Nortel Networks Fax Machine Enterprise Edge 20 Voice Messaging Fax User Manual

Enterprise Edge 2.0 Voice Messaging  
FAX User Guide  
© 2000 Nortel Networks  
P0911632 Issue 02  
 
4 Contents  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
Enterprise Edge 2.0 Voice Messaging FAX  
User Guide  
Introduction  
This guide explains how to use Enterprise Edge Voice Messaging FAX with your  
personal mailbox. It explains how to receive, print and send fax messages.  
All Enterprise Edge one line and two line display telephones provide Voice  
Messaging voice prompts. On telephones with display buttons, the voice prompts  
are delayed for five seconds. If you do not see an option on your telephone display,  
wait for the voice prompt to announce the additional options.  
To use FAX features, press the display buttons or the dialpad buttons on your  
telephone.  
When you see a display button like this: PLAY, or a dialpad button like this: ¤,  
press either button to activate the Voice Messaging feature. This guide shows you  
both methods.  
Note: This document explains the Enterprise Edge Voice Messaging features  
related to FAX. If you need instructions about other Voice Messaging  
features, refer to the Enterprise Edge 2.0 Voice Messaging Set Up and  
Operation Guide or the Enterprise Edge 2.0 Voice Messaging Reference  
Guide.  
Learning about FAX  
Enterprise Edge Voice Messaging FAX lets you use Fax features with your  
personal mailbox.  
A fax document in a mailbox is called a fax message. Fax messages can have a  
voice introduction. This means that a caller can leave a fax message in a mailbox  
with or without an introductory voice message. FAX lets a caller leave a fax  
message in a personal mailbox for a mailbox owner. The mailbox owner can:  
retrieve and print the fax message on a fax machine  
forward the fax message to another mailbox.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
   
6 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
About the Express Messaging Line  
An Express Messaging Line can be assigned to a mailbox. A fax message sent to  
the Express Messaging Line bypasses the greeting and the Automated Attendant.  
The fax message is sent immediately to your mailbox. You access the fax message  
the same way you access other fax messages. For more information about accessing  
Ask your System Administrator for the telephone number of your Express  
Messaging Line. Then you can inform people of your direct fax line number.  
Your Personal mailbox greeting  
In your Personal mailbox greeting, you must inform callers that they can leave fax  
messages in your mailbox. Also inform callers that they must call from a fax  
machine telephone to send you a fax message. The caller must press  
START/SEND on the fax machine. Enterprise Edge Voice Messaging  
automatically receives and stores the fax message in your mailbox. For example:  
Hello. You have reached Brian Purdy with Ideal Office Machines. I am in the  
office today, but I am currently away from the phone. Please leave your name,  
telephone number and a brief message after the tone.  
If you want to send me a fax and you are calling from a fax machine telephone,  
press the START/SEND button on the fax machine.”  
For more information about Personal mailbox greetings, refer to the Enterprise  
Edge 2.0 Voice Messaging Set Up and Operation Guide or ask your System  
Administrator.  
Recording a Greeting  
To record a Greeting:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £. Your  
RETRY  
OK  
unique password is assigned when you first open  
your mailbox and perform the initialization steps.  
If you are recording a greeting from a telephone that  
is not assigned to your personal mailbox, press OTHR.  
The display shows the Log: prompt. When this  
prompt appears, enter your mailbox number and  
password. If you are using a one line display  
telephone, press at the Pswd: prompt to reach  
the Log: prompt.  
0 new 0 saved  
PLAY REC  
3. Press ADMIN or °.  
ADMIN  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
       
