Omega Engineering Welder DP41 E User Manual

WARNING: These products are not designed for use in, and should not be used for, patient  
connected applications.  
5
6
This device is marked with the international caution symbol. It is important to read the  
SetupGuide before installing or commissioning this device as it contains important  
information relating to safety and EMC.  
Dec pt  
Set Default Decimal Point  
Scale Input Values  
1. Press MENU. The meter displays:  
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply.  
OMEGA is constantly pursuing certification of its products to the European New Approach  
Directives. OMEGA will add the CE mark to every appropriate device upon certification.  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
1. Press /MIN to display “INPUT 1”:  
INPUT1  
Press /MIN again. The meter  
The information contained in this document is believed to be correct, but OMEGA Engineering,  
Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications  
without notice.  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
displays “000000”. Enter the INPUT 1  
value recorded in step 1 of the Measure  
Input Values section of this quick start.  
2. Press /MIN to display the current  
decimal point. Change the display, if  
necessary, to read “FFFFFF.” (Use  
/MAX to change the decimal point  
position).  
® are trademarks of OMEGA  
®
®
,
,
TRADEMARK NOTICE:  
omega.com  
FFFFFF  
Engineering, Inc.  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
2. Press MENU. The meter displays  
“READ 1”:  
READ 1  
Press /MIN to display a six-digit  
number. Change the meter to read  
“000000”. (Use /MIN to scroll  
through digits and /MAX to change  
the digit’s value.)  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
3. Press MENU. The meter stores changes (if applicable),  
then displays “CNT BY”.  
WARRANTY/DISCLAIMER  
stored  
CNTBY  
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and  
workmanship for a period of 13 months from date of purchase. OMEGA Warranty adds an  
additional one (1) month grace period to the normal one (1) year product warranty to cover  
handling and shipping time. This ensures that OMEGA’s customers receive maximum  
coverage on each product.  
DP41-E  
High Performance Process Indicator  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
3. Press MENU. The meter displays  
“INPUT 2”:  
INPUT2  
If the unit should malfunction, it must be returned to the factory for evaluation. OMEGA’s  
Customer Service Department will issue an Authorized Return (AR) number immediately upon  
phone or written request. Upon examination by OMEGA, if the unit is found to be defective it will  
be repaired or replaced at no charge. OMEGA'S WARRANTY does not apply to defects resulting  
from any action of the purchaser, including but not limited to mishandling, improper interfacing,  
operation outside of design limits, improper repair, or unauthorized modification. This  
WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence  
of being damaged as a result of excessive corrosion; or current, heat, moisture or vibration;  
improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s  
control. Components which wear are not warranted, including but not limited to contact points,  
fuses, and triacs.  
Press /MIN. The meter displays  
“000000”. Enter the INPUT 2 value  
recorded in step 2 of the Measure Input  
Values section of this quick start.  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
4. Press RESET twice. The meter momentarily displays  
“RESET 2” then returns to the run mode. The meter  
will now read the input signal (4mA = ≈ 000000.  
and 20mA = ≈ 020000.).  
®
®
OMEGAnet® On-Line Service  
Internet e-mail  
4. Press MENU. The meter displays  
“READ 2”:  
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA  
neither assumes responsibility for any omissions or errors nor assumes liability for any damages  
that result from the use if its products in accordance with information provided by OMEGA, either  
verbal or written. OMEGA warrants only that the parts manufactured by it will be as specified and  
free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY  
KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED  
WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSEARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies  
of purchaser set forth herein are exclusive and the total liability of OMEGA with respect to this  
order, whether based on contract, warranty, negligence, indemnification, strict liability or  
otherwise, shall not exceed the purchase price of the component upon which liability is based. In  
no event shall OMEGA be liable for consequential, incidental or special damages.  
Measure and Record Input Values  
READ 2  
INPUT1  
Servicing North America:  
1. Apply 4mA to the input and record the  
display reading.  
INPUT 1 = _________________  
Refer to this as Input One.  
Press /MIN to display a six digit  
number. Change the meter to read  
“001000”. (Use /MIN to scroll through  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
USA:NN  
ISO 9001 CertifiedN  
One Omega Drive, P.O. Box 4047  
Stamford CT 06907-0047  
TEL: (203) 359-1660NN  
NN  
NN  
FAX: (203) 359-7700  
FAX: (514) 856-6886  
digits and /MAX to change the digit’s value.)  
Canada:NN  
976 Bergar  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a  
“Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2)  
in medical applications or used on humans. Should any Product(s) be used in or with any nuclear  
installation or activity, medical application, used on humans, or misused in any way, OMEGA  
assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and  
additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or  
damage whatsoever arising out of the use of the Product(s) in such a manner.  
NN  
NN  
NN  
Laval (Quebec) H7L 5A1  
TEL: (514) 856-6928NN  
INPUT2  
2. Apply 20mA to the input and record the  
display reading.  
INPUT 2 = _________________  
Refer to this as Input Two.  
