NuTone Universal Remote ICA 441WH User Manual

READ & SAVE THESE INSTRUCTIONS!  
INSTALLATION INSTRUCTIONS  
Indoor Remote Control  
MODEL: ICA-441WH  
For use with IMA4406, IM4406, IMA4006 or IM4006  
Series Systems to operate the ISA-78, IS-82, IS-76,  
IS-903, IS-905 and IS-908 Speakers.  
IMPORTANT: Speakers that do not have built-in controls  
require a separate remote control. Model ICA-441WH is  
designed for indoor use only.  
ROUGH-IN FRAME MOUNTING  
1. The remote control may be recess-mounted to the Model  
IR-91 Rough-In Frame.  
2. The wiring should be installed when the system is  
roughed-in.  
3. The remote controls require NuTone Model IW-6 3-twisted  
pair (6 wire) cable from the master station to the remote  
control location. NuTone Model IW-2 2-conductor twisted  
pair (22/2) cable is used from the remote control to the  
speaker. See instructions packaged with the rough-in  
frames.  
ORANGE  
RED  
WIRING CONNECTIONS  
1. Refer to Figure 1. As illustrated, connect wires from the  
master unit to the six (6) screw terminals. Red wire to the  
terminal marked red, red/white wire to the terminal marked  
red/white, etc.  
BLACK  
BLACK/WHITE  
ORANGE/WHITE  
RED/WHITE  
FIGURE 1  
3. Refer to Figure 2. Connect IW-2 cable from the speaker to  
the remote control's two (2) speaker wires.  
IMPORTANT – WHEN NUTONE MODEL IW-6R  
WIRING IS USED:  
ICA-441WH  
CIRCUIT  
BOARD  
CONNECT TO SCREWS ON PRINTED  
CIRCUIT BOARD MARKED:  
1
2
3
4
5
6
ORN  
BLK  
BLK/WHITE  
ORN/WHITE  
RED  
IW-2 CABLE  
TO SPEAKER  
RED/WHITE  
FIGURE 2  
BLUE STRIPE  
 

Miller Electric Welder 4500 Series User Manual
Multiquip Saw TP7X User Manual
Murphy Network Card 75160 Series User Manual
National Instruments Music Mixer cFP Al 110 User Manual
NETGEAR Network Router MBRN3000 100NAS User Manual
Omega Vehicle Security Electric Heater SH73343 User Manual
OPPO Digital DVD Player DV 983H User Manual
Oster Cookware CKSTSKFM05 User Manual
Palsonic CRT Television 5179G User Manual
Panasonic Network Card 2SD0965 User Manual