second digit, press 2 and count the  
number of times the red light (LED) blinks on  
the Cinema 7. If the light does not blink when  
you press the number 2, the digit is zero.  
RCVR to CD  
MAGIC* + 992 + CD + RCVR + RCVR  
+ MAGIC* + CD Player code  
you would like the remote to operate.  
2
3
4
CD  
SEL  
Receiver/Tuner Brand:  
Remember, if you want to use your Cinema 7 to operate  
your TV, press the TV key first.  
RCVR to CBL/SAT MAGIC* + 992 + CBL/SAT + RCVR +  
CABLE/SAT  
Locate the brand name of your Receiver/Tuner in the  
“Setup Codes For Receivers/Tuners” section. The brands  
are listed in alphabetical order with the most popular  
codes listed first. You will use one of these codes to  
program your Cinema 7 to operate your Receiver/Tuner.  
To program the Cinema 7 to operate your Receiver/Tuner:  
Remember, if you want to use your Cinema 7 to operate  
your Cable Converter or Satellite, press the CABLE/SAT  
key first.  
RCVR + MAGIC* + Cable/DBS code  
The EXIT key exits or clears your on-screen  
menus. The EXIT key also controls the  
following functions in other modes: RCVR,  
AUX and CD mode = Open/Close.  
AUX to TV  
MAGIC* + 992 + TV + AUX + AUX +  
MAGIC* + TV code  
Programming the Cinema 7 to operate your VCR:  
Locate the brand name of your VCR and then write it in  
the space below.  
For the third digit, press 3 and count the  
number of times the red light (LED) blinks on  
the Cinema 7. If the light does not blink when  
you press the number 3, the digit is zero.  
VOL  
The VOLL (Volume Up), VOLL (Volume  
EXIT  
AUX to VCR  
AUX to DVD/LD  
AUX to CD  
MAGIC* + 992 + VCR + AUX + AUX +  
MAGIC* + VCR code  
Down) and MUTE keys control the volume the  
Programming the AUX Key:  
VOL  
same as the Volume Up and Down and Mute  
keys on your original remote.  
The AUX key is already set up to accept codes for a  
second Receiver/Tuner, Amplifier or other audio compo-  
nent. If you would like to set up the AUX key for an audio  
component, follow the instructions listed below. If you  
would like the AUX key to control a second TV, VCR,  
Cable Converter or other component, follow the instruc-  
tions in the “Re-assigning Device Keys” section to re-  
assign the AUX key to accept codes for other components.  
For example, if you are setting up an Amplifier:  
Locate the brand name of your Amplifier and then write it  
in the space below.  
VCR Brand:  
MAGIC* + 992 + DVD/LD + AUX + AUX  
+ MAGIC* + DVD or LD Player code  
MAGIC* + 992 + CD + AUX + AUX +  
MAGIC* + CD Player code  
MUTE  
1.  
Turn on your Receiver/Tuner.  
The PROG/GUIDE key operates your  
components secondary menus as well as your  
DBS system’s and Cable Converter’s Guide  
function. Use the  
For the fourth and final digit, press 4 and count  
the number of times the red light (LED) blinks  
on the Cinema 7. If the light does not blink  
when you press the number 4, the digit is zero.  
Now you have your four-digit code.  
Locate the brand name of your VCR in the “Setup Codes  
For VCRs” section. The brands are listed in alphabetical  
order with the most popular codes listed first. You will use  
one of these codes to program your Cinema 7 to operate  
your VCR.  
PROG/GUIDE  
2.  
Press RCVR and release. Press and hold  
MAGIC until the Cinema 7’s red light blinks  
twice, then release MAGIC.  
RCVR  
MAGIC  
The CHLL(Channel Up) and CHL (Channel  
CH  
Down) keys change channels the same as the  
AUX to CBL/SAT MAGIC* + 992 + VCR + AUX + AUX +  
Channel Up and Down keys on your original  
CH  
,
, LL, and L (Menu Up, Down, Left and  
MAGIC* + Cable/DBS code  
remote. The CHL/L keys also control the  
following functions in other modes: DVD/LD  
mode = Skip Forward/ Skip Reverse, RCVR,  
AUX and CD mode = Preset Up/Preset Down.  
Right) keys to navigate your menus. If your  
original remote control had a SELECT key to  
select options in your menus, use SEL. Use  
the EXIT key to exit/clear your On-Screen  
menus. Please consult your home entertain-  
ment component’s original owner’s manual for  
more detailed instructions on accessing and  
navigating your On-Screen menus.  
CD to TV  
MAGIC* + 992 + TV + CD + CD +  
MAGIC* + TV code  
3.  
4.  
Enter the first four-digit Receiver/Tuner code  
listed for your brand in the “Setup Codes For  
Receivers/Tuners” section. If you perform this  
procedure correctly, the red light will blink twice  
when you enter the final digit of your code.  
To program the Cinema 7 to operate your VCR:  
NOTE: To find out the code for your other components,  
repeat Steps 1 through 6, only substitute the  
appropriate device key (VCR, DVD/LD, RCVR,  
AUX, CD or CABLE/SAT) for the component  
code you wish to learn.  
1.  
Turn on your VCR and insert a tape.  
CD to VCR  
MAGIC* + 992 + VCR + CD + CD +  
MAGIC* + VCR code  
2.  
Press VCR and release. Press and hold  
MAGIC until the Cinema 7’s red light  
blinks twice, then release MAGIC.  