Enterprise Edge 2.0 Voice Messaging FAX User Guide 7  
Mailbox admin  
GREET PSWD QUIT  
4. Press GREET or ¤.  
Greeting options  
REC CHOOSE CFWD  
5. Press REC or .  
Greeting:  
PRIME ALT  
6. Press PRIME or .  
PERS  
Note: Press ALT to record your Alternate Greeting.  
If you are changing your greeting, your  
current recorded Primary Greeting begins to  
play.  
Record new?  
YES NO  
7. Press YES or .  
QUIT  
Record greeting:  
RETRY  
8. At the tone, record your greeting and  
OK  
press OK or £ to end your recording. Do not use  
Handsfree to record a greeting. For best results,  
speak directly into the telephone handset, clearly and  
at a pace that is easy to understand.  
Note: In your greeting tell callers they can leave a  
fax message in your mailbox. Refer to Your  
Accept greeting?  
9. Press OK or £ to accept the greeting  
RETRY  
PLAY  
OK  
or  
press RETRY or ¤ to erase and re-record the greeting  
or  
press PLAY or to play the greeting.  
10. Press ® to end this session.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
8 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Receiving a fax message  
You can receive two types of fax messages: non-voice introduced and voice  
introduced. An introduction is a voice message that a caller records to introduce a  
fax message. In a non-voice introduced fax message, a caller leaves only a fax  
message.  
A caller can send a fax message to your personal mailbox by using the autosend  
feature on their fax machine. If the call is answered by an Automated Attendant, the  
call transfers to the designated Fax answering extension. If the call is answered by  
a mailbox, the fax message is placed in the mailbox. If the call is answered by a  
person, they hear a fax tone.  
Note: If you answer a call and hear a fax tone, transfer the call to your mailbox by  
pressing ƒ·°fl. The fax message is sent to your mailbox.  
When you receive a message in your mailbox, your telephone display shows:  
Message for you  
MSG  
This display indicates that you have a new voice message or a fax message in your  
mailbox. To check messages you must open your mailbox.  
To open your mailbox:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your mailbox password and press OK or £.  
RETRY  
OK  
1 new 1 saved  
PLAY REC  
3. After you open your mailbox, the telephone display  
shows the number of new and saved messages. In  
this example, there is one new message and one  
saved message. A voice prompt tells you how many  
new and saved fax messages you have.  
ADMIN  
An average text fax message uses 10 seconds of mailbox message time per page. A  
fax message that contains graphics can use as much as two minutes of mailbox  
message time per page. After you print or forward your fax messages, delete them  
from your mailbox.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
   
Enterprise Edge 2.0 Voice Messaging FAX User Guide 9  
Retrieving a fax message  
When you retrieve a fax message, Voice Messaging shows the fax identification  
number on the display. If the message is a voice introduced fax message, the Fax  
identification number plays before the voice message.  
To retrieve your fax messages:  
1. Press PLAY or ¤ to retrieve your new fax messages.  
2. Press until you find the saved fax message you want to print.  
Transferring a Fax call to your mailbox  
If you answer a call while a caller is attempting to leave a fax message in your  
mailbox, you can transfer the call to your mailbox.  
To transfer a fax call to your mailbox:  
1. Press ƒ·°fl. Do not put the call on hold.  
The caller hears your mailbox greeting.  
If you answer your telephone and hear a fax tone, transfer the fax call to your  
mailbox.  
While the call is active:  
1. Press ƒ·°fl. Do not put the call on hold.  
2. Enter your mailbox number.  
The fax message is left in your mailbox.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
   
10 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Setting up a preset fax machine  
Each personal mailbox can have a preset fax machine assigned for printing fax  
messages. If you select the Preset option, fax messages are printed at the same fax  
machine every time.  
To set up the preset fax machine:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
0 new 0 saved  
PLAY REC  
3. Press ADMIN or °.  
ADMIN  
QUIT  
Mailbox admin  
GREET PSWD  
4. Press .  
No Preset  
5. This display appears if there is no preset fax  
machine. If the fax machine is preset, the display  
shows: Preset fax. You have the option to change  
the preset fax telephone number.  
Destination:  
PHONE  
6. Press PHONE or to enter the fax telephone number  
EXT  
OK  
or  
press EXT or ¤ to enter the fax extension number.  
Dest ph:  
RETRY  
7. Enter the fax telephone number and press OK or £.  
<x>  
ADD  
8. Press OK or £ to accept the fax telephone number  
represented by the <x>. Press ADD to add special  
characters to the fax telephone number. For  
information on adding special characters, refer to the  
Enterprise Edge 2.0 Voice Messaging Set Up and  
Operation Guide.  
OK  
Mailbox admin  
GREET PSWD QUIT  
9. Press ® to end the session.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
   
