Olympus Oven VT429101 User Manual

VT429101  
OLYMPUS AMERICA INC.  
OLYMPUS OPTICAL CO. (EUROPA) GMBH  
Wendenstrasse 14-18, 20097 Hamburg, Germany  
QuickStart Guide  
Two Corporate Center Drive, Melville,  
NY 11747-3157, U.S.A.  
UNPACKING THE BOX CONTENTS  
Gather your digital camera and the parts as shown in the illustration. You’ll need these to complete the steps for the  
camera set-up procedures that follow.  
START HERE  
It is strongly recommended that you follow these  
step-by-step numbered instructions to set up and  
quickly begin using your new Digital Camera.  
BLM-1 Lithium ion battery  
BCM-1 lithium ion battery charger  
USB cable  
(grey color)  
IEEE1394  
cable  
Digital camera  
CD-ROM  
Strap  
1
*
Cards (Compact Flash and Microdrive) are optional. The following items are also included in this package: Reference manual ,  
2
*
Basic Manual , video cable, warranty card, registration card (not pvovided in some areas), and safety precautions booklet.  
For more detailed instructions on advanced features, please refer  
to the instruction manual.  
*1 Provided as a pdf file on the CD-ROM in some areas.  
*2 Provided in areas where the Reference Manual is on the CD-ROM.  
3) Load the battery as illustrated.  
4) Close the battery compartment cover and turn  
the battery compartment lock to  
.
PREPARE THE CAMERA FOR USE  
Direction indicating mark  
Before you begin using your Olympus digital camera…  
3
Attaching the strap  
a.  
2
1
Attach the strap as shown below.  
Attaching a lens to the camera  
1) Remove the body cap from the camera.  
2) Remove the rear cap from the lens.  
3) Align the lens attachment mark (red) on the camera  
with the alignment mark on the lens (red), then insert the  
d.  
Alignment  
mark (Red)  
1
Charging the battery  
b.  
lens into the camera’s body  
until you hear it click 2 .  
. Rotate the lens clockwise  
1
2
The battery is not fully charged when purchased. Before use,  
be sure to charge the battery with the specified provided  
charger (BCM-1).  
Lens attachment  
mark (Red)  
Hold the battery with its terminals facing the charger and  
align the battery with the guideline (  
shown in the illustration. Slide the battery into the charger.  
) on the charger as  
Inserting the card  
1) Turn the card cover lock in the direction of the arrow and open the card cover.  
2) Insert the card fully with the mark side  
e.  
facing toward the monitor side (the camera’s  
rear side) as illustrated.  
3) Close the card cover fully until it is  
Loading the battery  
1) Make sure that the camera's  
c.  
2) Turn the battery compartment lock to  
open the battery compartment cover.  
and  
Mark  
locked closed.  
power switch is set to OFF.  
Battery  
compartment  
cover  
Card cover lock  
Card cover  
Battery  
compartment  
lock  
1
3
Card slot  
2
When using  
Microdrive  
When using  
Compact Flash  
c.Camera Diagram and Controls  
Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.  
TURNING ON THE  
CAMERA  
Control panel  
LIGHT (Control panel  
illumination) button  
White balance sensor  
(Exposure  
Lens attachment mark  
compensation) button  
ISO button  
Hot shoe  
Mode dial  
Power switch  
a.Turn the camera ON  
Self-timer/Remote  
control lamp,  
AF illuminator  
Mode dial lock  
Lens lock pin  
Power ON :  
Power OFF :  
Set the power switch to OFF.  
Set the power switch to ON.  
Lens release  
button  
Remote control  
receiver  
WB (White  
balance) button  
Mirror  
Power switch  
Sub dial  
Mount  
Preview button  
(Flash mode) button  
(Record mode) button  
(One-touch WB) button  
(Attach the lens after removing the body  
cap from the camera.)  
Shutter button  
TIP: After a specified period of time elapses  
with no operations being performed, the  
camera enters the sleep mode (stand-by) to  
save battery power. Press the shutter button  
to wake up the camera.  
(Metering) button  
DRIVE button  
Diopter adjustment dial Main dial  
Eyepiece shutter lever  
Strap eyelet  
AEL button  
Card access lamp  
BKT (Auto bracket) button  
Connector cover  
(AF frame  
selection) button  
External flash  
connector  
IEEE 1394  
connector  
Focus mode lever  
Viewfinder  
(Playback  
Set the focus mode lever to S.  
Remote cable  
connector  
mode) button  
Monitor  
(Menu) button  
(Shown with  
b.Set the Date and Time (OPTIONAL)  
Although this is not required, it is recommended that you set the  
date and time. This affects the way image file names are  
created, and will conveniently include this information with  
each picture. The date and time can also be set when the  
camera is in the playback mode.  
removable monitor  
cover attached.)  
Card cover lock  
INFO (Information  
display) button  
OK button  
USB connector  
Arrow pad  
Focus mode lever  
(Protect) button  
(Erase) button  
DC-IN jack  
VIDEO OUT jack  
• Set the power switch to ON.  
• Press  
• Press  
• Press once to highlight  
• Use  
to display the menu.  
three times to select  
Battery compartment  
lock  
.
Card slot  
Tripod socket  
, and then press once.  
to select the date format.  
• Adjust the date and time in the appropriate fields by using  
to select the field, and to set the proper value.  
Repeat this step until all date/time fields have been set.  
Note: Time is entered using the 24-hour format.  
• Press OK twice to set the date and time and exit the menu.  
Eject button  
Card cover  
Battery compartment  
cover  
Printed in Japan  
 

Miglia Technology Computer Drive VideoExpress Converter User Manual
Miller Electric Welding System 140 Auto Set User Manual
MTD Lawn Mower Series 520 Thru 530 User Manual
MTD Yard Vacuum 24665 9 User Manual
NDC comm Network Card NWH4020 User Manual
NETGEAR Computer Accessories WMS105 10000S User Manual
NeumannBerlin Microphone BS 9a User Manual
Oki Network Card Telephony Adapter User Manual
Olympus Microcassette Recorder WS 811 User Manual
Panasonic Answering Machine KX TG5632M User Manual