Omron Computer Accessories V530 R160E User Manual

2-Dimensional Code Reader (Fixed Type)  
V530-R160E, EP  
A Code Reader that Handles Pin-Stamped  
Markings!  
Features  
Dependably Read Pin-Stamped Markings  
Markings made by pin-stamping machines can be dependably  
read, providing the user with a wider range of selection of marking  
devices.  
Dependably Read Markings at an Angle  
With dependable reading at an angle, installation is possible even on  
existing facilities with space limitations.  
Stable reading is possible even if the shape of cells changes  
because of aging in the marking device.  
(Reference: Samples were made using a Vector Co. pin-stamping  
machine)  
Easy Setup  
Setup is easily achieved with a Memory Card (compact flash mem-  
ory) slot on the V530-R160E and V530-R160EP. Just insert a card to  
easily copy settings or save images. There is no need to carry a per-  
sonal computer and cables for process switch-overs.  
Dot Codes* Read at Any Angle: 360°  
Compatibility  
Codes can be read even with rough backgrounds on the casting  
surface or other locations.  
Dot codes* can be read at any angle through a 360° range.  
* Dot codes are 2-dimensional codes in which dots form the cells.  
2
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP  
 
Ordering Information  
List of Models  
Item  
Description  
Model  
V530-R160E, V530-R160EP  
F150-KP-2D 2M  
F150-S1A-2D  
Controller  
---  
Console  
2-m cable  
---  
Camera  
Camera Cable  
Monitor Cable  
Liquid Crystal Monitor  
Video Monitor  
Parallel Cable  
Memory Card  
3-m cable  
2-m cable  
---  
F150-VS-2D 3M  
F150-VM-2D 2M  
F150-M05L-2D  
F150-M09-2D  
---  
Cable with loose wires for Parallel I/O Connector (2-m cable)  
Card capacity: 64 MB  
F160-VP  
F160-N64S(S)  
Card capacity: 128 MB  
QM300-N128S  
XW2Z-200S-V  
RS-232C Cable  
For IBM PC/AT or compatible computer (2-m cable)  
For SYSMAC PLC (2-m cable)  
XW2Z-200T  
Specifications  
V530-R160E, V530-R160EP Controller  
Item  
Specifications  
V530-R160EP  
PNP  
Model  
V530-R160E  
NPN  
Input/Output type  
Applicable codes  
Data Matrix ECC200: 10 × 10 to 64 × 64, 8 × 18, 8 × 32, 12 × 26, 12 × 36, 16 × 36, 16 × 48  
Data Matrix ECC000, ECC050, ECC080, ECC100, ECC140: 9 × 9 to 25 × 25  
QR Code (Model 1, 2): 21 × 21 to 41 × 41 (Version 1 to 6)  
Readable direction  
360°  
Number of pixels (resolution)  
512 (H) × 484 (V)  
Number of connectable cameras 2 max.  
Image memory function  
Operation method  
Processing method  
Memory Card slot  
Monitor interface  
Serial communications  
Parallel I/O  
Maximum of 35 images stored (internal memory in Controller).  
Selected from menu.  
Gray  
1
1 channel (color/monochrome)  
RS-232C/422A, 1 channel  
5 inputs:  
TRIG-A, TRIG-B, TRIG-C, TRIG-D, and RESET  
6 outputs: RUN, ERROR, OK/NG, BUSY, GATE, and ALARM  
20.4 to 26.4 VDC  
Power supply voltage  
Current consumption  
Ambient temperature  
Ambient humidity  
Weight  
Approx. 1.6 A max.  
Operating: 0 to 50°C, storage: 25 to 65°C (with no icing or condensation)  
35% to 85% (with no condensation)  
Approx. 570 g  
F150-S1A-2D Camera  
Item  
Picture element  
Effective pixels  
Shutter function  
Specifications  
1/3-inch CCD  
659 (H) × 494 (V)  
Electronic frame shutter  
Shutter speed: 1/100, 1/500, 1/2000, or 1/10000 s (menu selectable)  
Ambient temperature  
Ambient humidity  
Weight  
Operating: 0 to 50°C, storage: 25 to 60°C (with no icing or condensation)  
35% to 85% (with no condensation)  
Approx. 80 g  
4
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP  
 
