Nostalgia Electrics Blender MSH 105 User Manual

RETRO MARTINI SHAKER  
MSH-105  
FOR HOUSEHOLD USE ONLY  
READ THESE INSTRUCTIONS BEFORE USING THIS  
UNIT!  
SAVE THESE INSTRUCTIONS!  
 
2
IMPORTANT SAFEGUARDS (Continued)  
12.  
13.  
A unit that is plugged into an outlet should not be left unattended.  
A short power supply cord is provided to reduce the risk resulting from becoming  
entangled or tripping over a long cord.  
14.  
This appliance has a polarized plug (one blade is wider than the other). To  
reduce the risk of electrical shock, this plug is indented to fit into a polarized  
outlet only one way.  
SAVE THESE INSTRUCTIONS!  
ABOUT YOUR RETRO MARTINI SHAKER™  
Thank you for purchasing the RETRO MARTINI SHAKER™. This 50s-styled automatic  
martini shaker will quickly mix martinis and other shaker type cocktail drinks. The RETRO  
MARTINI SHAKER™ is perfect for entertaining! The ability to quickly mix refreshing  
cocktail drinks will provide a fun addition to your family party or group gathering.  
The RETRO MARTINI SHAKER™ includes a 16 ounce shaker with a sieve lid and closed  
cap. The thin upright design requires little counter space and the handsome black and  
silver finish will compliment your room or bar decor. The four rubber suction feet on the  
bottom of the unit keep the RETRO MARTINI SHAKER™ stationery while shaking and  
mixing drinks.  
With your RETRO MARTINI SHAKER™ you can mix any alcohol (Gin, Whiskey, Vodka,  
etc.) with tonic, soda, water or juices to create your favorite cocktail drink.  
This machine is designed for kitchen or home bar use but can be used anywhere .  
The RETRO MARTINI SHAKER™ is easy to use, and requires no assembly. Just follow  
the step by step instructions in the following pages.  
BEFORE FIRST USE  
It is recommended that after unpacking your RETRO MARTINI SHAKER™, you wipe down  
the unit with a clean damp non abrasive sponge or cloth, to remove any post production  
soil or packing debris. Wash the 16 ounce Shaker cup in warm soapy water and towel dry.  
USING YOUR RETRO MARTINI SHAKER™  
1.  
Place your RETRO MARTINI SHAKER™ on a flat, level surface near an  
electrical outlet.  
2.  
Moisten the four suction cups and set the unit into place.  
NOTE: TO RELEASE THE SUCTION CUPS, LIFT UP ON THE FRONT OF THE  
UNIT AND TILT THE UNIT BACKWARD. THE AIR IN THE SUCTION CUPS  
WILL RELEASE.  
3.  
4.  
Plug the electrical cord into the wall outlet making sure the chosen location is  
away from any water source.  
Fill the Shaker cup with your choice of measured liquids, adding ice cubes as  
your recipe states.  
NOTE: You may want to place the cup in the freezer or fill with ice for about 5 or  
10 minutes (and then empty) before adding your liquid.  
 
3
USING YOUR RETRO MARTINI SHAKER™ (Continued)  
5.  
Place the cocktail shaker into the bottom holding ring (at the base of the Retro  
Martini unit) and close and latch the top ring (at the top of the Retro Martini unit).  
Latch the cup into position by placing your hand around the ring and using your  
thumb, pull back on the latch clip while pressing forward – then, as the clip closes  
over the extruding tab - release the clip. This motion locks the martini shaker in  
place. Close the door. (See illustration below)  
6.  
Close the clear protective safety door securely. Turn the safety door handle down  
counter clockwise. The safety door lock is secure, when the blue light goes on at  
the base of the Retro Martini Shaker™.  
NOTE: The unit will not function unless the safety door lock has been secured.  
To open and unlock, turn the safety door handle clockwise to the left and up,  
releasing the safety door lock.  
7.  
Turn the power control knob (the ON/OFF and speed adjustment switch)  
clockwise to power on the RETRO MARTINI SHAKER™ and increase the  
shaking speed. Turn counter clockwise to lower and shut off the unit. Allow unit  
to shake on high for no more then 45 seconds. To remove the shaker cup,  
unlatch the top ring clip, open the ring and remove the cup. Within seconds, you  
should have the desired results - just pour and enjoy!  
Top stabilizing ring  
with latch clip and tab  
Power/Control knob  
Door  
Bottom stabilizing ring  
RETRO MARTINI SHAKER™  
CLEANING  
1.  
2.  
Unplug the unit before cleaning.  
Remove the martini shaker and wash the shaker, sieve and cap in hot soapy  
water. Rinse thoroughly and dry with a soft cloth or towel.  
3.  
The motor unit outer box shell can be easily wiped clean with a non-abrasive  
damp cloth or sponge and dried with soft non abrasive towel.  
NOTE: To prolong the life and visual appearance of your RETRO MARTINI SHAKER™, be  
sure to follow the cleaning instructions after every use. Return your shaker to the stabilizing  
rings and close the cover door. You will be ready for your next cocktail event!  
 
4
RETURNS & WARRANTY  
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN YOU FIRST TAKE IT OUT OF  
THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.  
Should you have any questions, please contact us via email or at the customer service number  
listed below between the hours of 8:00 AM and 5:00 PM, Monday through Friday, Central  
Standard Time.  
Distributed by:  
Nostalgia Products Group LLC  
1471 Partnership Dr.  
Green Bay, WI 54304-5685  
Customer Service  
Phone: (920) 347-9122  
Customer Service Inquiry  
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and fill out the  
Customer Service Inquiry form and click the Submit button. A representative will  
contact you as soon as possible.  
RETRO MARTINI SHAKER™  
MSH-105  
Limited Warranty  
This appliance is designed and built to provide many years of satisfactory performance under  
normal household use. The distributor pledges to the original owner that should there be any  
defects in material or workmanship during the first 90 days of purchase, we will repair or replace  
the unit at our option. Our pledge does not apply to damages caused by shipping, mishandling or  
unit being dropped. A product deemed defective either from manufacturing or being mishandled  
is up to the distributor’s discretion. In order to obtain service under this warranty, please contact  
Nostalgia Products Group, LLC at the telephone number listed above or by filling out the  
This warranty does not apply to re-manufactured merchandise.  
Please read these instructions carefully. Failure to comply with these instructions, damages  
caused by improper replacement parts, abuse or misuse will void this pledge to you and is being  
made in place of all other expressed warranties.  
 
 
 
Nostalgia Products Group LLC  
1471 Partnership Dr.  
Green Bay, WI 54304-5685  
Visit Us Online at  
©2009 Nostalgia Products Group LLC  
Rev. 8/21/09  
 

Miele Freezer F623 Ui 2 User Manual
Mountfield Lawn Mower SP536 User Manual
Mr Coffee Coffeemaker NL4 User Manual
Napoleon Fireplaces Oven OS10 3 User Manual
NEC Server 5800 320Fd User Manual
Oceanic Scuba Diving Equipment 04836716 User Manual
Olympus Carrying Case PT 014 User Manual
Omega Vehicle Security Switch PSW141 series User Manual
Panasonic Car Stereo System CQDF202 User Manual
Panasonic Computer Hardware KX FKN512 User Manual