NuTone Fan HD50NT User Manual

Architectural & Engineering Specifications  
February 2008  
DESCRIPTION  
Heavy Duty  
Ceiling/Wall Fan  
MODEL HD50NT  
GRILLE:  
Attractive metal grille finished with white acrylic paint  
Conceals interior  
Low profile blends well with any decor  
Torsion spring grille mounting - no tools required  
BLOWER:  
Plug-in, permanently lubricated, totally enclosed motor  
Centrifugal blower wheel for quiet, efficient performance  
Long life motor bearings  
Designed for continuous operation  
HOUSING:  
Rugged 26-gage galvanized steel construction  
Integral key-holed mounting brackets for easy, secure installa-  
tion directly to joist  
Provision for wire suspension when installed in a drop ceiling  
Tapered, polymeric duct fitting with built-in backdraft damper  
for easy, positive duct connection and no metallic clatter  
U.L. Listed for use over bathtubs and showers when connected  
to a GFCI protected branch wiring.  
DESIGN FEATURES  
Air Delivery:  
Sound Level:  
Dimensions:  
(See back page)  
(See back page)  
Housing: 8¼” long x 8” wide x 5¾” high.  
Grille: 10¼” square x 3/8” thick.  
INSTALLATION  
Material & Finish: Housing: 26-gage galvanized steel.  
U.L. Listed for use over bathtub and showers when connected  
to a GFCI protected branch wiring.  
Grille: White acrylic finished metal.  
Motor:  
Long life bearings, designed for  
continuous operation, 120 VAC, 60 Hz,  
0.4 A.  
Unit installs in ceiling or wall construction.  
Unit mounts on 16” – 24” O.C. joists or studs.  
Blower Wheel:  
Duct Size:  
One-piece, polymeric.  
4” diameter.  
Housing features integral, key-holed mounting brackets for easy,  
secure mounting.  
Housing has collar for 4” round duct, and discharges vertically  
or horizontally.  
ARCHITECT’S SPECIFICATIONS  
Heavy Duty Ceiling/Wall Fan shall be NuTone Model Number  
HD50NT as manufactured by NuTone according to listed speci-  
fications.  
Blower assembly mounts into housing with single screw for quick  
assembly.  
Torsion springs on grille adjust for thickness variances in ceiling  
or wall.  
Fan shall ventilate no less air and create sound levels no greater  
than values listed in the “Performance Ratings” charts on this  
sheet. All air and sound ratings shall be certified by HVI and AMCA  
licensed.  
Use a standard on-off toggle switch (purchase separately).  
Installation Instructions are included with each unit.  
Housing shall be 8¼” x 8” x 5¾” and connect to 4” duct.  
Fan shall be Energy Star® qualified.  
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948  
REFERENCE  
QTY.  
REMARKS  
Project  
Location  
Architect  
Engineer  
Contractor  
Submitted by  
Date  
80B  
99043044C  
 

MTD Lawn Mower Push Mower User Manual
NETGEAR Network Router EX2700 User Manual
Nextar Digital Photo Frame N3 507 User Manual
Omron Scale bf306 User Manual
Oneida Air Systems Dust Collector 5 75 HP Direct Drive Cyclonic Dust Collectors User Manual
Oregon Scientific Thermometer RMR382A User Manual
Panasonic Car Stereo System CQ C7105U User Manual
Panasonic Headphones CY BT100U User Manual
Panasonic Scanner KV SS25G User Manual
Patton electronic Power Supply 2702 G703 User Manual