VCR  
CD to DVD/LD  
CD to RCVR  
CD to AUX  
MAGIC* + 992 + DVD/LD + CD + CD  
+ MAGIC* + DVD or LD Player code  
MAGIC* + 992 + RCVR + CD + CD +  
MAGIC* + Audio code  
The Digit keys (0-9) control direct channel  
0 - 9  
Amplifier Brand:  
SEL  
EXIT  
access the same as the Digit keys on your  
original remote. The Digit keys (0-9) also  
control the following functions in other modes:  
RCVR and AUX modes = Input Selections.  
MAGIC  
POWER  
Aim the Cinema 7 at your Receiver/Tuner and  
press POWER. Your Receiver/Tuner should  
turn off. If your Receiver/Tuner does not  
respond, repeat steps 2-4, trying each code  
listed for your brand until you find the one that  
operates your Receiver/Tuner.  
Locate the brand name of your Amplifier in the “Setup  
Codes For Amplifiers” section. The brands are listed in  
alphabetical order with the most popular codes listed first.  
You will use one of these codes to program your Cinema 7  
to operate your Amplifier.  
SETTING UP OTHER COMPONENTS  
3.  
4.  
Enter the first four-digit VCR code listed for  
your brand in the “Setup Codes For VCRs”  
section. If you perform this procedure correctly,  
the red light will blink twice when you enter the  
final digit of your code.  
MAGIC* + 992 + AUX + CD + CD +  
MAGIC* + Audio code  
MAGIC* + 992 + CBL/SAT + CD + CD  
The DISPLAY key operates the Display  
function of your home entertainment  
components.  
In addition to the components labeled on the device keys  
(TV, VCR, DVD/LD, CBL/SAT, etc.), the Cinema 7 can also  
operate the following components: Cassette Decks,  
Infrared Home Automation, Video Accessories and  
Miscellaneous Audio Components (Graphic Equalizers  
and Digital Music Service Boxes).  
CD to CBL/SAT  
CBL/SAT to TV  
The ENTER key operates the same as the  
DISPLAY  
+ MAGIC* + Cable/DBS  
code  
Enter key on your original remote. If your  
original remote control required you to use an  
To program the Cinema 7 to operate your Amplifier:  
ENTER  
MAGIC* + 992 + TV + CBL/SAT +  
The PIP On/Off key accesses your TV’s  
Picture-in-Picture feature. The PIP On/Off key  
also controls the following functions in other  
modes: CD mode =Disk Skip, DVD/LD mode =  
Subtitle On/Off, CBL/SAT mode = View.  
5.  
Your Cinema 7 is now programmed to operate  
your Receiver/Tuner. Write your Receiver/  
Tuner code in the boxes to the left for future  
reference.  
1.  
Turn on your Amplifier.  
CBL/SAT + MAGIC* + TV code  
POWER Aim the Cinema 7 at your VCR and press  
POWER. Your VCR should turn off. If your original  
VCR remote control did not have a POWER key,  
press PL (Play). Your VCR should start to play. If  
your VCR does not respond, repeat steps 2-4,  
trying each code listed for your brand until you  
find the one that operates your VCR.  
Enter key to change channels, use the ENTER  
key on the Cinema 7 after entering your  
channel number. The ENTER key also controls  
the following functions in other modes: RCVR  
and AUX modes = TAPE MON.  
P
I
P
CBL/SAT to VCR MAGIC* + 992 + VCR + CBL/SAT +  
CBL/SAT + MAGIC* + VCR code  
CBL/SAT to DVD/LD MAGIC* + 992 + DVD/LD + CBL/SAT  
+ CBL/SAT + MAGIC* + DVD or LD  
AUX  
2.  
Press AUX and release. Press and hold  
MAGIC until the Cinema 7’s red light  
blinks twice, then release MAGIC.  
or  
The Setup Codes for these components can be accessed  
under the following device keys:  
MAGIC  
PL  
Cassette Decks:  
Use the VCR Key  
Remember, if you want to use your Cinema 7 to operate  
your Receiver/Tuner, press the RCVR key first.  
The SWAP key swaps the Picture-in-Picture  
window and the TV’s main picture. The SWAP  
key also controls the following functions in  
other modes: CBL/SAT mode = SAT.  
Swap  
Move  
3.  
4.  
Enter the first four-digit Amplifier code listed for  
your brand in the “Setup Codes For Amplifiers”  
section. If you perform this procedure correctly,  
the red light will blink twice when you enter the  
final digit of your code.  
code  
IR Home Automation:  
Video Accessories:  
Miscellaneous Audio:  
Use the CD Key  
CBL/SAT to RCVR MAGIC* + 992 + RCVR + CBL/SAT +  
CBL/SAT + MAGIC* + Audio code  
Use the CBL/SAT Key  
Use the AUX or RCVR Key  
Programming the Cinema 7 to operate your CD Player:  
Locate the brand name of your CD Player and then write  
it in the space below.  
5.  
Your Cinema 7 is now programmed to operate  
your VCR. Write your VCR code in the boxes to  
the left for future reference.  
CBL/SAT to AUX MAGIC* + 992 + AUX + CBL/SAT +  
CBL/SAT + MAGIC* + Audio code  
For example, to set up a Cassette Player on the VCR key:  
1.  
Turn on your Cassette Player and insert a tape.  
The MOVE PIP key moves the Picture-in-  
Picture window around your TV screen. The  
MOVE PIP key also controls the following  
CBL/SAT to CD  
MAGIC* + 992 + CD + CBL/SAT +  
CBL/SAT + MAGIC* + CD Player code  
POWER  
Aim the Cinema 7 at your Amplifier and press  
POWER. Your Amplifier should turn off. If your  
VCR  
CD Player Brand:  
2.  
