Oki Computer Drive 59375102 User Manual

Hard Disk Drive (HDD)  
Installation Instructions  
59375102  
 
Prepare the Printer  
1. Turn off the printer.  
2. Detach the power cord from the back of the  
printer.  
3. Detach the interface cable from the back of  
the printer.  
4. Remove and save the thumbscrews at the  
top and bottom which hold the control  
board cover in place.  
3
 
5. Open the control board cover by pulling out  
and to the left.  
4
 
Install the Hard Disk  
Drive (HDD)  
1. Locate the drive connector (1) on the  
control board:  
5
 
2. Remove the hard disk drive from its  
shipping package.  
Caution!  
Observe antistatic precautions when  
installing the hard disk drive.  
3. Lift the handle on the HDD and insert the  
connector firmly into the socket on the  
control board.  
6
 
4. Press down on the handle to lock it in place.  
7
 
Complete the  
Installation  
1. Close the control board cover and reinstall  
the screws at the top and bottom.  
2. Reattach the interface cable, then the  
power cord.  
3. Turn on the printer.  
8
 
Verify the Installation  
Print the Configuration Report  
1. Press Enter to access the printer menu.  
2. Press Enter to select Configuration.  
3. Press the key.  
4. Press Enter to select Print Information.  
5. Press Enter to select Execute.  
The Configuration report prints.  
6. In the listing under Configuration, System,  
“HDD: installed” should appear.  
If you see “HDD: uninstalled, repeat the  
installation steps—checking to be sure that  
the Hard Disk Drive is firmly seated in the  
printer connector—until it does.  
9
 
Activate the HDD in the  
Driver  
Windows®  
Postscript Emulation Driver  
1. First  
Windows Vista  
a. Click Start Settings Hardware and  
Sound Printer.  
The Printer dialog box opens.  
Windows XP, Server 2003  
a. Click Start Settings Printers and  
Faxes.  
The Printers and Faxes dialog box opens.  
Windows 2000  
a. Click Start Settings Printers.  
The Printers dialog box opens.  
2. Right click the appropriate printer icon.  
Click Properties.  
3. Click the Device Settings tab.  
4. Scroll down to Installable Options. Click  
Printer Hard Disk.  
10  
 
5. Select Installed.  
6. Click OK and close the dialog box.  
PCL Driver  
1. First  
Windows Vista  
a. Click Start Settings Hardware and  
Sound Printer.  
The Printer dialog box opens.  
Windows XP, Server 2003  
a. Click Start Settings Printers and  
Faxes.  
The Printers and Faxes dialog box opens.  
Windows 2000  
a. Click Start Settings Printers.  
The Printers dialog box opens.  
2. Right click the PCL printer icon. Click  
Properties.  
3. Click the Device Option(s) tab.  
4. Click Printer Hard Disk.  
5. Click OK and close the dialog box.  
11  
 
Macintosh®  
Mac OS 10.2, 10.3, 10.4  
1. First  
OS 10.2  
a. Activate Print Center: Local Hard  
Drive Applications Utilities →  
Print Center.  
OS 10.3, 10.4  
a. Activate the Printer Setup Utility: Local  
HardDrive Applications Utilities  
Printer Setup Utility.  
2. Highlight the printer name. Select from the  
menu Printers Show Info.  
3. Click the Name & Location drop-down menu  
at the top of the screen and select  
Installable Options.  
4. Click the box next to Hard Disk to enable  
the option.  
5. Click Apply Changes and exit to the  
desktop.  
12  
 

Miele Freezer FN 14827 S ed User Manual
Milwaukee Grinder 5211 User Manual
Multiquip Music Mixer WM120PM User Manual
Multiquip Riding Toy HTX 44K4 User Manual
Musical Fidelity Computer Hardware V LINK192 User Manual
Niles Audio Stereo Amplifier AVDA 3 User Manual
Nokia Stereo System AD 43 User Manual
Nortel Networks Server NN42020 123 User Manual
Optoma Technology Projector TS725 User Manual
ParaBody Home Gym 894104A User Manual