Omron Blood Pressure Monitor 705CP II User Manual

Automatic Blood Pressure  
Monitor & Printer  
The World Hypertension  
League recommends regular blood  
pressure monitoring with clinically  
validated devices.  
Instruction manual  
Gebrauchsanweisung  
Gebruiksaanwijzing  
page  
1
Mode dꢀemploi  
page 67  
pagina 89  
pagina 111  
Seite 23  
Istruzioni per lꢀuso  
Instrucciones de uso  
pagina 45  
IM-HEM-759-E2-02-10/2011  
1628532-8F  
 
705CP-II English  
Regular blood pressure monitoring is essential for the  
prevention, the control and the management of  
hypertension. It also helps to support the doctors' work.  
The World Hypertension League is a world-wide  
association of experts specialising in hypertension. The  
World Hypertension League recommends regular blood  
pressure monitoring by doctors and patients with  
clinically validated devices.  
The World Hypertension League  
recommends regular  
blood pressure monitoring by  
doctors and patients with clinically  
validated devices  
As the worlds leading manufacturer OMRON provides a  
range of products for regular blood pressure monitoring.  
Important: Blood pressure measurement is not  
suitable in cases of serious arteriosclerosis  
(hardening of the arteries).  
Important  
instructions to  
help you obtain  
meaningful  
readings  
• The pulse display is not suitable for monitoring the  
frequency of cardiac pacemakers.  
• If you suffer from disorders of heart rhythm, known  
as arrythmia, you should only use this blood pressure  
monitor in consultation with your doctor. In certain  
cases the oscillometric measuring method can  
produce incorrect readings.  
• Pregnant women should only measure their own  
blood pressure in consultation with their doctor, since  
the readings may be changed by pregnancy.  
You should avoid eating, drinking (alcohol), smoking  
and sports before measuring your blood pressure, as  
this could affect your blood pressure level.  
• Donꢁt move, donꢁt speak while measurement is being  
taken.  
• Make yourself comfortable in a chair and relax before  
each reading.  
• We recommend that you monitor your blood pressure  
twice a day, in the morning after getting up and in the  
evening after work, or as advised by your doctor.  
Please remember: Self-measurement is not the  
same as medical treatment !  
You should never change the dose of medicines  
prescribed by your doctor.  
2
 
705CP-II English  
OMRON 705CP-II is a compact, fully automatic blood  
pressure monitor, operating on the oscillometric  
principle. It measures your blood pressure and pulse  
rate simply and quickly. It contains an intelligent “fuzzy  
logic” system for controlled inflation,  
Your blood  
pressure  
monitor:  
known as “Intellisense”. This is an  
the benefits  
advanced method of oscillometric  
measurement and does not require pressure pre-  
setting or re-inflation. OMRON is the worldꢁs leading  
manufacturer of blood pressure monitors with the goal  
to always fulfill the need for reliable regular monitoring.  
Set Button  
Heart Symbol  
Adjust Button  
AC Adapter Jack  
USB Connector  
Systolic Blood  
Pressure  
Diastolic Blood  
Pressure  
ON/OFF (O/I) button  
START ( ) button  
Air Jack  
Pulse Rate  
Date/Time Display  
Memory recall Button  
Cuff (Applicable cuff for Adults 22 to 32 cm.)  
Air Plug (Connects to Air Jack)  
Green Mark  
Air Tube  
3
 
705CP-II English  
Slide the battery cover off in the direction of the  
arrow.  
Battery  
installation /  
replacement  
Install or replace 4 “LR6” batteries so the +  
(positive) and – (negative) polarities match the  
polarities of the battery compartment as indicated.  
Replace the battery cover.  
NOTES :  
If the Low Battery Indicator (  
) appears on the  
display, replace all four batteries. Long-life alkaline  
batteries are recommended.  
Remove the batteries if the monitor will not be  
used for an extended period of time.  
Replace batteries within 30 seconds. If the  
batteries remain removed longer than that time,  
the set date and time will be deleted.  
4
 