Press VCR and release. Press and hold  
MAGIC until the Cinema 7’s red light blinks  
twice, then release MAGIC.  
MAGIC  
*NOTE: Here (*) you must hold MAGIC until the Cinema  
7’s red light blinks twice.  
 
ONE FOR ALL® PRODUCTS  
90-DAY Limited Warranty  
1.  
2.  
Press and release the CBL/SAT key then press  
the SLEEP key once to set the Cinema 7’s built-  
in sleep timer for 15 minutes. The red light will  
blink once.  
Janeil  
JBL  
0046  
Scimitsu  
Scotch  
Scott  
0019  
0045  
0020  
0042  
Quartz  
Quasar  
0046  
0162, 0035,  
0077, 0454  
MGA  
Mitsubishi 0048*  
Orion 0002, 0294,  
0479  
0240  
Denon  
DKK  
Emerson  
Fisher  
0003  
DBS  
0790  
0082  
CABLE/SAT  
SLEEP  
Oak  
0007, 0019  
0021  
0054  
0178  
Daytron  
Denon  
0000  
Toshiba  
PROGRAMMING THE MACRO KEYS  
Optimus  
®
JCB  
0000  
0236, 0019,  
0178, 0179,  
0180  
0047, 0054,  
0056, 0154,  
0156, 0171,  
0178, 0159,  
0179  
0180  
0156  
0093, 0165,  
0039, 0386  
0019  
0305  
0048, 0174,  
0179  
0393, 0420  
0032, 0305  
Uniden DBS 0724  
Uniden  
One For All warrants, to the original purchaser only, that this  
product will be free from defects in materials and workmanship,  
under normal use, for ninety (90) days from the date of original  
purchase.  
Panasonic 0021, 0107,  
0000  
Panther  
Paragon  
Philips  
The Cinema 7 has two Macro keys (MACRO and MACRO2)  
that allow the user to play back a series of keystrokes, at  
any time, with the press of one key. For example, to set up a  
sequence that will turn on your components and change the  
components to the proper inputs:  
JVC  
Kaypani  
KEC  
Kenwood  
Kloss  
KTV  
0053  
Dynatech 0000  
Electrohome0037  
Electrophonic 0037  
RadioShack 0000, 0037  
0052, 0074,  
0076, 0238  
SLEEP  
Each additional press of the SLEEP key will add  
15 more minutes to the Sleep Timer, up to a  
maximum of 60 minutes. The LED will blink  
twice when the sleep timer is set for 30 minutes,  
3 times for 40 minutes, or 4 times for 60  
minutes.  
0052  
Radix  
Randex  
RCA  
0037  
0037  
Panasonic 0035*, 0162*  
0637  
0000  
0153, 0025,  
0027, 0031  
0753, 0144,  
0023  
0180  
Sears  
Penney’s  
0035*, 0240,  
0162*  
Garrard  
Genexxa  
Harman/Kardon0173  
Hitachi  
JVC  
Kenwood  
Setup Codes For  
Amplifiers  
0019, 0030  
0024, 0046  
0030, 0180,  
0185, 0280,  
0032  
Emerex  
Emerson  
0032  
0060, 0202,  
0240, 0042,  
0035, 0048,  
0077, 0105,  
0106, 0149  
0000, 0035,  
0037, 0046,  
0047, 0048,  
0062, 0066,  
0104  
0209, 0184,  
0479, 0278,  
0000, 0002,  
0036, 0037,  
0043, 0061,  
0068, 0121,  
0184, 0208,  
0212, 0295,  
0361  
Quasar  
RCA  
0035*, 0162*  
0035*, 0060*,  
0048*  
Carver  
Denon  
GE  
0269  
0160  
0078  
0331  
0356  
0269  
0165  
®
This limited warranty is valid only on ONE FOR ALL product  
1.  
Press and hold MAGIC until the Cinema 7’s  
red light blinks twice, then release  
MAGIC.  
MAGIC  
0032  
0072  
0028, 0037,  
0048, 0190  
0157  
0157  
0305  
Pioneer  
Popular  
Mechanics 0400  
Prelude  
Pulsar  
RadioShack 0015, 0315,  
0797  
RCA  
purchased and used in the United States of America or Canada,  
and does not apply to products used for industrial or commercial  
purpose.  
Semivox  
Semp  
Sharp  
Sansui  
Sanyo  
Sears  
Sony  
0000, 0479  
0240  
0000, 0037  
0032*  
JVC  
NOTE: The sleep timer starts 10 seconds after the last  
press of the SLEEP key. Once you have activated the  
Cinema 7’s built-in sleep timer, you must keep the remote  
control aimed directly at the component.  
LG  
0056  
Realistic  
Kenwood  
Linn  
2.  
3.  
Press 9 - 9 - 5. The Cinema 7’s red light will  
9 -9 -5  
Logik  
Luxman  
LXI  
0016  
Krell  
Linn  
LXI  
0770  
0000  
blink twice.  
The limited warranty does not cover damage or failure caused by  
products or services not supplied by ONE FOR ALL , or which  
result from accident, misuse, abuse, neglect, mishandling, mis-  
application, faulty installation, set-up adjustment, improper main-  
tenance, alteration, maladjustment of consumer controls, modifi-  
cations, commercial use, or that is attributable to acts of God.  
0056  
Luxman  
®
0047, 0054,  
0154, 0156,  
0178  
Shogun  
Signature 0016  
Simpson  
Sony  
Soundesign 0178, 0179,  
0180, 0186  
Spectricon 0003  
Squareview 0171  
SSS  
Starlite  
Symphonic 0000  
Zenith 0000  
Setup Codes for DVD  
Players  
Magnavox 0269  
Press and release one of the MACRO keys.  