5. Press MENU. The meter stores changes and displays:  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
For immediate technical or application assistance:  
stored  
Dec pt  
USA and Canada:N  
Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA®  
Customer Service: 1-800-622-2378 / 1-800-622-BEST®  
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN®  
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA  
RETURN REQUESTS / INQUIRIES  
NN  
NN  
ꢀꢀ  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department.  
BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN  
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE  
DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number  
should then be marked on the outside of the return package and on any correspondence.  
3. Press MENU until the meter displays:  
4. Press MENU until the meter displays:  
Mexico and N  
Latin American:ꢀ  
NN  
TEL: (001)800-TC-OMEGA®N  
En Español: (001) 203-359-7803N  
FAX: (001) 203-359-7807  
IN CNF  
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to  
prevent breakage in transit.  
6. Press /MIN to display the current decimal point. Press  
/MAX to change the decimal point location to “FFFFF.F”.  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
Servicing Europe:  
FOR WARRANTY RETURNS, please have  
FOR NON-WARRANTY REPAIRS, consult  
the following information available BEFORE OMEGA for current repair charges. Have the  
Benelux:NN  
Postbus 8034, 1180 LA Amstelveen, The Netherlands  
TEL: +31 20 3472121NN FAX: +31 20 6434643  
contacting OMEGA:  
following information available BEFORE  
contacting OMEGA:  
NN  
NN  
NN  
1. P.O. number under which the product  
was PURCHASED,  
Toll Free in Benelux: 0800 0993344N  
7. Press MENU. The meter stores this change, then displays  
“CNT BY”  
stored  
CNTBY  
1. P.O. number to cover the COST of the  
repair,  
2. Model and serial number of product, and  
3. Repair instructions and/or specific  
problems relative to the product.  
Press /MIN to display “INP6=0”  
Change the meter to read “INP.6=1”  
(Use /MIN to scroll through digits  
and /MAX to change the digit’s value).  
INp6=0  
2. Model and serial number of the product  
under warranty, and  
Czech Republic:N  
Rudé armády 1868, 733 01 Karviná 8  
TEL: +420 69 6311899N FAX: +420 69 6311114  
3. Repair instructions and/or specific  
problems relative to the product.  
NN  
NN  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is  
possible. This affords our customers the latest in technology and engineering.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
© Copyright 2002 OMEGA ENGINEERING, INC. All rights reserved.  
France:NN  
9, rue Denis Papin, 78190 Trappes  
TEL: +33 130 621 400N FAX: +33 130 699 120  
Toll Free in France: 0800406342  
NN  
NN  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
NN  
This document may not be copied, photocopied, reproduced, translated, or reduced to any  
electronic medium or machine-readable form, in whole or in part, without prior written consent  
of OMEGA ENGINEERING, INC.  
5. Press MENU. The meter stores changes and displays:  
Germany/Austria:N  
Daimlerstrasse 26, D-75392 Deckenpfronn, Germany  
TEL: +49 7056 9398-0N FAX: +49 7056 9398-29  
Toll Free in Germany: 0800 639 7678  
NN  
NN  
NN  
8. Press RESET twice. The meter displays:  
“RESET 2”, then returns to the run  
mode. The meter is now scaled to  
read 0 to 100.0 for a 4-20 mA input.  
PATENT NOTICE: This product is covered by one or more of the following patents: U.S.  
Pat. No. Des. 336,895; 5,274,577 / CANADA 2052599; 2052600 / ITALY 1249456;  
1250938 / FRANCE BREVET No. 91 12756 / SPAIN 2039150; 2048066 / UK PATENT  
No. GB2 249 837; GB2 248 954 / GERMANY DE 41 34398 C2. The “Meter Case Bezel  
Design” is a trademark of NEWPORT Electronics, Inc., registered in the U.S. USED  
UNDER LICENSE. OTHER INTERNATIONAL PATENTS PENDING.  
REset2  
stored  
INSCOF  
United Kingdom:N  
One Omega Drive  
ISO 9002 CertifiedN  
River Bend Technology Centre  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
NN  
NN  
NN  
NN  
Northbank, Irlam Manchester M44 5BD United Kingdom  
TEL: +44 161 777 6611N FAX: +44 161 777 6622  
Toll Free in England: 0800 488 488  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
/MIN  
SETPTS  
/MAX  
MENU  
RESET  
12450ML-99 Rev.F  
MQS1297/0202  
 

Miele Coffeemaker CVA 4070 EN CA User Manual
Multi Link Cordless Telephone ML 001 User Manual
Multiquip Portable Generator dca 60ssai User Manual
Nady Systems Speaker System FWA12 User Manual
NetComm Network Router 3G9W User Manual
Nokia Projector NP1250 User Manual
Omega Speaker Systems Fitness Electronics FL 7600 User Manual
Onkyo CD Player DX R700 User Manual
Oricom Telephone TP29 User Manual
ParaBody Home Gym 704101 User Manual