Numark Industries Microphone WS32 User Manual

Users Manual  
PRODUCT WARRANTY  
1.  
NUMARK INDUSTRIES LLC ( NUMARK ) warrants to the original pur chaser that NUMARK'S produ cts are free from defects in material  
and workmanship under normal u se and service for the per iod commencing upon the date of purchase from an autho rized NUMARK  
dealer and continuing for the following period of time after that date for (1) Year.  
2.  
3.  
This Limited Warranty is conditioned upon proper use of the product by the purchaser.  
This Limited Warranty does n ot cover: (a) defects or damage r esulting from accident, m isuse, abuse, neglect, u nusual physical or  
electrical stress, modificat ion of any part of t he product, or cosmeti c damage; (b) equipment that has the serial number removed or  
made illegible; (c) all plastic surfaces and ot her externally exposed parts that are scratched or damaged du e to normal use; (d) defects  
or damage from improper testing, operation, maintenance, installation, adjustment, or service of the mixers; (e) crossfaders.  
4.  
5.  
During the applicable w arranty period, NUMARK will repair or replace, at N UMARK'S sole discretion, without charge to t he purchaser,  
any defective component part of the mixer. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or  
components when repairing any product or replace a product with a rebuilt, reconditioned or new product.  
THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK  
MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY  
APPLICABLE LAW, NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR  
SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS  
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK PRODUCT, BREACH OF WARRANTY, OR  
NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS AGENT HAS BEEN  
ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED  
WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS  
WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF  
THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS  
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT  
AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS  
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.  
6.  
This Limited Warranty allocates risk of product failure b etween purchaser and NU MARK, and NUMARK'S product pricing r eflects this  
allocation of risk and the limitation s of liability contained in this L imited Warranty. The agents, employees, distr ibutors, and dealers of  
NUMARK are not authorized to make modifications to this Limited Warranty, or make additional warrantie s binding on NUMARK.  
Accordingly, additional statements such as dealer adver tising or presentation, whether oral or written, do not constitute warrantie s by  
NUMARK and should not be relied up on. Some jurisdictions do not allow limitations on how long an impl ied warranty lasts, so the  
above limitation may not app ly to you. This warranty gives you specific legal rights, and you may also have other rig hts which vary  
under local laws.  
RETURN INFORMATION  
·
A Return Authorization num ber must be obtained fr om your local Numark Representative. For yo ur representative go to  
·
·
·
A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.  
The faulty equipment must be packed in its original packaging.  
One additional outer layer of packaging must be in cluded to ensure product safety. Failures to do so ma y inadequately  
protect the equipment in transit and, therefore, jeopardize the customer s warranty.  
·
·
Numark will not accept COD shipments and no call tags will be issued for merchandise return.  
Numark will not return repair ed merchandise to customers b y priority service, unle ss by written request at t he customer s  
cost. Requests must be submitted in writing with merchandise returned.  
·
The defective Numark equipment sho uld be sent, FREIGHT PREPAID with Return Authoriz ation number clearly printed on  
the outer packaging and original sales receipt enclosed to your local service center  
USA  
NUMARK INDUSTRIES  
Attention: Service Department  
11 Helmsman Avenue  
North Kingstown, RI 02852 USA  
UK  
NUMARK INDUSTRIES  
Attention: Service Department  
Unit:9 The Christy Estate  
Ivy Road Aldershot GU12 4TX  
England  
Phone: +1 (401) 295-9000  
Fax: +1
 
