Oki Printer Accessories 42625501 User Manual

C3200/5150/C5200/C5400 Printers  
Fuser Instructions  
Fuser Replacement for Oki 42625501 & 42625502  
Warning!  
4. Remove the new fuser from its packaging, then remove any packing tape.  
If the printer has recently been powered on, some  
fuser components will be very hot. Handle the fuser  
with extreme care, holding it only by its handle, which  
will only be mildly warm to the touch. A warning  
label clearly indicates the area. If in doubt, switch  
the printer off and wait at least 10 minutes for the  
fuser to cool before opening the printer cover.  
5. Push the orange transport lock (1) to the left to release it (SNAP!), then  
remove the transport lock.  
1. Press the cover release and open the printer's top cover fully.  
6. Holding the new fuser by the handle, with the fuser pressure release lever  
(1) on the right, lower the fuser into the priner.  
2. Pull the two blue fuser lock levers (1) towards the front of the printer.  
7. Push the two blue retaining levers (1) toward the rear of the printer to lock  
the fuser in place.  
8.Close and latch the top cover.  
3. Holding the fuser by its handle, lift the fuser out of the printer. If the fuser is still  
warm, place it on a flat surface which will not be damaged by heat. After letting  
the fuser cool down, discard it.  
58368302  
 

Mr Handsfree Headphones Blue Chameleon User Manual
MTD Lawn Mower 020 Series User Manual
National Instruments Network Card NI 9481E User Manual
NETGEAR Network Router R6700 User Manual
Omnimount TV Mount OM10049 User Manual
Optimus Cassette Player SCP 90 User Manual
Oreck Vacuum Cleaner XL2606HH User Manual
Panasonic Air Compressor DD73C14GBU6 User Manual
Panasonic Power Supply LC P0612P User Manual
Patriot Products Chipper 10F CSV User Manual