Enterprise Edge 2.0 Voice Messaging FAX User Guide 11  
Printing fax messages  
You can print the fax messages left in your mailbox on any fax machine. You can  
print all of your fax messages at once or print them individually.  
If you print all of the fax messages at once, you cannot listen to any voice  
introductions included with the fax messages. If you do not listen to a voice  
introduction, the fax message remains “new” in your mailbox and you can listen to  
the voice content of the message later.  
If you print each fax message individually, you can listen to the introduction before  
you print the fax message.  
Whether you print all the fax messages at once or individually, use one of these  
three options:  
Preset: prints the fax messages on the preset fax machine that you assign.  
Other: prints the fax messages on the fax machine destination that you assign.  
Manual: requires opening your mailbox from a fax telephone. Locate the fax  
message you want to print and follow the voice prompts. You are prompted to  
press START on the fax machine to receive the fax message. All the fax  
messages are printed on the fax machine you use to access your mailbox.  
Printing new or saved fax messages in your mailbox  
You can print all the new or saved fax messages in your mailbox at once. You have  
three choices of where to print the faxes: Preset, Other or Manual. Fax messages are  
preceded by a cover page if you select the Preset or Other option. A cover page is  
not added if you select the Manual option and print from a mailbox. For more  
information refer to Fax cover page on page 18.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
     
12 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Printing new or saved fax messages on the preset fax machine  
To print all of the new or saved fax messages on the preset fax machine:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR RETRY  
2. Enter your password and press OK or £.  
OK  
ADMIN  
SAVED  
1 new 1 saved  
PLAY  
3. Press .  
REC  
Print all  
NEW  
4. Press NEW or to print all the new fax messages  
or  
press SAVED or ¤ to print all the saved fax  
messages.  
Print msg  
PRESET OTHR MANU  
5. Press PRESET or .  
Note: To send the fax messages to the preset fax  
machine, you must enter the preset fax  
machine telephone number. Refer to Setting  
Printed <x> msgs  
Press ® to end this session.  
For information about changing the preset fax machine, refer to Setting up a preset  
fax machine on page 10. After you end the session, Enterprise Edge Voice  
Messaging prints the fax messages on the preset fax machine.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
Enterprise Edge 2.0 Voice Messaging FAX User Guide 13  
Printing all new or saved fax messages using the Other option  
To print all the new or saved fax messages using the Other option:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
ADMIN  
SAVED  
1 new 1 saved  
PLAY REC  
3. Press to print the fax messages.  
Print all  
NEW  
4. Press NEW or to print all the new fax messages  
or  
press SAVED or ¤ to print all the saved fax  
messages.  
Print msg  
PRESET OTHR MANU  
5. Press OTHR or ¤.  
Destination:  
PHONE  
6. Press PHONE or to enter the fax telephone  
number. Press EXT or ¤ to enter the fax extension  
number.  
EXT  
Dest ph:  
RETRY  
7. Enter the fax telephone number and press OK or £.  
OK  
OK  
<x>  
ADD  
8. Press OK or £ to accept the fax telephone number  
represented here by the <x>. Press ADD to add special  
characters to the fax telephone number. For  
information on adding special characters, refer to the  
Enterprise Edge 2.0 Voice Messaging Set Up and  
Operation Guide.  
Printed <x> msgs  
9. Press ® to end this session.  
After you end the session, Enterprise Edge Voice Messaging prints the fax  
messages on the assigned fax machine.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
14 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Printing all new or saved fax messages using the Manual option  
To use the Manual option, you must first open your personal mailbox from a fax  
machine telephone.  
To retrieve and print all your new or saved fax messages using the Manual option:  
1. From the fax machine telephone, call into a line that is answered by the  
Automated Attendant.  
2. Press ••, or in the UK press °°, to access your mailbox while the  
Automated Attendant Greeting plays.  
3. Enter your mailbox number and password and press £.  
4. Press to print your fax messages.  
5. If you have both new and saved fax messages, you can print either all new or  
saved fax messages. Press to print all new fax messages. Press ¤ to print  
all saved fax messages.  
Note: Step 5 is bypassed if you have only new fax messages or if you have  
only saved fax messages.  
6. Press to use the Manual option to print the new fax messages.  
7. Press START/SEND on the fax machine.  
8. Replace the fax machine telephone handset.  
The session ends when all the faxes are printed.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
Enterprise Edge 2.0 Voice Messaging FAX User Guide 15  
Printing a fax message  
You can print an individual fax message from your mailbox. A cover sheet precedes  
the fax message. Refer to Fax cover page on page 18.  
You have three choices of where to print the fax message: Preset, Other and  
Manual. For more information about fax message printing options, refer to Printing  
Printing a fax message on the preset fax machine  
To print a fax message on the preset fax machine:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
2 new 0 saved  
PLAY REC  
3. Press PLAY or ¤.  
ADMIN  
<date> Fax:1  
<<< STOP >>>  
4. The date received and the Fax ID number appear on  
the display. Press until you find the fax message  
you want to print.  
Note: If the fax message is preceded by a voice  
introduction, wait until the voice introduction  
finishes playing before printing.  
End of message  
COPY ERASE NEXT  
5. Press to print the fax message.  
Print msg  
PRESET OTHR MANU  
6. Press PRESET or . The preset fax machine prints  
the fax message.  
Printed msg  
7. Press ® to end the session.  
For information about changing the preset fax machine, refer to Setting up a preset  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
 