This will be the key that will play back the  
series of keystrokes assigned to that key.  
MACRO  
POWER  
3.  
To de-activate the built-in sleep timer, press  
POWER.  
Magnavox 0157, 0305  
Marantz  
Marantz  
0269, 0321  
or  
0186, 0187  
0000, 0080  
Fisher  
0104, 0047,  
0054, 0066  
0033, 0035  
0000  
Ricoh  
Runco  
Samsung 0240, 0045  
Sanky  
Sansui  
0034, 0253  
0039  
0029, 0157,  
0180  
Nakamichi 0321  
MACRO 2  
0021  
Magnavox 0054, 0096,  
0186, 0187,  
NEC  
Optimus  
0264  
0013, 0300,  
0395  
0269  
0013, 0300  
0395  
0321  
0264  
0220, 0689  
NOTE: Plugging your TV into the outlet on the back of the  
Cable Converter may allow you to turn both your Cable  
Converter and your TV ON and OFF.  
Realistic  
Recoton  
Regal  
0207  
Fuji  
JVC  
Kenwood  
0558  
0534  
MCS  
Mission  
MTC  
Nikko  
NSM  
Onkyo  
Optimus  
0029  
4.  
5.  
Begin entering the sequence of keystrokes, up  
to 15, that you wish to be played back when  
you press the MACRO key. For example:  
0400  
0020, 0024,  
Funai  
Garrard  
GE  
0048, 0039  
0000, 0041,  
0067, 0271,  
0479  
0104, 0046,  
0047, 0054,  
0240  
0043, 0045,  
0121, 0184,  
0210, 0212  
0000, 0035,  
0037, 0042,  
0046, 0047,  
0054, 0066,  
0104, 0105  
0045  
0157  
0259, 0020  
0002  
0030, 0386  
0000  
Mitsubishi 0521  
Panasonic 0490  
0420  
Philips  
Pioneer  
Realistic  
Sansui  
Shure  
Regency  
There are no express warranties except as listed above. ONE  
FORALL® SHALLNOT BE LIABLE FOR INCIDENTALOR CON-  
SEQUENTIAL DAMAGES RESULTING FROM THE USE OF  
THIS PRODUCT ORARISING OUT OFANY BREACH OF WAR-  
RANTY. ALLEXPRESSAND IMPLIED WARRANTIES, INCLUD-  
ING THE WARRANTIES OF MERCHANTABILITYAND FITNESS  
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WAR-  
RANTY PERIOD SET FORTH ABOVE. Some states do not allow  
the exclusion or limitation of incidental or consequential damages,  
or limitations on how long an implied warranty lasts, so the above  
exclusions or limitations may not apply to you. This warranty gives  
you specific legal rights and you may also have other rights which  
vary from state to state.  
Majestic  
Marantz  
Matsushita 0250  
Megatron 0145, 0003,  
0178  
MEI  
Memorex  
0016  
0060, 0202,  
0035, 0048,  
0240  
0174  
Rembrandt 0011  
RCVR + POWER + TV + POWER + TV/VCR  
(To change the input on the TV to VIDEO 1) +  
CBL/SAT + POWER.  
0054, 0030  
0019, 0180  
0180  
Philips  
Pioneer  
RCA  
0539  
0525  
0522  
0533  
0503  
0503  
0157  
TROUBLE SHOOTING  
Runco  
0000  
Sanyo  
Scott  
0101  
Samsung 0144, 0040  
Scientific  
Problem  
Solution  
Supre-Macy 0046  
Supreme  
Sylvania  
Goldstar  
0037, 0038  
0000, 0032,  
0037, 0048,  
0145, 0179,  
0305, 0420,  
0437, 0468  
0000  
0054, 0096,  
0020, 0030  
Go-Video 0432, 0526  
Gradiente 0000, 0008  
Harley  
Sony  
Sony  
Atlanta  
0477, 0008,  
0017  
0510  
0015, 0040  
Red light does not  
blink when you press (4) new AAA alkaline batteries.  
a key?  
Replace the batteries with four  
Once your sequence is entered, press and  
hold MAGIC until the Cinema 7’s red light  
blinks twice.  
0185  
Toshiba  
Zenith  
Soundesign 0078, 0211  
MAGIC  
0056, 0150,  
0154, 0016,  
0178  
Technics  
Victor  
Wards  
0308  
0331  
0013, 0078,  
0211  
0133, 0143,  
0354, 0504  
Seam  
Signal  
Signature 0011  
SL Marx  
Sprucer  
Starcom  
Stargate  
Symphonic 0171  
Tandy  
Tatung  
Technics  
Davidson 0000  
Setup Codes for Laser  
Disc Players  
Mitsubishi 0059  
0093  
0055, 0003  
0250, 0051  
Harman/Kardon  
0038  
0072, 0068,  
0072  
Sears  
Panasonic 0029  
Philips  
Pioneer  
Now, using the example above, whenever the programmed  
MACRO key is pressed, the Receiver would power ON, the  
TV will power ON and change the input to VIDEO 1 and  
then the Satellite would power ON.  
Repeat steps 1 - 5 to then setup a second sequence on  
the MACRO2 key.  
The Cinema 7 does  
not operate your  
home entertainment  
components or is not section. Many setup codes may  
performing com-  
mands properly?  
