Omega Thermostat DP25B TC User Manual

5
6
WARRANTY/DISCLAIMER  
MADE IN  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in  
materials and workmanship for a period of one (1) year from the date of  
purchase. In addition to OMEGA’s standard warranty period, OMEGA  
Engineering will extend the warranty period for four (4) additional years if the  
warranty card enclosed with each instrument is returned to OMEGA.  
USA  
4. Press MENU to store the value.  
To Set the Decimal Point  
1. If it's not already shown,  
press MENU until the unit  
If the unit malfunctions, it must be returned to the factory for evaluation.  
OMEGA’s Customer Service Department will issue an Authorized Return (AR)  
number immediately upon phone or written request. Upon examination by  
OMEGA, if the unit is found to be defective, it will be repaired or replaced at no  
charge. OMEGA’s WARRANTY does not apply to defects resulting from any  
action of the purchaser, including but not limited to mishandling, improper  
interfacing, operation outside of design limits, improper repair, or unauthorized  
modification. This WARRANTY is VOID if the unit shows evidence of having  
been tampered with or shows evidence of having been damaged as a result of  
excessive corrosion; or current, heat, moisture or vibration; improper  
specification; misapplication; misuse or other operating conditions outside of  
OMEGA’s control. Components which wear are not warranted, including but not  
limited to contact points, fuses, and triacs.  
displays DEC.P  
/DEV  
/MAX  
/MAX  
SETPTS  
/DEV  
MENU  
RESET  
SETPTS  
MENU  
RESET  
/MAX  
SETPTS  
/DEV  
MENU  
RESET  
5. Press RESETtwice to display the current temperature.  
2. Press /DEV to show the  
current decimal point location.  
To Enter Setpoints:  
OMEGA is pleased to offer suggestions on the use of its various products.  
However, OMEGA neither assumes responsibility for any omissions or  
errors nor assumes liability for any damages that result from the use of its  
products in accordance with information provided by OMEGA, either  
verbal or written. OMEGA warrants only that the parts manufactured by it  
will be as specified and free of defects. OMEGA MAKES NO OTHER  
WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER,  
EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED  
WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.  
LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are  
exclusive, and the total liability of OMEGA with respect to this order,  
whether based on contract, warranty, negligence, indemnification, strict  
liability or otherwise, shall not exceed the purchase price of the  
component upon which liability is based. In no event shall OMEGA be  
liable for consequential, incidental or special damages.  
/DEV  
/MAX  
1. Press SETPTS to display the  
current setpoint. The leftmost  
digit will flash.  
SETPTS  
MENU  
RESET  
DP25-TC and DP25B-TC  
PROGRAMMABLE DIGITAL  
3. Press /MAX to move the  
decimal point to the desired  
location. The choices are  
THERMOCOUPLE CONTROLLER  
/MAX  
SETPTS  
SETPTS  
SETPTS  
/DEV  
MENU  
MENU  
MENU  
RESET  
RESET  
RESET  
FFFF or FFF.F.  
2. Press /DEV to select the  
®
/DEV  
/MAX  
SETPTS  
MENU  
RESET  
digit you want to change.  
®
4. Press MENU to store the value.  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall  
it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with  
any nuclear installation or activity; or (2) in medical applications or used on  
humans. Should any Product(s) be used in or with any nuclear installation or  
activity, medical application, used on humans, or misused in any way, OMEGA  
assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER  
language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA  
harmless from any liability or damage whatsoever arising out of the use of the  
Product(s) in such a manner.  
OMEGAnet® On-Line Service  
Internet e-mail  
/MAX  
/DEV  
3. Press /MAX to increase the  
Servicing North America:  
value of the flashing digit.  
USA:ꢀꢀ  
ISO 9001 Certifiedꢀ  
ꢀꢀ  
ꢀꢀ  
One Omega Drive, P.O. Box 4047  
Stamford CT 06907-0047  
TEL: (203) 359-1660ꢀꢀ  
/MAX  
/MAX  
SETPTS  
/DEV  
MENU  
RESET  
SETPTS  
/DEV  
MENU  
RESET  
FAX: (203) 359-7700  
FAX: (514) 856-6886  
RETURN REQUESTS / INQUIRIES  
5. Press RESET twice to display the current temperature.  
/MAX  
/DEV  
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service  
Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,  
PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER  
FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID  
PROCESSING DELAYS). The assigned AR number should then be marked on  
the outside of the return package and on any correspondence.  
Canada:> ꢀ  
976 Bergar  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
Laval (Quebec) H7L 5A1  
TEL: (514) 856-6928ꢀꢀ  
4. Press SETPTS to store the  
setpoint.  
To Select Temperature Unit  
(Fahrenheit or Celsius):  
The purchaser is responsible for shipping charges, freight, insurance and proper  
packaging to prevent breakage in transit.  