Monitor  
Item  
Model No.  
Liquid Crystal Monitor  
F150-M05L-2D  
Video Monitor  
F150-M09-2D  
Size  
5.5 inches  
9 inches  
Type  
Liquid crystal color TFT  
320 × 240 dots  
Monochrome CRT  
Resolution  
Input signal  
800 TV lines min. (at center)  
NTSC composite video (1.0 V/75 )  
20.4 to 26.4 VDC  
Power supply voltage  
Current consumption  
Ambient temperature  
85 to 264 VAC  
Approx. 700 mA  
Approx. 200 mA  
Operating: 0 to 50°C, storage: 25 to 65°C  
Operating: 10 to 50°C, storage: 20 to 65°C  
(with no icing or condensation)  
(with no icing or condensation)  
Ambient humidity  
Operating/Storage: 35% to 85%  
(with no condensation)  
Operating/Storage: 10% to 90%  
(with no condensation)  
Weight (Monitor only)  
Accessories  
Approx. 1 kg  
Approx. 4.5 kg  
Operation manual, 4 mounting brackets  
Operation manual  
System Configuration  
Synchronous Sensor  
F150-KP-2D-2M  
Console  
Programmable Controller  
RS-232C Cable for SYSMAC PLC:  
XW2Z-200T  
Personal Computer  
RS-232C Cable for DOS Computer:  
XW2Z-200S-V  
V530-R160E  
V530-R160EP  
Controller  
F160-VP  
Parallel Cable  
Cameras  
F150-VS-2D 3M  
Camera Cable  
F150-S1A-2D  
Camera  
Monitors  
Memory Cards  
64 MB: F160-N64S(S)  
128 MB: QM300-N128S  
F150-M05L-2D  
Liquid Crystal Monitor Video Monitor  
(Color) (Monochrome CRT)  
F150-M09-2D  
F150-VM-2D 2M  
Monitor Cable  
(See  
note.)  
Recommended  
Power Supply:  
OMRON S82K-05024  
Note: F150-M09-2D does not conform to EC Directives.  
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP  
5
 
Dimensions  
Note: All units are in millimeters unless otherwise indicated.  
V530-R160E, V530-R160EP Controller  
12  
60  
56  
60  
12  
Four, M3 mounting holes  
with depth of 4.8  
Four, M3 mounting holes  
with depth of 4.8  
110  
9
92  
Four, M4 mounting holes with depth of 6  
F150-S1A-2D Camera  
F150-KP-2D-2M Console  
13  
15.5  
50  
1.5  
48  
(40)  
8
25  
31  
ESC  
TRIG  
ENT  
14.5  
F150-S1A  
F150 lighting  
connector  
87  
40  
37  
SHIFT  
11  
F150-KP  
CONSOLE  
1.5  
30.5  
V530-R160 connector  
12 dia.  
12.5  
5
2000  
23  
10  
31.25  
16.75  
Two, M4 mounting holes with depth of 8  
Mounting dimensions  
1/4-20UNC with depth of 8  
F150-M09-2D Video Monitor  
21.25  
20  
6.75  
F150-M05L-2D Liquid Crystal Monitor  
222  
250  
Allowable panel thickness for mounting:  
1.6 to 4.8  
(46 max.)  
Mounting bracket  
233  
143  
(155)  
(145)  
SYNC  
132  
143  
50min  
50  
5
190  
160  
(5.5)  
22  
(100)  
185  
F150-VM-2D Monitor Cable  
42.2  
Tolerance: 1 mm  
Dimensions inside parentheses ( ) are reference values.  
174  
mm  
133.5+0.5  
0
Panel cutout diagram  
mm  
175.5+0.5  
0
6
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP  
 
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.  
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.  
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP  
7
 