Try all of the codes listed for your  
brand of home entertainment  
component in the “Setup Codes”  
MGA  
0150, 0019,  
0030, 0178  
0017, 0047,  
0051, 0135,  
0032, 0039  
0021  
Harwood  
0157  
0040  
0021  
0003, 0015  
0770, 0015,  
0040  
NAD  
Pioneer  
Sony  
0059  
0032, 0468,  
0244, 0305  
0157  
Yamaha  
Midland  
Technol Ace 0179  
Techwood 0051, 0056,  
0003  
Headquarter 0046  
0059  
allow for partial functionality,  
however, only one setup code  
will operate your home entertain-  
ment component correctly. Make  
sure that all of the compo-  
nents you are setting up can  
be operated with an infrared  
remote control.  
HI-Q  
Hitachi  
0047  
0193, 0201  
Proton  
QED  
Quasar  
RCA  
Setup Codes For Audio  
Cassette Decks  
Aiwa  
Carver  
Denon  
Harman/Kardon 0182  
JVC  
Kenwood  
Magnavox 0029  
Marantz  
Onkyo  
Optimus  
Philips  
Pioneer  
0041, 0105,  
0000, 0042  
0041  
Semp  
Setup Codes For  
Receivers/Tuners  
0157  
0029  
Minutz  
Mitsubishi 0150, 0093,  
0019, 0178  
Motorola  
MTC  
Teknika  
0054, 0056,  
0060, 0092,  
0150, 0016,  
0019, 0179,  
0180, 0186,  
0039  
Sharp  
Shintom  
Shogun  
Singer  
Sony  
0048, 0062  
0072  
0240  
0072  
0029, 0197  
0029  
0076  
Starquest 0015  
Sylvania  
Tandy  
Teleview  
Texscan  
TFC  
Timeless  
Tocom  
Toshiba  
Tusa  
TV86  
Unika  
To obtain warranty service for a defective product during the war-  
ranty period, please return the product, preferably in the original  
carton, along with your purchase receipt, to the store of original  
purchase. A note detailing the complaint would be helpful. The  
store, at its option, will replace or repair this product if found to be  
defective.  
VOLUME LOCK  
Jensen  
JVC  
ADC  
Aiwa  
0531  
0121, 0158,  
0189  
0764, 0053,  
0179, 0305  
0179, 0180,  
0420  
0157, 0420  
0157  
0157, 0305  
0179  
0305  
0305  
0037, 0180  
0001  
0008, 0041,  
0067  
0258  
Volume Lock allows the user to designate which compo-  
nent will control the volume in the TV, DVD/LD and CBL/  
SAT modes. To set the Volume Lock to the TV mode:  
0093, 0055  
0060, 0019,  
0030, 0056,  
0185  
0180  
0156, 0166,  
0178  
Realistic  
0040  
KEC  
Kenwood  
0037, 0278  
0038, 0041,  
0067  
0032, 0033,  
0034, 0000,  
0035, 0253  
0042  
Capetronic 0531  
Carver  
0244, 0273  
0070  
0001  
0008, 0042,  
Rotel  
SAE  
Sansui  
Sanyo  
Scott  
Sears  
Sharp  
0310  
1.  
Press and hold MAGIC until the Cinema 7’s  
red light blinks twice, then release  
MAGIC.  
MAGIC  
Telefunken 0056  
TMK  
0189, 0360  
0195  
The Cinema 7 is  
not performing  
Try all of the codes listed for your  
brand of home entertainment  
0418  
Multitech  
NAD  
0056, 0177,  
0178  
0156, 0060,  
0154  
0185  
KLH  
0072  
STS  
Sunpak  
Sylvania  
Casio  
0029  
0012, 0013  
0000  
One For All  
(330) 405-8655  
commands properly? component in the “Set-Up  
Codes” section. Many set-up  
codes may allow some degree of  
operation. However, only one  
set-up code will work correctly  
with your home entertainment  
component.  
Kodak  
Lloyd’s  
Logik  
LXI  
0035, 0037  
0000, 0208  
0072  
0253  
Clarinette 0195  
0135, 0282  
0027, 0220  
0029  
Toshiba  
Tosonic  
Totevision 0039  
Universal  
Vector  
0035, 0081,  
0043, 0000,  
0110  
Denon  
Emerson  
Fisher  
0004  
0424  
0042, 0219,  
0360  
0424, 0463  
0015  
0063  
0153, 0022,  
0207  
2.  
Press 9 - 9 - 3. The Cinema 7’s red light will  
blink twice.  
9 -9 -3  
NEC  
0019, 0030,  
0056  
One For All® is the registered trademark of Universal  
Electronics Inc. Computime International LTD. is the Licensee  
of the ONE FOR ALL® brand for the United States of America  
and Canada.  
0037  
0027, 0099,  
0220  
0029  
Nikko  
0030, 0092,  
0178  
Magnasonic 0278  
Magnavox 0035, 0081,  
0000, 0039,  
Symphonic 0000  
Tatung  
TEAC  
Technics  
Teknika  
Sherwood 0180  
3.  
Press and release TV. The Cinema 7’s red light  
will blink twice.  
TV  
0027  
0041  
Garrard  
Sony  
0000, 0185  
Sansui  
Sony  
United  
Artists  
United  
Cable  
Universal  
Noshi  
NTC  
Onwa  
Optimus  
0018  
0000, 0041  
0162, 0035  
0000, 0035,  
0037  
Harman/Kardon0110  
Soundesign 0145  
0170, 0243,  
0291  
0007  
0092  
Research 0030  
Victor  
0110, 0149  
0240  
0035, 0081  
0037  
JVC  
Kenwood  
0074  
Tascam  
TEAC  
0420  
Now, whenever you press VOLL, VOLL or MUTE in the  
VCR, DVD/LD and CBL/SAT modes your TV will control  
the volume. If you would like to change the Volume Lock  
setting to the VCR, DVD/LD or CBL/SAT modes repeat  
steps 1-3, only substitute the appropriate device key.  