For immediate technical or application assistance:  
1. Press MENU until the display  
FOR WARRANTY RETURNS, please  
have the following information available  
BEFORE contacting OMEGA:  
USA and Canada:ꢀ  
ꢀꢀ  
ꢀꢀ  
Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA®  
Customer Service: 1-800-622-2378 / 1-800-622-BEST®  
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN®  
FOR NON-WARRANTY REPAIRS,  
consult OMEGA for current repair  
charges. Have the following information  
available BEFORE contacting OMEGA:  
shows RD.CF  
/DEV  
/MAX  
SETPTS  
MENU  
RESET  
1. P.O. number to cover the COSTof  
the repair,  
2. Model and serial number of product,  
and  
1. P.O. number under which the  
product was PURCHASED,  
2. Model and serial number of the  
product under warranty, and  
Mexico and ꢀ  
Latin American:ꢀ  
ꢀꢀ  
TEL: (001)800-TC-OMEGA®ꢀ  
En Español: (001) 203-359-7803ꢀ  
FAX: (001) 203-359-7807  
5. Repeat steps 1 through 4 to enter the next setpoint.  
/MAX  
SETPTS  
/DEV  
MENU  
RESET  
3. Repair instructions and/or specific  
problems relative to the product.  
3. Repair instructions and/or specific  
problems relative to the product.  
2. Press /DEV to display the  
Servicing Europe:  
current temperature unit.  
OMEGA’s policy is to make running changes, not model changes, whenever an  
improvement is possible. This affords our customers the latest in technology and  
engineering.  
Czech Republic:ꢀ  
ꢀꢀ  
ꢀꢀ  
Frystatska 184, 733 01 Karviná  
TEL: +420 59 6311899ꢀꢀ  
WARNING: These products are not designed for use in, and should not be used  
for, patient connected applications.  
FAX: +420 59 6311114  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
This device is marked with the international caution symbol. It is important  
to read the Setup Guide before installing or commissioning this device as  
it contains important information relating to safety and EMC.  
©
Copyright 2005 OMEGA ENGINEERING, INC. All rights reserved.  
Germany/Austria:ꢀ  
Daimlerstrasse 26, D-75392 Deckenpfronn, Germany  
/DEV  
/MAX  
SETPTS  
MENU  
RESET  
This document may not be copied, photocopied, reproduced, translated, or reduced  
to any electronic medium or machine-readable form, in whole or in part, without  
prior written consent of OMEGA ENGINEERING, INC.  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
TEL: +49 7056 9398-0ꢀꢀ  
Toll Free in Germany: 0800 639 7678  
FAX: +49 7056 9398-29  
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI  
regulations that apply. OMEGA is constantly pursuing certification of its products to  
the European New Approach Directives. OMEGA will add the CE mark to every  
appropriate device upon certification.  
The information contained in this document is believed to be correct but OMEGA  
Engineering, Inc. accepts no liability for any errors it contains, and reserves the right  
to alter specifications without notice.  
3. Press /MAX to select  
PATENT NOTICE: This product is covered by one or more of the following  
patents: U.S. Pat. No. Des. 336,895; 5,274,577; 6,243,021 / CANADA 2052599;  
2052600 / ITALY 1249456; 1250938 / FRANCE BREVET No. 91 12756 / SPAIN  
2039150; 2048066 / UK PATENT No. GB2 249 837; GB2 248 954 / GERMANY  
DE 41 34398 C2. The “Meter Case Bezel Design” is a trademark of NEWPORT  
Electronics, Inc. USED UNDER LICENSE. Other U.S. and International patents  
pending or applied for.  
United Kingdom:ꢀ  
ISO 9002 Certifiedꢀ  
One Omega Drive  
River BendTechnology Centre  
between °F and °C.  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
ꢀꢀ  
Northbank, Irlam Manchester M44 5BD United Kingdom  
TEL: +44 161 777 6611ꢀ FAX: +44 161 777 6622  
Toll Free in England: 0800 488 488  
®
/DEV MENU  
/MAX  
SETPTS  
RESET  
®
TRADEMARK NOTICE:  
®, and  
,
omega.com  
MQS3732/1205  
are trademarks of OMEGA Engineering, Inc.  
 

Miele Refrigerator K 12020 S User Manual
MTD Automobile Parts 179cc 208cc User Manual
Navigon Network Router 5100max User Manual
NEC Computer Monitor V422 User Manual
Nespresso Espresso Maker my machine User Manual
Nikon Film Camera FG User Manual
Nokia Cell Phone 3310 User Manual
Nostalgia Electrics Frozen Dessert Maker SCM 802 User Manual
Oki Fax Machine OF5800 User Manual
Panasonic Answering Machine KX TG643 User Manual