705CP-II English  
Install the batteries and press the ON/OFF button.  
The display will show 0:00  
How to set time  
and date  
Press and hold the SET button.  
The year digits (2002) will flash.  
Press the ADJUST button to advance the digit(s)  
one at a time.  
If you hold down the ADJUST button, the digits will  
advance rapidly.  
DATE/TIME SET  
SET  
ADJUST  
Press SETꢂbutton when desired number is on the  
display to lock setting.  
Repeat Step 3-4 for month and date.  
Repeat Step 3-4 for hour and minutes.  
5
 
705CP-II English  
• You can wrap the cuff either on your right or left arm.  
How to apply  
the cuff  
(when wrapping on your left arm)  
Insert air tube to air jack (on the left side of the  
divice). The cuff must be airless.  
Remove tight-fitting clothing from your upper arm.  
Sit in a chair with your feet flat on the floor and  
place your arm on a table so that the cuff is at the  
same level as your heart.  
Put your arm through the cuff loop. The bottom of  
the cuff should be approximately 1 to 2 cm above  
the elbow. The green marker on the cuff should lie  
over the brachial artery on the inside of the arm.  
The tube should run down centre of arm  
approximately even with middle finger.  
Bottom Edge 1 to 2 cm  
Cuff Tube  
Green Mark  
6
 
705CP-II English  
Pull the cuff so that the top and bottom edges are  
tightened evenly around your arm.  
When the cuff is positioned correctly, close the  
velcro fastener FIRMLY.  
Make certain the cuff fits snugly around your arm.  
The cuff should make good contact with your skin.  
You should be able to fit your index finger  
between the cuff and your arm easily, so you  
can pull the cuff off and on.  
Relax your arm and turn your palm upward.  
Be sure there are no kinks in the air tubing.  
Right hand measurement  
7
 
705CP-II English  
Press the (O/I) button.  
How to take a  
reading  
a) All display symbols appear for approximately  
one second.  
b) When the monitor becomes ready to measure,  
the (  
) symbol appears on the display.  
Press the (START ) button and remain still.  
As the cuff begins to inflate, the monitor  
automatically determines your ideal inflation level.  
Because this monitor detects the pulse even  
during inflation, do not move your arm but remain  
still until the entire measurement completes.  
• If you want to stop the inflation or measurement,  
press the (O/I) button. The monitor will stop  
inflating and start deflating rapidly, then the  
monitor will turn off.  
Inflation  
Inflation stops automatically and measurement is  
started.  
As the cuff slowly deflates, decreasing numbers  
appear on the display and the (  
) symbol  
Deflation  
flashes at every heartbeat. In rare circumstances,  
a higher inflation may be necessary. In those  
cases, the monitor reinflates the cuff up to 30  
mmHg higher than initial inflation and restarts the  
measurement.  
8
 
705CP-II English  
When the measurement is complete, the cuff  
completely deflates and your blood pressure and  
pulse rate are displayed.  
NOTE :  
The monitor automatically stores blood pressure  
and pulse rate into the memory.  
• When 28 sets of readings are stored in memory,  
the oldest set will be deleted to store a new set.  
Press the (O/I) button to turn the monitor off.  
NOTE :  
If you forget to turn the monitor off, it will  
automatically shut itself off after five minutes.  
Instructions for special conditions:  
• If your systolic pressure is known to be more than  
220 mmHg, press and hold the (START ) button  
until the monitor inflates 30 to 40 mmHg higher  
than your suspected systolic pressure.  
START  
NOTE :  
Continue to press button  
Do not apply more pressure than necessary.  
The monitor will not inflate above 300 mmHg.  
9
 
705CP-II English  
This monitor has a memory capable of storing 28  
How to use the  
memory  
sets of readings. Every time you complete the  
measurement, the monitor automatically stores blood  
pressure and pulse rate.  
function  
• Turn on the monitor by pressing the (O/I) button.  
• Press the (  
) button to recall stored readings  
while the ( ) symbol is displayed.  
Date and Time of stored readings  
will be alternately displayed.  
To delete all the stored readings, press the (  
and the (START ) button simultaneously.  
) button  
NOTE :  
You can not delete the stored readings partially.  
START  
Press these two buttons  
at the same time.  
10  
 