Setting the Volume Lock to the TV, VCR, DVD/LD or CBL/  
SAT mode will not effect the volume control in the RCVR,  
AUX and CD mode.  
You can also change the Volume Lock setting so that an  
Audio component controls the volume in all device modes.  
To change the Volume Lock setting on the Cinema 7 to the  
RCVR or AUX mode:  
Problems program-  
ming a TV/VCR  
combo?  
Try the VCR set-up codes for  
your brand. However, some  
combo units may require both a  
TV code for volume control and  
a VCR code for the remaining  
functions.  
0180  
0053  
0054  
0019, 0178  
0046  
0016, 0019,  
0030, 0054,  
0056, 0080,  
0096, 0165,  
0178, 0179,  
0020, 0021,  
0027  
Magnin  
Marantz  
Marta  
0027, 0313,  
0314, 0077,  
0186  
0174, 0180,  
0393, 0420  
0029  
Technics  
Victor  
Wards  
Yamaha  
0229  
0003  
Copyright 2000 by Universal Electronics Inc. No part of this  
publication may be reproduced, transmitted, transcribed, stored  
in any retrieval system, or translated to any language, in any  
form or by any means, electronic, mechanical, magnetic, optical,  
manual, or otherwise, without the prior written permission of Uni-  
versal Electronics Inc.  
0250, 0154,  
0166  
Vidikron  
Vidtech  
Viking  
0273  
0153, 0022,  
0056, 0191,  
0207  
Thomas  
TMK  
0000  
0240, 0036,  
0208  
0043, 0045,  
0066, 0210,  
0212  
Technics  
Victor  
Wards  
Yamaha  
Yorx  
Setup Codes for Cable  
Converters  
ABC  
0027  
Optonica  
Orion  
Panasonic 0250, 0051,  
0055  
Penney  
0093, 0165  
0236, 0436  
Matsushita 0162, 0035,  
0454  
Koss  
Linn  
Lloyd’s  
LXI  
0424  
0072  
0157  
0036, 0187  
0461  
0094, 0097  
Wards  
0189  
Setup Codes For IR  
Home Automation  
Videoway 0250  
Viewstar  
MEI  
Memorex  
0035  
Toshiba  
0195  
0063, 0027,  
0258  
0525, 0000  
0400  
VCR not recording?  
As a safety feature on the  
Cinema 7, you must press the  
REC key twice.  
0162, 0240,  
0035, 0037,  
0104, 0000,  
0039, 0046,  
0047, 0048  
0043, 0061,  
0240  
0181  
GE  
0240  
0047, 0156,  
0051, 0030,  
0019, 0003,  
0018, 0021,  
0027, 0060,  
0135, 0178,  
0032, 0039  
0054, 0145,  
0096, 0019,  
0020, 0030  
0054  
0019, 0030,  
0039  
0166, 0038  
0092, 0019,  
0039  
0051  
0047  
0003, 0052,  
0178  
0017, 0019  
0250, 0051,  
0055, 0165  
Magnavox 0189, 0195,  
0531  
LiteTouch 0084  
Zenith  
Zentek  
Setup Codes for  
Satellites  
AlphaStar  
DBS  
Chaparral 0053, 0216  
Echostar  
One For All is designed for compatibility in North America  
excluding Mexico.  
Totevision 0037, 0240  
Unitech 0240  
Vector Research  
0038, 0040  
Vector 0045  
Video Concepts0040,  
0045, 0061  
Lutron  
0318, 0597  
Marantz  
MCS  
0039, 0189  
0039  
0003, 0008,  
0014, 0007,  
0001, 0011,  
0013, 0017  
0153, 0315  
0022, 0207  
0797, 0153,  
0022, 0207  
0056  
One For All 0167  
RadioShack 0240  
Security System  
0167  
CH L/L and PREV  
CH not working for  
your RCA TV?  
Due to RCA design (1983-1987),  
only the original remote control  
will operate these functions.  
1.  
Press and hold MAGIC until the Cinema 7’s  
red light blinks twice, then release  
MAGIC.  
MAGIC  
White  
MGA  
MGN  
Modulaire 0195  
NAD 0320  
Nakamichi 0347  
URC-7200 Cinerma 7  
01/01  
Westinghouse0451, 0463,  
0236, 0180  
0772  
Problems changing  
channels?  
If your original remote control  
required an Enter keystroke  
when changing channels, press  
the ENTER key on the Cinema 7  
after you enter the channel  
number.  
Setup Codes For TVs  
Allegro  
Antronix  
Archer  
Universal X10 0167  
X10  
Setup Codes For Video  
Accessories  
Archer  
GC Electronics 0160  
Jebsee  
Rabbit  
RadioShack 0160  
Roctec 0456  
SuperGuide 0169  
TeleCaption 0171  
Setup Codes For  
Miscellaneous Audio  
Aiwa  
Fisher  
Harman/Kardon0477  
Jerrold  
JVC  
Nikko  
Paramount  
Pictures  
RCA  
Schneider 0376  
Scientific  
Atlanta  
Sony  
Soundesign 0376  
SSI  
Abex  
0032  
Curtis  
Philco  
Yamaha  
Zenith  
0019, 0030  
0017, 0092,  
0016  
Technology 0240  
Onkyo  
0135  
0167  
9 -9 -3  
2.  
Press 9 - 9 - 3. The Cinema 7’s red light will  
blink twice.  