(401) 295-5200  
Phone: (44) 1252 341 400  
Fax: (44) 1252 353 810  
 
IMPORTANT SAFEGUARDS  
PARTS DESCRIPTION  
Parts Description  
CAUTION  
Do not open this product by yourself for adjustment.  
1
2
If water goes into this product, please turn off the power immediately and  
send it to after-sale service department of our company for handling.  
One receiver cannot receive signal from two same frequency microphones  
simultaneously. Other microphone with different frequency or brand cannot  
be used for this receiver.  
1. Receiver  
Front Panel  
3
(3)  
(2)  
(1) Power LED Indicator  
(2) Microphone Signal  
LED Indicator  
WARNING RISK OF HUMAN HEAVY INJURY OR DEATH  
IF USE IMPROPERLY  
(1)  
(3) Antenna  
During Operation  
To reduce the risk of fire or electric shock, do not remove the  
cover. High voltage parts inside. Submit thisequipment to  
Promic dealer for examination, adjustment and repair.  
Do Not  
Disassemble  
Back Panel  
Do not put vessel of liquid or small metal parts on the top of this  
equipment.  
Forbidden  
(4) Volume Control  
(5) AF Output  
To reduce the risk of fire or electric shock, do not let metal or  
flammable parts drop into this equipment.  
(4) (5) (6) (7)  
Forbidden  
(6) DC Input  
To reduce the risk of shock, do not touch power outlet when it thunders.  
(7) Power Switch  
Do Not Touch  
CAUTION RISK OF HUMAN HEAVY INJURY OR GOODS  
DAMAGE IF USE IMPROPERLY  
During Setup and Installation  
2. Microphone  
To reduce the risk of electric shock, do not pull power plug with wet hands.  
(1) Power LED Indicator  
(2) Power Switch  
Forbidden  
Forbidden  
(1)  
(2)  
To reduce the risk of fire or electric shock from damaged power  
cord, do not pull power cord when pull out the power plug.  
Always grasp the plug tightly then pull it out.  
(3) Battery Cover  
To reduce the risk of fire or electric shock from damaged power cord,  
do not move this equipment when the AC power plug is still on.  
Pull Out  
AC Plug  
(3)  
To reduce the risk of fire or electric shock, do not expose this  
equipment to moisture, dust and sun. Keep away from hot apparatus  
or place with oil, smoke and water.  
Forbidden  
5
2
5
 
FEATURES AND SPECIFICATION  
USERS GUIDE  
Features  
Users Guide  
1
Insert adapter DC plug into receiver DC input jack, insert the other AC plug  
into AC power supply outlet(According to the sign on the back side).  
Sound Signal Output Jack: Insert one end of the cable connector plug into  
signal output jack at the back of the receiver and the other end of the plug  
into KTV or amplifier MIC-IN jack.  
1. Frequency Range: VHF 170~250 MHZ.  
2. Frequency Stability  
3. Modulation(Max):  
0.005% quartz oscillation controlled.  
30KHZ.  
2
4. Frequency Response:50Hz~18KHz 3dB.  
5. Hum & Noise:96dB min.  
3
4
5
6
Push on receiver s power switch, if power LED indicator on front panel  
lights, this indicates that receiver works normally.  
6. Dynamic Range:100dB min.  
7. Distortion:less than 1%.  
Insert attached 9V battery into wireless microphone's battery compartment  
(pay attention to the positive and negative pole), and then close the cover.  
Turn on microphone power switch, LED indicator will flash once then off ,  
it indicates that microphone is ready to use.  
Wireless Microphone Features and Specification  
1. Antenna:built-in with noise terminator circuit.  
2. Battery:DC9V.  
At this time receiver's RF LED indicator will light. Adjust volume control  
to make receiver s volume to be in normal working state. Finish test of  
wireless microphone.  
3. Current Consumption:30mA.  
4. Power Output:20mW  
5. Spurious Emission:45dB min.  
Wireless Receiver Features and Specification  
1.Quartz controlled fixed frequency receiving mode.  
2.Sensitivity: 10dB/uV(S/N 60dB).  
3.Image and Spurious Rejection: min 80dB.  
4.Output: unbalanced 0.15V 600  
.
5.Receiver System: single channel non-diversity.  
6.Power Source: DC 12V.  
7.Dimensions: (H)220*(W)124*(D)32(MM).  
5
4
3
 

MTD Lawn Mower Series 400 User Manual
Murphy Switch WDU 0277 User Manual
NextBase Portable DVD Player SDV1102 D User Manual
Nikon Film Camera N6000 User Manual
Oregon Scientific Clock MSR939A User Manual
Oregon Scientific Heart Rate Monitor AD105 User Manual
Orion Car Audio Car Speaker XTR1002 User Manual
Panasonic Digital Camera AJ D215P User Manual
Panasonic Switch 2SD1450 User Manual
Paradyne Network Card 336x E1 User Manual