705CP-II English  
• Before measuring, stretch your back and sit up  
straight, breath normally 5-6 times, relax your  
shoulders, arms and entire body.  
Hints on taking  
blood pressure  
readings  
• Slightly bend and support your elbow (e.g. on a  
table).  
• Do not move, talk or touch the device during  
measurement.  
• Stress influences your blood pressure, so try to  
relax before taking a measurement.  
To compare results, measurements must always  
be taken from the same arm.  
• Do not place the cuff over thick clothes and do not  
roll up your sleeve if it is too tight.  
• Align the cuff with the height of your heart (breast  
height). If necessary use a pillow or cushion.  
• Coldness raises your blood pressure. It is  
recommended to measure at room temperature  
(+20°C).  
• Relax before measurement. If necessary go to the  
bathroom before measurement.  
• Do not measure directly after bathing.  
• If you wish to interrupt measurement prematurely,  
press the (O/I) button. Inflation is stopped and the  
air is automatically released from the cuff.  
• Blood pressure measurements taken in a moving  
vehicle may be influenced by vibration.  
• If an error has occurred during measurement  
displayed. Please refer to the next chapter.  
E
is  
• The monitor should be switched off after  
measurement to avoid running down the batteries  
unnecessarily. If you forget to do so, the monitor  
switches itself off automatically after 5 minutes.  
11  
 
705CP-II English  
Failure, causes and rectification  
Failure and their possible causes  
Rectification  
Incorrect measurement is indicated by  
E
1. A correct reading could not be obtained  
because measurement was disturbed by  
movement of the body.  
1. Repeat the measurement keeping  
perfectly still. Do not move your arm and  
do not speak.  
2. The cuff is not fitted correctly.  
2. Check that the cuff is correctly fitted.  
Then repeat the measurement.  
3. Your clothing has constricted your  
blood flow.  
3. Remove the item of clothing which  
caused the constriction.  
4. There is still air in the cuff when the  
monitor is switched off.  
4. The unit may be defective. Please have  
it examined and, if necessary, repaired  
by OMRON.  
The (START ) button was pressed  
Wait for the ( ) symbol indicating  
before the (  
) symbol was displayed.  
readiness before you press the (START  
button.  
)
The blood pressure values displayed are  
extremely low or high, or they are  
implausible.  
Refer to the instructions and then repeat  
the measurement.  
The display does not light up when the  
(START ) button is pressed.  
1. The batteries are exhausted.  
1. Check the batteries and, if necessary, fit  
4 new batteries.  
2. The +/- poles of the batteries have been  
reversed.  
2. Reinsert the batteries with the +/- poles  
the right way round.  
3. The battery contacts are dirty.  
3. Clean the battery contacts with a dry  
cloth.  
The batteries are weak or exhausted.  
Fit new batteries.  
The cuff pressure does not rise  
Check that the air tube is properly  
connected to the monitor. Push the tube  
connector firmly into the socket.  
although the pump motor can be heard.  
problem with mem. function  
Contact your Omron retailer or distributor.  
Er  
12  
 