Admiral  
0093, 0179,  
0180, 0016,  
0047  
Mathes  
0030, 0060,  
0154, 0039  
0180  
0451, 0092,  
0019, 0039  
0019  
Minolta  
0042, 0105  
Videosonic 0240  
Wards  
Optimus  
0042, 0080,  
0177, 0181,  
0186, 0219,  
0531, 0670  
DBS  
Echostar  
0775  
0159, 0269,  
0280  
Mitsubishi 0043, 0048,  
0061, 0067  
0000, 0035,  
0042, 0047,  
0048, 0060,  
0062, 0072,  
0081, 0149,  
0212, 0240  
RCVR  
or  
CXC  
Daewoo  
Philips  
Pilot  
Zonda  
0003  
Belcor  
0160  
3.  
Press and release RCVR or AUX. The Cinema  
7’s red light will blink twice.  
Adventura 0046  
Setup Codes For VCRs  
Motorola  
MTC  
Multitech  
NEC  
0035, 0048  
0240, 0000  
0000, 0072  
0038, 0040,  
0041, 0067,  
0104  
Cable Star 0056  
Cabletenna 0022  
Cableview 0022  
Express  
Vu DBS  
General  
Instrument 0361  
Hitachi DBS 0819  
Homecable 0238  
HTS DBS 0775  
Hughes  
AUX  
Aiko  
Akai  
Alaron  
A-Mark  
0092  
0030  
0179  
0003  
The red light blinks  
when you press a  
key but you receive  
no response from  
your home entertain- using your remote.  
ment component?  
Make sure you are aiming your  
Cinema 7 at your home enter-  
tainment component and that  
you are within 15 feet before  
Admiral  
0048, 0121,  
0184, 0039,  
0060, 0202  
Panasonic 0039  
0160  
0081  
0775  
Now, whenever you press VOLL, VOLL or MUTE your  
Audio component will control the volume in all device  
modes.  
Daytron  
Denon  
Dumont  
Electroband 0000, 0185  
Emerson  
Pioneer  
Portland  
Penney  
Philips  
Pioneer  
0195  
0189  
0014, 0080,  
0150, 0531,  
0630  
0039  
0054, 0360,  
0531  
0163, 0181,  
0195  
0189  
0219  
0163, 0322  
0186  
0145  
Century  
Citizen  
Colour Voice0025, 0031  
Comtronics 0040  
0153  
0153, 0315  
0017, 0019  
Adventura 0000  
White  
Ambassador0177  
Anam  
You can also change the Volume Lock setting so that each  
component controls its own volume. However, some  
components do not have volume control. Using this setting  
may eliminate volume control in some device modes. To  
change the Volume Lock setting on the Cinema 7 so each  
mode controls its own volume:  
Prism  
Proscan  
Proton  
Aiko  
Aiwa  
Akai  
0278  
Westinghouse0278,  
0479, 0209,  
0184  
0463, 0236,  
0180, 0019,  
0154, 0177,  
0178, 0179,  
0185, 0280,  
0282, 0038,  
0039  
0037, 0000  
0041, 0061,  
0106  
Nikko  
Nikon  
Noblex  
Olympus  
Optimus  
0037  
National 0055  
0034, 0253  
0240  
Quasar  
RCA  
Contec  
Digi  
Eastern  
Emerson  
0019  
0637  
0002  
0797  
Anam  
AOC  
0180  
XR-1000  
0000, 0035,  
0072  
0038  
0039, 0000,  
0033, 0034  
Network  
Systems  
DBS  
IQ Prism  
IQ  
Janeil  
Jerrold  
Consumer Help Line: 1-330-405-8601  
0030, 0019,  
0185, 0003,  
0052  
Pulsar  
Quasar  
American  
High  
Asha  
Audiovox  
Beaumark 0240  
Bell &  
Howell  
Broksonic 0184, 0209,  
0479, 0002,  
0035  
0010, 0159  
0052  
0035  
0240  
0037  
0162, 0048,  
0037, 0104,  
0454  
Yamaha  
Zenith  
Realistic  
0749  
0210  
0210  
0152  
1.  
Press and hold MAGIC until the Cinema 7’s  
red light blinks twice, then release  
MAGIC.  
MAGIC  
Everquest 0015, 0040  
Archer  
0003  
World Wide Web: www.oneforall.com  
RadioShack 0047, 0056,  
0154, 0019,  
Sansui  
Sanyo  
Scott  
Focus  
Garrard  
GC  
0400  
0153  
0459, 0520  
0073  
0376  
Audiovox  
0451, 0092,  
0180, 0003  
0180  
Envision  
Fisher  
Fujitsu  
Funai  
0030  
Optonica  
Orion  
0062  
Setup Codes For TV/  
VCR Combos  
American  
0154, 0159  
0179  
0171, 0179,  
0180  
0030, 0165,  
0209, 0184,  
0479, 0002,  
0295  
2.  
3.  
Press 9 - 9 - 3. The Cinema 7’s red light will  
9 -9 -3  
Baysonic  
Belcor  
0178, 0180,  
0104  
Sharp  
Electronics 0056, 0207  
Gemini  
General  
Primestar 0627  
blink twice.  
0019  
0032, 0039  
High  
0035*  
Sherwood 0491, 0502  
0015  
0317  
0056  
Jerrold  
Legend  
Magnavox  
DBS  
Memorex  
DBS  
Memorex  
0361  
0269  
Bell &  
Howell  
Bradford  
RCA  
0047, 0018,  
0019, 0038,  
0090, 0135  
0056, 0154,  
0019, 0030,  
0165, 0178,  
0180, 0032,  
0039  
Panasonic 0162, 0035,  
0077, 0225,  
Brocksonic 0002, 0294,  
0479  
Sony  
0158, 0474  
Press and release VOLL. The Cinema 7’s red  
light will blink twice.  