Terms and Conditions  
of all possible uses of this product, nor is it intended to imply that the  
uses listed may be suitable for this product:  
WARRANTY, LIMITATIONS OF  
LIABILITY  
WARRANTY OMRON’s exclusive warranty is that the products are  
free from defects in materials and workmanship for a period of one  
year (or other period if specified) from date of sale by OMRON.  
• Outdoor use, uses involving potential chemical contamination or  
electrical interference, or conditions or uses not described in this  
catalog.  
• Nuclear energy control systems, combustion systems, railroad sys-  
tems, aviation systems, medical equipment, amusement machines,  
vehicles, safety equipment, and installations subject to separate  
industry or government regulations.  
OMRON MAKES NO WARRANTY OR REPRESENTATION,  
EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,  
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE  
OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES  
THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL  
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED  
USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS  
OR IMPLIED.  
• Systems, machines and equipment that could present a risk to life  
or property.  
Please know and observe all prohibitions of use applicable to this  
product.  
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING  
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING  
THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO  
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS  
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE  
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSI-  
BLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES,  
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CON-  
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS  
BASED ON CONTRACT, WARRANTY, NEGLIGENCE OR STRICT  
LIABILITY.  
PROGRAMMABLE PRODUCTS OMRON shall not be responsible  
for the user’s programming of a programmable product, or any con-  
sequence thereof.  
In no event shall responsibility of OMRON for any act exceed the indi-  
vidual price of the product on which liability is asserted.  
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WAR-  
RANTY, REPAIR OR OTHER CLAIMS REGARDING THE PROD-  
UCTS UNLESS OMRON’S ANALYSIS CONFIRMS THAT THE  
PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED  
AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION,  
ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR  
REPAIR.  
DISCLAIMERS  
PERFORMANCE DATA Performance data given in this catalog is  
provided as a guide for the user in determining suitability and does  
not constitute a warranty. It may represent the result of OMRON’s  
test conditions, and the user must correlate it to actual application  
requirements. Actual performance is subject to the OMRON War-  
ranty and Limitations of Liability.  
APPLICATION CONSIDERATIONS  
SUITABILITY FOR USE OMRON shall not be responsible for confor-  
mity with any standards, codes or regulations which apply to the  
combination of the product in the customer's application or use of the  
product.  
CHANGE IN SPECIFICATIONS Product specifications and accesso-  
ries may be changed at any time based on improvements and other  
reasons. It is our practice to change part numbers when published  
ratings or features are changed, or when significant construction  
changes are made. However, some specifications of the product may  
be changed without any notice. When in doubt, special part numbers  
may be assigned to fix or establish key specifications for your appli-  
cation. Please consult with your OMRON representative at any time  
to confirm actual specifications of purchased product.  
At the customer's request, OMRON will provide applicable third party  
certification documents identifying ratings and limitations of use  
which apply to the product. This information by itself is not sufficient  
for a complete determination of the suitability of the product in combi-  
nation with the end product, machine, system, or other application or  
use.  
ERRORS AND OMISSIONS The information in this catalog has  
been carefully checked and is believed to be accurate; however, no  
responsibility is assumed for clerical, typographical or proofreading  
errors, or omissions.  
The following are some examples of applications for which particular  
attention must be given. This is not intended to be an exhaustive list  
Complete terms and conditions for product purchase and use are on Omron’s website at  
www.omron.com/oei under the “About Us” tab, in the Legal Matters section.  
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4  
OMRON ON-LINE  
OMRON ELECTRONICS LLC  
One Commerce Drive  
Schaumburg, IL 60173  
OMRON CANADA, INC.  
885 Milner Avenue  
Toronto, Ontario M1B 5V8  
847-843-7900  
416-286-6465  
For US technical support or other inquiries:  
800-556-6766  
5/03  
Specifications subject to change without notice  
Printed in USA  
Cat. No. GC RFID 4  
8
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP  
 

Miele Oven H4880BP User Manual
Miglia Technology DVR AlchemyTV User Manual
Niles Audio Telephone IRP6 User Manual
Olympus Camcorder EPL1BLK User Manual
Omega Universal Remote M 4292 1006 User Manual
Oreck Vacuum Cleaner XL2070RHSM User Manual
Oster Blender 126477 001 000 User Manual
Panasonic Flat Panel Television LCD Flat Panel TV User Manual
Panasonic Security Camera BLVT164P User Manual
Parkinson Cowan Cooktop 60 GLXA User Manual