16 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Printing a fax message using the Other option  
To print a fax message using the Other option:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
2 new 0 saved  
PLAY REC ADMIN  
3. Press PLAY or ¤.  
<date> Fax:1  
<<< STOP >>>  
4. The date received and the Fax ID number appear on  
the display. Press until you find the fax message  
you want to print.  
End of message  
COPY ERASE NEXT  
5. Press to print the fax message. If the fax message  
is preceded by a voice introduction, wait until the  
voice introduction finishes playing before  
pressing .  
Print msg  
PRESET OTHR MANU  
6. Press OTHR or ¤.  
Destination:  
PHONE  
7. Press PHONE or to enter the fax telephone number  
EXT  
or  
press EXT or ¤ to enter the fax extension number.  
Dest ph:  
RETRY  
8. Enter the fax telephone number and press OK or £.  
OK  
OK  
<x>  
ADD  
9. Press OK or £ to accept the fax telephone number  
represented here by <x>. Press ADD to add special  
characters to the fax telephone number. For  
information on adding special characters, refer to the  
Enterprise Edge 2.0 Voice Messaging Set Up and  
Operation Guide.  
Printed msg  
10. Press ® to end the session.  
Voice Messaging prints the fax message on the assigned fax machine.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
Enterprise Edge 2.0 Voice Messaging FAX User Guide 17  
Printing a fax message using the Manual option  
To print a fax message using the Manual option, you must first call and open your  
personal mailbox from a fax machine telephone.  
To print a fax message using the Manual option:  
1. Call into a line from the fax machine telephone that is answered by the  
Automated Attendant.  
2. Press ••, or in the UK press °°, to access your mailbox while the  
Automated Attendant Greeting plays.  
3. Enter your mailbox number and password and press £.  
4. Press ¤ to listen to your new messages.  
5. Press to listen to your saved messages. Press until you find the fax  
message you want to print.  
6. Press to print the fax message.  
7. Press to use the Manual option.  
8. Press START/SEND on the fax machine.  
9. Replace the fax machine telephone handset.  
The session ends after the fax message prints on the fax machine you are  
using.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
18 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Fax cover page  
A fax cover page prints with each fax message you print using the Preset and Other  
feature. The fax cover page contains the following information:  
the date and time the fax prints  
the name and telephone number of the mailbox owner  
the destination fax number  
the Fax ID number (if a single fax message is printed)  
the number of pages to follow  
Note: A fax cover sheet is not added if you print a fax from a mailbox and use the  
Manual feature.  
Fax forward cover page  
A fax forward cover page is called a Forward Cover Page. The Forward Cover Page  
contains the same information as a fax cover page and also includes:  
the recipient’s name  
the Fax ID number if the fax is forwarded to an external number  
You can send the same fax message to more than one person, but not to a Group  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
       