705CP-II English  
• For cleaning the monitor only use a soft, lightly  
Maintenance  
and storage  
moistened cloth.  
Do not use petroleum spirits, thinners or  
similar solvents !  
• Stains on the cuff can be carefully removed using  
a moist cloth and soapy water.  
Do not wash the cuff or make it wet !  
• Keep your blood pressure monitor in the storage  
case to protect it from dust and moisture.  
• Protect your monitor against vibrations and do not  
leave it in a place where temperatures are  
extremely low (below -20°C) or extremely high  
(above 60°C) or with high humidity (+ 85%).  
• Do not use your monitor at very low temperatures  
(below 10°C) or very high temperatures (above  
40°C).  
• Do not fold the cuff or air tube together too tightly  
and do not crease them.  
• Do not carry out repairs of any kind yourself.  
If a defect occurs, consult the OMRON distributor  
or Customer Services or seek the advice of your  
surgical appliance stockist or pharmacist.  
• The accuracy of this blood pressure monitor is  
designed to last a long time.  
• In order to increase the lifetime of the batteries  
take them out when you store the device for a  
longer period than 2 months.  
• Electro-magnetic fields can influence the  
measurement. Do not use a portable phone near  
this unit.  
13  
 
705CP-II English  
This device fulfils the provisions of the EC directive  
93/42/EEC (Medical Device Directive). This blood  
pressure monitor is designed according to the  
European standard EN1060, Non-invasive sphygmo-  
manometers Part 1: General requirements and Part  
3: Supplementary requirements for electromechani-  
cal blood pressure measuring systems. This OMRON  
product is produced under the strict quality system  
of OMRON HEALTHCARE CO. LTD., Japan. The Core  
component for OMRON blood pressure monitors,  
which is the Pressure Sensor, is produced in Japan.  
Technical data  
Model:  
OMRON 705CP-II  
Display:  
LCD digital display  
Blood Pressure  
Measurement Range:  
Accuracy:  
Pressure: 0 mm Hg to 299 mm Hg  
Pulse: 40 – 180/min.  
Pressure: 3 mm Hg  
Pulse: 5% of reading  
Memory:  
28 measurements  
Inflation:  
Fuzzy-Logic controlled by electric pump  
Automatic pressure release valve  
Capacitive pressure sensor  
Oscillometric method  
Deflation:  
Pressure Detection:  
Measurement Method:  
Power Source:  
4 Alkaline batteries 1.5V (Type LR6) or  
AC/DC adapter (optional, 6V = 4W)  
Capacity of new batteries is approx. 300 measurements  
10°C to 40°C  
Battery Life:  
Operating Temperature:  
Storage Temperature:  
Humidity:  
-20°C to 60°C  
15 to 90% RH maximum  
Storage humidity:  
Console Weight:  
Outer Dimensions:  
Cuff Dimensions:  
10 to 95% RH maximum  
Approximately 380g without batteries  
Approximately 115 (l) mm x 177 (w) mm x 71 (h) mm  
Approximately 140 mm x 480 mm  
(arm circumference 22 – 32 cm)  
Medium cuff, instruction manual, storage case, battery  
set  
Accessories:  
Made in China  
NOTE: Subject to technical modification without prior notice  
• Disposal of this product and used batteries should be carried out in accordance  
with the national regulations for the disposal of electronic products.  
= Type B  
14  
 
705CP-II English  
Calibration  
OMRON spare  
parts  
The accuracy of this blood pressure monitor has  
been carefully tested and is designed for a long  
service life. It is generally recommended to have the  
monitor inspected every two years to ensure correct  
functioning and accuracy. Please consult your  
authorised dealer or the OMRON Customer Service  
at the address given on the packaging/attached  
literature.  
AC adapter  
OMRON devices are especially designed for regular  
blood pressure monitoring. OMRON therefore has  
direct contact with medical specialists and takes  
advice, on the design and features of its blood  
pressure monitors.  
Small cuff  
Arm circumference 17 – 22 cm  
Spare parts & accessories  
Due to high company quality standards, OMRON  
considers the main unit as a non-serviceable part  
because of the necessity of proper calibration after  
replacement of high-tech components.  
Medium cuff  
Arm circumference 22 – 32 cm  
Extra large cuff  
Arm circumference 32 – 42 cm  
15  
 
