QUICK START
WARRANTY/DISCLAIMER
5
6
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in
materials and workmanship for a period of 25 months from date of
purchase of the base unit and 13 months from date of purchase on
Laser Sight Module. OMEGA’s WARRANTY adds an additional one (1)
month grace period to the normal one (1) year product warranty to
cover handling and shipping time. This ensures that OMEGA’s
customers receive maximum coverage on each product.
OS531
VISUAL FUNCTION FLOW CHART
3. Press the
key to lock the trigger. The
icon will appear. This allows the thermometer to
operate continuously whether or not the trigger is
OS532
OS533
MODE DISPLAY
DISPLAY
MODE
If the unit malfunctions, it must be returned to the factory for evaluation.
OMEGA’s Customer Service Department will issue an Authorized Return
(AR) number immediately upon phone or written request. Upon
examination by OMEGA, if the unit is found to be defective, it will be
repaired or replaced at no charge. OMEGA's WARRANTY does not apply
to defects resulting from any action of the purchaser, including but not
limited to mishandling, improper interfacing, operation outside of design
limits, improper repair, or unauthorized modification. This WARRANTY is
VOID if the unit shows evidence of having been tampered with or shows
evidence of having been damaged as a result of excessive corrosion; or
current, heat, moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of
OMEGA’s control. Components in which wear are not warranted, include
but are not limited to contact points, fuses, and triacs.
OS534
pulled. To unlock the trigger, press the
again.
key
L
CK
LCK
OS530L
OS530HR
OS53x-CF
OS523
LAL
4. To complete a temperature measurement, release
the trigger; the thermometer goes into sleep
mode.
icon flashes and the unit beeps
intermittently, the batteries must be replaced with
fresh batteries immediately.
☞
☞
LCK
LCK
ATC
NOTE: If the
OS524
®
OMEGASCOPE
OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for any
omissions or errors nor assumes liability for any damages that
result from the use if its products in accordance with information
provided by OMEGA, either verbal or written. OMEGA warrants
only that the parts manufactured by the company will be as
specified and free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENTATIONS OF ANY KIND
WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE,
AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The
remedies of purchaser set forth herein are exclusive, and the total
liability of OMEGA with respect to this order, whether based on
contract, warranty, negligence, indemnification, strict liability or
otherwise, shall not exceed the purchase price of the component
upon which liability is based. In no event shall OMEGA be liable for
consequential, incidental or special damages.
☞
☞
Handheld Infrared
Thermometer
LCK
LCK
PRN
While in these 5 modes:
☞
☞
Use
key to change
(Model OS533)
temperature from °F to °C
or vice versa.
LCK
For latest product manuals: omegamanual.info
LCK
OMEGAnet® On-Line Service
omega.com
Internet e-mail
Use
key to turn on the
☞
display backlighting.
Servicing North America:
One Omega Drive, P.O. Box 4047
Stamford. CT 06907-0047
Tel: (203) 359-1660
FAX: (203) 359-7700
e-mail: [email protected]
☞
LCK
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor
shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in
or with any nuclear installation or activity; or (2) in medical applications or
used on humans. Should any Product(s) be used in or with any nuclear
installation or activity, medical application, used on humans, or misused in
any way, OMEGA assumes no responsibility as set forth in our basic
WARRANTY/DISCLAIMER language, and, additionally, purchaser will
indemnify OMEGA and hold OMEGA harmless from any liability or damage
whatsoever arising out of the use of the Product(s) in such a manner.
U.S.A.:
ISO 9001 Certified
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety
and EMC/EMI regulations that apply. OMEGA is constantly pursuing
certification of its products to the European New Approach Directives. OMEGA
will add the CE mark to every appropriate device upon certification.
☞
Canada:
976 Bergar
Laval (Quebec) H7L 5A1, Canada
Tel: (514) 856-6928
FAX: (514) 856-6886
e-mail: [email protected]
The information contained in this document is believed to be
correct but OMEGA Engineering, Inc. accepts no liability for
any errors it contains, and reserves the right to alter
specifications without notice.
WARNING: These products are not designed for use in, and
should not be used for, human applications.
LCK
RETURN REQUESTS/INQUIRIES
For immediate technical or application assistance:
Direct all warranty and repair requests/inquiries to the OMEGA Customer
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,
PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER
FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO
AVOID PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any correspondence.
☞
®
U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA
PATENT NOTICE: U.S. PAT. D357,194, B1 5,368,392, 5,524,984, 5,727,880,
5,465,838 5,823,678, 5,823,679, 6,267,500B1, 6,123,453, 6,341,891B1/Canada
75811 D OMEGA ENGINEERING, INC., 2,116,055, 2,114,806/Czech Republic
25372/France 0378411 to 0378446, 2,767,921, 2 773 213 B1/Germany M 94 06
478.4, G 94 22 197.9, G 94 22 203.7/Italy RM940000913/Japan 988,378/
Netherlands 1007752, 25009-00/Spain mod. ut. 133292/Slovak Republic
24565/U.K. Registered 2041153, 9726133.3, EPO 0 644408, EP 1 085 307 A1
Other U.S. and International Patents Pending.
®
Customer Service: 1-800-622-2378/1-800-622-BEST
LCK
®
HAL
Engineering Service: 1-800-872-9436/1-800-USA-WHEN
Mexico:
En Espan˜ol: (001) 203-359-7803
FAX: (001) 203-359-7807
e-mail: [email protected]
FOR NON-WARRANTY REPAIRS,
consult OMEGA for current repair
charges. Have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number to cover
the COST of the repair or
calibration,
2. Model and serial number of the
product, and
3. Repair instructions and/or specific
problems relative to the product.
FOR WARRANTY RETURNS,
please have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number under
which the product was
PURCHASED,
2. Model and serial number of
the product under warranty, and
3. Repair instructions and/or
specific problems relative to
the product.
☞
(Model OS531, OS532
OS530L, OS530HR)
Servicing Europe:
Czech Republic: Frystatska 184, 733 01 Karviná, Czech Republic
Tel: +420 (0)59 6311899
FAX: +420 (0)59 6311114
Toll Free: 0800-1-66342
e-mail: [email protected]
CAUTION: Use of controls or adjustments
or performance of procedures
other than those specified here
may result in hazardous
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Tel: +49 (0)7056 9398-0
®
CAUTION
OMEGASCOPE
Warning and
FAX: +49 (0)7056 9398-29
Toll Free in Germany: 0800 639 7678
e-mail: [email protected]
OMEGA’s policy is to make running changes, not model changes,
whenever an improvement is possible. This affords our customers the
latest in technology and engineering.
LASER RADIATION - DO NOT STARE INTO BEAM
Certification
Label
OUTPUT <1 mW, WAVELENGTH 630-670 nm
CLASS II (2) LASER PRODUCT, COMPLIES
WITH FDA 21CFR 1040.10 & EN60825-1/11.2001
radiation exposure. Refer to the
Operator’s Manual for complete
warnings and cautions.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
United Kingdom: One Omega Drive, River Bend Technology Centre
© Copyright 2006 OMEGA ENGINEERING, INC. All rights reserved.
This document may not be copied, photocopied, reproduced, translated, or
reduced to any electronic medium or machine-readable form, in whole or in
part, without the prior written consent of OMEGA ENGINEERING, INC.
Northbank, Irlam, Manchester
ISO 9002 Certified
M44 5BD United Kingdom
Tel: +44 (0)161 777 6611
FAX: +44 (0)161 777 6622
Toll Free in United Kingdom: 0800-488-488
e-mail: [email protected]
MQS2891-0903
|