Enterprise Edge 2.0 Voice Messaging FAX User Guide 19  
Sending fax messages  
A fax message and a fax message voice introduction can be sent to any personal  
mailbox. To send the fax message you must call the personal mailbox from a fax  
machine telephone.  
To leave a fax message in a personal mailbox:  
1. Place the document that you want to send on the fax machine.  
2. From the fax machine telephone dial the Enterprise Edge telephone number of  
the person you want to send a fax to. Wait for the mailbox greeting or let the  
Voice Messaging operator transfer you to the mailbox to leave a fax message.  
If the person you are calling answers their telephone, tell them to transfer you  
to their mailbox so that you can send a fax.  
3. After the mailbox greeting plays, wait for a beep and record an introduction  
for the fax message. Do not hang up the telephone.  
4. Press START/SEND on the fax machine.  
5. Replace the fax machine telephone handset. This session ends when the  
transmission is complete.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
 
20 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Forwarding a fax message to another mailbox  
You can forward a fax message you have received to another mailbox and add an  
introductory message as a part of the forwarded message. The message appears as  
a fax message in the recipient’s mailbox. If you cannot forward a fax message, ask  
your System Administrator if your mailbox is set up to allow you to forward fax  
messages.  
You can also forward a received Fax Message to an external number. For  
When a fax message is forwarded, a new cover sheet is added to the original fax  
message, becoming part of the new message. However, if the fax message already  
has an Enterprise Edge-generated fax forward cover sheet, it is replaced by a new  
Fax forward cover sheet. For more information, refer to Fax forward cover page on  
To forward a fax message to another mailbox:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
2 new 0 saved  
PLAY REC  
3. Press PLAY or ¤.  
ADMIN  
<date> Fax:1  
<<< STOP >>>  
4. The date received and the Fax ID number appear on  
the display. Press until you find the saved fax  
message you want to forward.  
End of message  
COPY ERASE NEXT  
5. Press COPY or .  
Copy fax  
MBOX  
6. Press MBOX or to forward the fax message to  
OTHR  
NO  
another mailbox.  
Record Intro?  
YES  
7. Press YES or to record an introduction to the fax  
message  
or  
press NO or ¤ and go to step 10 if you do not want  
to record an introduction to the forwarded fax  
message .  
Record message:  
RETRY PAUSE  
8. Record the introduction and press OK or £ to end  
OK  
the recording.  
Note: Press RETRY or to re-record the  
introduction, or press PAUSE or ¤ to pause  
while you record the introduction.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
   
Enterprise Edge 2.0 Voice Messaging FAX User Guide 21  
Accept rec?  
9. Press OK or £ to accept the recording.  
RETRY  
PLAY  
OK  
Mbox:  
DIR  
10. Enter the mailbox number where you want to  
forward the fax message, or press DIR or £ to use  
the Company Directory.  
QUIT  
Wayne, Paul  
11. Press SEND or £ to forward the message without a  
delivery option. Paul Wayne is an example of a  
mailbox owner in this display. Press OPTS or to  
assign message Delivery options Certified, Urgent,  
Private or Timed Delivery.  
OPTS  
CC  
SEND  
QUIT  
Another copy?  
YES  
12. To send this message to another mailbox owner,  
press YES or and repeat steps 6 to 11.  
13. Press QUIT or ® to end this session.  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
22 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Forwarding a fax message to an external number  
You can forward a received fax message to an external number. However, you  
cannot add an introductory message to the fax message.  
To forward a fax message to an external number:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
2 new 0 saved  
PLAY REC  
3. Press PLAY or ¤.  
ADMIN  
<date> Fax:1  
<<< STOP >>>  
4. The date received and the Fax ID number appear on  
the display. Press until you find the fax message  
you want to forward.  
End of message  
COPY ERASE NEXT  
5. Press COPY or .  
Copy fax  
MBOX  
6. Press OTHR or ¤.  
OTHR  
OK  
Name:  
RETRY  
7. You are prompted to enter the recipient’s name. The  
name can be a maximum of eight characters. Using  
the telephone dialpad, enter the name of the recipient.  
After each letter, press £ to enter the next letter. If  
there is an error in the name, press RETRY and re-  
enter the name. Press OK to accept the name.  
For more information about using the dialpad, refer  
to the Enterprise Edge 2.0 Voice Messaging  
Reference Guide.  
BKSP  
Destination:  
PHONE  
8. Press PHONE or to enter the fax telephone  
number. Press EXT or ¤ to enter the fax extension  
number.  
EXT  
Dest ph:  
RETRY  
9. Enter the fax telephone number and press OK or £.  
OK  
OK  
<x>  
ADD  
10. Press OK or £ to accept the fax telephone number  
represented here by <x>. Press ADD to add special  
characters to the fax telephone number. For  
information on adding special characters, refer to the  
Enterprise Edge 2.0 Voice Messaging Set Up and  
Operation Guide.  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
   