VOL  
0154, 0016  
0180  
Futuretech 0180  
GE  
0121, 0295,  
Soundesign 0670  
Instrument 0476, 0003,  
0014, 0011  
0047, 0051,  
0361  
0454  
Colt  
0072  
TEAC  
Technics  
0163, 0463  
0722, 0724  
Now, whenever you press VOLL, VOLL or MUTE on the  
Cinema 7 each component will control its own volume,  
provided each component has volume control.  
Brockwood 0019  
Broksonic 0003  
0451, 0021,  
0027, 0055,  
0178, 0282,  
0135  
Realistic  
Calix  
0037  
Penney  
0035, 0037,  
0038, 0040,  
0042, 0054,  
0240  
Curtis Mathes 0035*  
0039, 0309,  
0518  
Goldstar  
0144, 0040  
0460  
0010, 0159  
Canon  
Capehart  
Carver  
CCE  
0035  
Daewoo  
Emerson  
0278*  
Goodmind 0797  
0724  
0269  
Candle  
0056, 0030,  
0186, 0046  
0020  
0002, 0294,  
0479  
Victor  
Wards  
0074  
Hamlin  
0259, 0009,  
0081  
0014, 0042,  
0054, 0080,  
0158, 0189  
0176, 0186  
0195  
0020, 0034  
0011  
0317  
0459  
0376  
Panasonic 0152  
Panasonic  
DBS  
USING THE SLEEP KEY  
Carnivale 0030  
Gibralter  
Goldstar  
0019, 0030,  
0017  
0019, 0030,  
0178, 0032,  
0039  
0072, 0278  
0278  
Pentax  
Philco  
0042, 0105  
0035, 0209,  
0479  
0035, 0081,  
0062, 0110  
0037  
0067, 0162  
0020  
0060, 0202  
0072  
Funai  
GE  
0000  
Hitachi  
Hytex  
Jasco  
Jerrold  
Starcom  
Yorx  
Carver  
Celebrity  
Cineral  
Citizen  
0054  
Rhapsody 0185  
Runco  
Sampo  
Cineral  
Citizen  
Colt  
0035*, 0060*,  
0048*, 0240  
0035*, 0000  
0000  
0007  
0701  
The SLEEP key allows you to access the sleep timer of  
your TV, Cable Converter/DBS Satellite or Audio compo-  
nent. You can access your TV, Cable Converter, DBS  
Satellite or Audio component’s Sleep Timer by pressing  
the SLEEP key. Most Sleep Timers advance in increments  
of 10 or 15 minutes, however, for specific instructions on  
setting your components Sleep Timer, please consult your  
original owners manual.  
Even if your original Cable Converter remote control did  
not have a sleep timer, your Cinema 7 has its own built-in  
sleep timer. If your Cable Converter does not have a sleep  
timer, press the SLEEP key to activate the Cinema 7s  
built-in sleep timer. For example:  
0000  
0017, 0030  
0030, 0052,  
0032, 0039  
0037, 0278  
0072  
0072, 0240,  
0037, 0047,  
0271  
Yamaha  
Yorx  
0153, 0315  
0476, 0003,  
0014, 0011,  
0012, 0015  
0440  
Philips DBS 0722, 0724  
Primestar 0361, 0627  
RCA DSS 0566  
0451, 0092  
0060, 0092,  
0030, 0056,  
0186, 0280,  
0039, 0046  
0185  
Philips  
Hitachi  
HQ  
Lloyds  
Magnavox 0000, 0035*,  
0081*  
Magnin  
Memorex  
Craig  
Setup Codes For CD  
Players  
Gradiente 0053, 0056  
Samsung 0060, 0019,  
0030, 0056,  
Pilot  
0000  
Realistic  
0052  
Grunpy  
Hallmark  
Harvard  
Hitachi  
0179, 0180  
0178  
Pioneer  
Portland  
Proscan  
Protec  
Pulsar  
Aiwa  
0124, 0157  
Linsay  
Sony DBS 0639  
Star Choice  
0178, 0032,  
Curtis  
Mathes  
Burmester 0420  
California  
Magnavox 0027  
Clairtone  
Concerto  
Contec  
Craig  
0180  
0039  
0035, 0041,  
0060, 0202  
0240  
0037, 0162*  
Memorex  
0000  
DBS  
0869  
0180  
0210  
0056  
0145, 0151,  
0038, 0056,  
0032  
Samsux  
Sansei  
Sanyo  
0039  
Audio Lab 0029  
Movie Time 0063, 0156  
Star Trak  
STS  
0180, 0185  
0180  
0451  
Cybernex 0240  
Daewoo 0278, 0020,  
0039  
0046  
Carver  
0157, 0179,  
0437  
Novaplex  
NSC  
0618  
0063, 0156  
0154, 0159  
Quarter  
Toshiba  
Crown  
0180, 0039  
Infinity  
0054  
 

Miele Clothes Dryer T1520 User Manual
Miele Cooktop CS1411 User Manual
Milwaukee Nail Gun 2458 20 User Manual
Moxa Technologies Network Card UC 7420 7410 User Manual
NEC Computer Monitor LA 1422JMW User Manual
NEC Projection Television PF32WT100 User Manual
NetComm Network Router NP740N User Manual
Oceanic Scuba Diving Equipment 45849 User Manual
Omega Vehicle Security Electric Heater OM5 C User Manual
Paradyne Network Hardware Broadband Services Switch User Manual