Omega Power Supply DP6 MLPS1 User Manual

DP6-MLPS1  
Power Supply  
M4533-0607  
INSTRUCTION  
SHEET  
Shop online at: omega.com e-mail: [email protected]  
For latest product manuals: omegamanual.info  
O
O
O
PROVIDES +12 VDC POWER FOR THE DP63000x SERIES  
12 VDC OUTPUT @ 400 mA  
UL Recognized Component,  
File # E313607  
EASILY ATTACHED TO BACK OF DP63000x  
DESCRIPTION  
SPECIFICATIONS  
1. POWER REQUIREMENTS: 85-250 VAC, 50/60 Hz, 14 VA.  
2. POWER OUTPUT: +16 VDC max @ 4 mA  
11.5 VDC min @ 400 mA  
The Model DP6-MLPS1 is a +12 VDC power supply designed to attach to  
the rear of the DP63000x Series. The DP6-MLPS1 can be powered from an 85-  
250 VAC source.  
3. ENVIRONMENTAL CONDITIONS:  
Operating Temperature: 0 to 60°C  
Storage Temperature: -30 to 75°C  
Operating and Storage Humidity: 85% max. (non-condensing) from 0°C  
to 50°C.  
Caution: The maximum output current of the DP6-MLPS1 is 400 mA. Check the  
specifications of the specific counter(s)/indicators(s) and sensors(s) being  
used to ensure that total current requirements do not exceed 400 mA.  
SAFETY SUMMARY  
Altitude: Up to 2000 meters  
4. CERTIFICATIONS AND COMPLIANCES:  
SAFETY  
All safety related regulations, local codes and instructions that appear in the  
manual or on equipment must be observed to ensure personal safety and to  
prevent damage to either the instrument or equipment connected to it. If  
equipment is used in a manner not specified by the manufacturer, the protection  
provided by the equipment may be impaired.  
UL Recognized Component, File # E313607, UL 61010-1, CSA C22.2  
No. 61010-1  
Recognized to U.S. and Canadian requirements under the Component  
Recognition Program of Underwriters Laboratories, Inc.  
Output meets Class 2 power requirements per UL 1310.  
IEC 61010-1, EN 61010-1: Safety requirements for electrical  
equipment for measurement, control, and laboratory use, Part 1.  
ELECTROMAGNETIC COMPATIBILITY  
Emissions and Immunity to EN 61326: Electrical Equipment for  
Measurement, Control and Laboratory use.  
CAUTION: Read complete instructions prior  
to installation and operation of the unit.  
CAUTION:  
Risk of electric shock.  
Immunity to Industrial Locations:  
Electrostatic discharge  
EN 61000-4-2  
Criterion A  
4 kV contact discharge  
8 kV air discharge  
Criterion A  
10 V/m  
Criterion A  
DIMENSIONS In inches (mm)  
Electromagnetic RF fields  
Fast transients (burst)  
EN 61000-4-3  
EN 61000-4-4  
2 kV power  
1 kV signal  
Surge  
EN 61000-4-5  
Criterion B  
1 kV L-L,  
2 kV L&N-E power  
1 kV signal  
Criterion A  
3 V/rms  
RF conducted interference  
Voltage dip/interruptions  
Emissions:  
EN 61000-4-6  
EN 61000-4-11 Criterion A  
0.5 cycle  
EN 55011  
Class B  
Notes:  
1. Criterion A: Normal operation within specified limits.  
2. Criterion B: Temporary loss of performance from which the unit self-  
recovers.  
5. CONSTRUCTION: High impact black plastic. Mounting hardware  
included. Installation Category II, Pollution Degree 2.  
6. CONNECTION: Two position terminal block which accepts one 14 AWG  
wire (torque terminal screws to 5 inch-lbs. [0.56 N-m]).  
7. WEIGHT: 2 oz (47 g)  
LP0696X  
 