Enterprise Edge 2.0 Voice Messaging FAX User Guide 23  
Msg sent  
11. Voice Messaging forwards the fax message.  
Another copy?  
YES  
12. Press YES or and repeat steps 6 to 11 to send this  
QUIT  
message to another external number.  
13. Press QUIT or ® to end this session.  
Fax System Group message (Fax Broadcast)  
Send a Fax System Group message if you want to send a group a fax message that  
pertains to them. All Fax System Group Lists are created by the System  
Administrator.  
About the Fax System Group List  
A Fax System Group List is a collection of fax machines at other locations. When  
you send a fax message to a Fax System Group List, each fax machine in the Fax  
System Group List receives the same fax message. Ask your System Administrator  
for a list of fax machines in each Fax System Group List.  
If you need a Fax System Group List, ask your System Administrator to create one  
for you. When you give the System Administrator the information, include:  
the names of the recipients  
a list of the fax machine numbers  
the Fax System Group List name  
P0911632 Issue 02  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
 
   
24 Enterprise Edge 2.0 Voice Messaging FAX User Guide  
Sending a Fax System Group message (Fax Broadcast)  
Before you send a Fax System Group message, be sure your System Administrator  
adds the Fax System Group List, and the List contains all the fax machines that are  
to receive the fax message.  
To send a Fax System Group message from your Enterprise Edge telephone:  
1. Press ƒ·°⁄.  
Pswd:  
OTHR  
2. Enter your password and press OK or £.  
RETRY  
OK  
2 new 0 saved  
PLAY REC  
3. Press PLAY or ¤.  
ADMIN  
<date> Fax:1  
<<< STOP >>>  
4. The date received and the Fax ID number appear on  
the display. Press until you find the fax message  
you want to forward.  
End of message  
COPY ERASE NEXT  
5. Press COPY or .  
Copy fax  
MBOX  
6. Press MBOX or to forward the fax message to  
OTHR  
NO  
another mailbox.  
Record Intro?  
YES  
7. Press NO or ¤.  
Note: Fax Group List recipients do not hear the  
voice introduction.  
Mbox:  
DIR  
8. Enter the Fax System Group List number.  
QUIT  
SEND  
<GList name>  
OPTS  
9. Press SEND or £ to send the fax message.  
Press OPTS or to assign message Delivery options  
Certified, Urgent, Private or Timed Delivery.  
Press CC to send the message to another recipient.  
Press ® to end this session.  
CC  
Enterprise Edge 2.0 Voice Messaging FAX User Guide  
P0911632 Issue 02  
 
 

MTD Blower 692 thru 693 User Manual
MTX Audio Stereo Amplifier TA3202 User Manual
Multiquip Outboard Motor CV1A User Manual
Murray Trimmer TM6100X5A User Manual
Nextar Digital Photo Frame N7 107 User Manual
Nextar GPS Receiver ME User Manual
Nilfisk Advance America Vacuum Cleaner IVB 3 H User Manual
Nokia Cell Phone 21XX User Manual
Nortel Networks Answering Machine P0911621 User Manual
Palm Cell Phone P120EWW User Manual