705CP-II English  
Some useful information about blood pressure  
What is Blood Pressure ?  
Blood pressure is a measure of the force of blood flowing against the walls of the  
arteries. Arterial blood pressure is constantly changing during the course of the heartꢁs  
cycle. The highest pressure in the cycle is called the SYSTOLIC BLOOD PRESSURE;  
the lowest is the DIASTOLIC BLOOD PRESSURE. Both pressure readings, the  
SYSTOLIC and DIASTOLIC, are necessary to enable a doctor to evaluate the status of  
a patientꢁs blood pressure.  
Many factors such as physical activity, anxiety, or the time of day, can influence  
your blood pressure. Blood pressure is typically low in the morning and increases from  
afternoon to evening. It is lower in the summer and higher in the winter.  
Blood pressure is measured in millimetres of mercury (mmHg) and measurements  
are written with the systolic pressure before the diastolic e.g. A blood pressure written  
as 140/90, is referred to as 140 over 90 mmHg.  
High Blood Pressure  
The discovery that you have high blood pressure is more often than not a chance  
finding. People with high blood pressure usually feel well unless the blood pressure has  
been high for some time, and complications have occurred. Such complications may  
effect the heart, brain and other important organs. They may bring on ill health and  
affect your enjoyment of life. It is because of the complications, rather than the high  
blood pressure itself, that this condition is taken so seriously today.  
High blood pressure is sometimes referred to as raised blood pressure, elevated blood  
pressure, or hypertension. Most people with this condition require regular long-term  
drug treatment, usually in the form of tablets. Some can lower their blood pressure  
sufficiently by other means, such as changing diet and life-style.  
People who have high blood pressure, and who also understand their condition, have  
an advantage. They are more likely to attend for regular check-ups, to cooperate with  
advised diets and changes in lifestyle, and to take medicines correctly. This  
immediately leads to better health. It is hoped that, by a better understanding of high  
blood pressure and how it is treated, you will take an active and informed part in your  
health care, and so enjoy a better quality of life.  
16  
 
705CP-II English  
What Causes High Blood Pressure ?  
Blood pressure is only classed as high if it doesnꢁt go down when you rest. Permanently raised blood  
pressure can be caused by several factors such as hardening of the arteries, smoking or drinking too  
much alcohol. It can also be caused by cholesterol, a type of fat, building up inside your blood vessels  
and making them narrower. Being under stress can add to the problem.  
High blood pressure is also known to run in families hence if you find you have a high blood pressure it  
is a good idea to test other closely related members of your family.  
Fluctuation within a Day  
(Example: 35-year-old male)  
Blood pressure  
(mmHg)  
Breakfast  
Dinner  
Sleep  
Lunch  
Rest room  
Systolic  
blood  
pressure  
Diastolic  
blood  
pressure  
Time  
Brachial blood pressure data  
Why is it a Good Thing To Measure Blood Pressure at Home ?  
Having your blood pressure measured by a doctor can cause anxiety which is a cause itself of high  
blood pressure. As a variety of conditions affect blood pressure, a single measurement may not be  
sufficient for an accurate diagnosis.  
The blood pressure measured first thing in the morning after getting up, before eating and while at rest,  
is known as the fundamental blood pressure. In practice it is rather difficult to record the fundamental  
blood pressure, but it is important to get readings in an environment that is as close as possible to this.  
Systolic blood pressure  
(mmHg)  
Classification of Blood Pressure by the World Heath  
Organization  
Severe hypertension  
The World Health Organization (WHO) and the International  
180  
Moderate hypertension  
Society of Hypertention (ISH) developed the Blood Pressure  
160  
Classification shown in this figure.  
Mild hypertension  
140  
This classification is based on the blood presure values  
Normal systolic value  
measured on people in a sitting position in outpatient  
130  
Normal blood pressure  
departments of hospitals.  
120  
*There is no universally accepted definition of hypotension. However, those  
Optimal blood  
pressure  
Diastolic  
blood  
having the systolic pressure below 100 mmHg are assumed as hypotensive.  
pressure  
(mmHg)  
(target value)  
90  
100  
110  
80  
85  
According to the blood pressure classification by the WHO/ISH* (revised in 1999)  
* International Society of Hypertension  
17  
 