WARRANTY/DISCLAIMER  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a  
period of 25 months from date of purchase. OMEGAs WARRANTY adds an additional one (1) month grace  
period to the normal two (2) year product warranty to cover handling and shipping time. This ensures  
that OMEGAs customers receive maximum coverage on each product.  
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGAs Customer Service  
Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon  
examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge.  
OMEGAs WARRANTY does not apply to defects resulting from any action of the purchaser, including but  
not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or  
unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered  
with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat,  
moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside  
of OMEGAs control. Components in which wear is not warranted, include but are not limited to contact  
points, fuses, and triacs.  
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA  
neither assumes responsibility for any omissions or errors nor assumes liability for any  
damages that result from the use of its products in accordance with information provided by  
OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the  
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR  
REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF  
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF  
LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of  
OMEGA with respect to this order, whether based on contract, warranty, negligence,  
indemnification, strict liability or otherwise, shall not exceed the purchase price of the  
component upon which liability is based. In no event shall OMEGA be liable for consequential,  
incidental or special damages.  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic  
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical  
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity,  
medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth  
in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and  
hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in  
such a manner.  
RETURN REQUESTS/INQUIRIES  
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE  
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR)  
NUMBER FROM OMEGAS CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING  
DELAYS). The assigned AR number should then be marked on the outside of the return package and on any  
correspondence.  
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent  
breakage in transit.  
FOR WARRANTY RETURNS, please have the  
following information available BEFORE  
contacting OMEGA:  
1. Purchase Order number under which the product  
was PURCHASED,  
FOR NON-WARRANTY REPAIRS, consult OMEGA  
for current repair charges. Have the following  
information available BEFORE contacting OMEGA:  
1. Purchase Order number to cover the COST of the  
repair,  
2. Model and serial number of the product under  
warranty, and  
3. Repair instructions and/or specific problems  
relative to the product.  
2. Model and serial number of the product, and  
3. Repair instructions and/or specific problems  
relative to the product.  
OMEGAs policy is to make running changes, not model changes, whenever an improvement is possible. This affords our  
customers the latest in technology and engineering.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2006 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied,  
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the  
prior written consent of OMEGA ENGINEERING, INC.  
 
Where Do I Find Everything I Need for  
Process Measurement and Control?  
OMEGA…Of Course!  
Shop online at omega.com  
TEMPERATURE  
] Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies  
] Wire: Thermocouple, RTD & Thermistor  
] Calibrators & Ice Point References  
] Recorders, Controllers & Process Monitors  
] Infrared Pyrometers  
PRESSURE, STRAIN AND FORCE  
] Transducers & Strain Gages  
] Load Cells & Pressure Gages  
] Displacement Transducers  
] Instrumentation & Accessories  
FLOW/LEVEL  
] Rotameters, Gas Mass Flowmeters & Flow Computers  
] Air Velocity Indicators  
] Turbine/Paddlewheel Systems  
] Totalizers & Batch Controllers  
pH/CONDUCTIVITY  
] pH Electrodes, Testers & Accessories  
] Benchtop/Laboratory Meters  
] Controllers, Calibrators, Simulators & Pumps  
] Industrial pH & Conductivity Equipment  
DATA ACQUISITION  
] Data Acquisition & Engineering Software  
] Communications-Based Acquisition Systems  
] Plug-in Cards for Apple, IBM & Compatibles  
] Datalogging Systems  
] Recorders, Printers & Plotters  
HEATERS  
] Heating Cable  
] Cartridge & Strip Heaters  
] Immersion & Band Heaters  
] Flexible Heaters  
] Laboratory Heaters  
ENVIRONMENTAL  
MONITORING AND CONTROL  
] Metering & Control Instrumentation  
] Refractometers  
] Pumps & Tubing  
] Air, Soil & Water Monitors  
] Industrial Water & Wastewater Treatment  
] pH, Conductivity & Dissolved Oxygen Instruments  
 

Miele Coffeemaker CVA615 User Manual
National Instruments Network Card NI CardBus 8310 to PXI Expansion User Manual
Nissan Automobile 2008 Frontier User Manual
Nissan Automobile Accessories 4073 User Manual
Nokia Satellite TV System 110 S User Manual
Oki Printer 425D User Manual
Omega Vehicle Security Automobile Alarm K9 5Classic User Manual
Omron Healthcare Blood Pressure Monitor HEM 775 User Manual
Panasonic Telephone KXTGM240S User Manual
ParaBody Home Gym 336101 User Manual