705CP-II English  
The OMRON printer can be conected to OMRON  
blood pressure monitors with IT functions.  
Introduction  
Description  
Printer Cover  
Printer Cable Plug  
Power/Operation  
Light  
Paper Feed  
Print Graph  
Print Current Data/Stop Printing  
Print All Data  
Slide the battery cover off in the direction of the  
arrow.  
Battery  
installation /  
replacement  
Install or replace 4 “LR6” batteries so the +  
(positive) and – (negative) polarities match the  
polarities of the battery compartment as indicated.  
Replace the battery cover.Remove the batteries if  
the monitor will not be used for an extended  
period of time.  
18  
 
705CP-II English  
Remove printer cable plug from the printer unit.  
How to connect  
the printer unit  
Connect printer cable plug cord to the main unit.  
The circle on the cable plug should face up.  
Open printer cover in the direction indicated by  
the arrow symbol and remove paper roll from the  
How to load the  
printer paper  
main unit.  
Peel of the glued edge of the printing paper  
included with the unit, and cut the first 10 cm (4  
inch) with a pair of scissors.  
Press theꢂFEED button while inserting the edge  
of the printing paper into the paper feeding slot.  
4in  
When the edge of the paper protrudes sufficiently,  
release the ꢂFEED button.  
Close the plastic printer cover. Make certain that  
the paper sticks out from the top when the cover  
is replaced.  
Thermal sensitive paper is supplied with the unit.  
Use only thermal paper of similar size (width  
approx. 38mm) and roll diameter (not to exceed  
approx. 26mm)! These rolls of paper can be  
ordered from OMRON. Printer paper can be  
ordered by your OMRON shop or distributor.  
19  
 
705CP-II English  
OMRON IT blood pressure monitors have the ability  
to print all the readings stored in memory.  
How to use the  
printer  
NOTE: • Make sure printer-unit is connected to main  
unit (see How to Connect Printer-Unit)  
• Do not use printer-unit without loading  
printer paper (see How to Load Printer  
Paper). Improper use will decrease  
operation life cycle of printer-unit.  
• Main unit does NOT have to be ON to  
operate printer-unit.  
• Printer-unit will automatically shutꢂOFF  
when printing is completed.  
• If you need to stop printing during printing  
process, press “DATA/STOP” button.  
Press “DATA/STOP” to print measurement of  
most recent reading.  
The numeric print-out will look like the  
following example:  
Month/Date  
Time  
7/9  
6:36 AM  
Systolic Reading  
Diastolic Reading  
Pulse Reading  
SYS  
111mmHg  
67mmHg  
77/min  
DIA  
PULSE  
Press “ALLꢂDATA” button to print a numerical  
list and average of all stored readings ( maximum  
depending on your blood pressure monitor).  
The numerical print-out will list all stored readings  
starting with the most recent reading to last stored  
reading:  
Systolic Reading  
Column  
Diastolic Reading  
Column  
Month(s)  
3-6  
D. T.  
mmHg  
SYS  
/min  
PUL  
Pulse Reading  
Column  
DIA  
Date  
20 15  
23 11  
1 15  
3 14  
5 7  
15 7  
20 12  
3 12  
10 12  
12 14  
14 7  
21 15  
22 12  
4 6  
113  
117  
113  
110  
112  
110  
106  
110  
108  
111  
107  
111  
121  
112  
112  
75  
69  
71  
67  
66  
61  
66  
65  
61  
56  
64  
64  
62  
64  
65  
67  
64  
63  
66  
64  
64  
65  
64  
67  
62  
64  
64  
66  
63  
65  
Oldest reading  
Time/Hour  
Most recent reading  
Average of all stored  
readings  
*AV.  
20  
 
705CP-II English  
Month(s)  
The month or months will be printed.  
Example: If the blood pressure reading was stored  
between months March-June, then the printout will  
indicate “3-6”.  
Date  
Only the dayꢁs date (1-31) will be printed.  
Example: If the blood pressure reading was stored  
on June 1st, then the printout will indicate 1 under  
the “D” column.  
Time/Hour  
Only the hour (in military time) will be printed.  
Example: if the blood pressure reading was stored  
at 3:00 PM, then  
the printout will indicate 15 under the “T” column.  
Note: If Time and Date was not initially set up  
before taking blood pressure measurement (see  
How to Set Time and Date) on printer-unit, the  
numerical value will not appear on print-out for  
month, time/hour and date.)  
Press “GRAPH” button to print a graph  
of all stored readings  
Month(s)  
3-6  
50  
mmHg  
200  
100  
150  
Oldest reading  
If reading is lower than 50  
mmHg or higher than 200  
mmHg, will appear.  
Systolic Reading  
Diastolic Reading  
Most recent reading  
Average diastolic reading of  
stored measurements  
Average systolic reading of  
stored measurements  
21  
 
705CP-II English  
Troubleshooting  
Error Indicator  
Cause  
Correction  
Printer cable plug is not  
connected properly or damaged  
Connect correctly reference p.10  
Contact your OMRON distributor.  
Nothing is printed  
Replace with new batteries  
Take measurement then print  
Batteries are worn  
No readings stored  
Printer paper is not installed  
correctly  
Install correctly  
Power/Operation light is blinking,  
stopped printing  
Batteries are worn  
Replace with new batteries  
No printer paper installed  
Printer paper jammed  
Ran out of printer paper  
Take paper jammed from the  
printer and install again  
No printer paper comes out  
Purchase new printer paper  
Specifications  
Power Source:  
Battery Life:  
4 “AA” batteries  
Approximately 300 uses  
Paper Usage:  
Approximately 200 uses for 1 roll  
(Printer) Weight:  
Approximately 6 oz. (170 g) (not including  
batteries)  
(Printer) Dimensions:  
Approximately 4 4ꢃ5'' (l) x 2 4ꢃ5'' (w) x 2'' (h)  
(123 mm x 72 mm x 50 mm)  
NOTE: These specifications are subject to change without notice.  
EU-representative:  
OMRON HEALTHCARE EUROPE B.V.  
Scorpius 33, 2132 LR Hoofddorp  
THE NETHERLANDS  
Disposal of this product and used batteries should be carried out in  
accordance with the national regulations for the disposal of electronic  
products.  
22  
 
Manufacturer  
OMRON HEALTHCARE Co., Ltd.  
53, Kunotsubo, Terado-cho, Muko, Kyoto,  
617-0002 JAPAN  
EU-representative  
OMRON HEALTHCARE EUROPE B.V.  
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS  
EC  
REP  
Production facility  
Produktionsstätte  
OMRON (DALIAN) CO., LTD.  
Dalian, CHINA  
Productiefaciliteit  
Site de production  
Oficina de producción  
Stabilimento di produzione  
Subsidiary  
OMRON HEALTHCARE UK LTD.  
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.  
Niederlassung  
Dochteronderneming  
Succursale  
OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH  
John-Deere-Str. 81a, 68163 Mannheim, GERMANY  
Empresa filial  
Consociata  
OMRON SANTÉ FRANCE SAS  
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, FRANCE  
Uniquement pour le marché français: OMRON Service Après Vente  
Nº Vert 0 800 91 43 14  
Made in China  
Hergestellt in China  
Geproduceerd in China  
Fabriqué en Chine  
Fabricado en China  
Prodotto in Cina  
 

Munchkin Baby Carrier Cargo Sling User Manual
Nady Systems Water System HM 10 User Manual
NETGEAR Network Card WNDAP330 100NAS User Manual
Niles Audio Car Speaker OS53 User Manual
Oki Printer 24DX Series User Manual
Onkyo Home Theater System HT S4100 User Manual
Oricom Conference Phone TP88 User Manual
Packard Bell DVR EHR 2080 User Manual
Panasonic Cordless Telephone KX TG2361JX User Manual
ParaBody Home Gym PBF849 User Manual