Nokia Headphones BH 804 User Manual

Nokia Bluetooth Headset BH-804  
User Guide  
9210506  
Issue 1 EN  
 
Export controls  
This device may contain commodities, technology or software subject to export laws and  
regulations from the US and other countries. Diversion contrary to law is prohibited.  
9210506/Issue 1 EN  
 
Contents  
1. Introduction ......................... 5 3. Basic use............................. 12  
Bluetooth wireless technology........... 5  
Place the headset on the ear........... 12  
Carry the headset in the strap ........ 13  
Calls ........................................................ 13  
Adjust the volume............................... 14  
Switch a call between headset  
2. Get started ........................... 7  
Keys and parts......................................... 7  
Chargers.................................................... 7  
Charge the battery ................................ 8  
Switch the headset on or off.............. 9  
Pair the headset .................................. 10  
Disconnect the headset................. 11  
Reconnect the headset.................. 11  
Troubleshooting............................... 11  
and mobile device............................... 14  
Clear settings or reset........................ 15  
4. Battery information........... 16  
Care and maintenance........... 18  
4
 
I n t r o d u c t i o n  
1. Introduction  
With the Nokia Bluetooth Headset BH-804, you can make and answer  
calls while on the move. You can use the headset with compatible devices  
that support Bluetooth wireless technology.  
Read this user guide carefully before using the headset. Also, read the  
user guide for your mobile device that you connect to the headset. For  
website.  
This product may contain small parts. Keep them out of the reach of small  
children.  
Bluetooth wireless technology  
Bluetooth wireless technology allows you  
to connect compatible devices without  
cables. The headset and the other device  
<10m  
do not need to be in line of sight, but they  
should be within 10 metres (33 feet) of  
each other. The closer the headset and  
the other device are to each other, the  
better is the performance. The optimal  
operating range is shown in dark grey in  
the picture. The connection is subject to  
5
 
   
I n t r o d u c t i o n  
interference from distance and obstructions (shown in light grey) or other  
electronic devices.  
The headset is compliant with the Bluetooth Specification 2.0 + EDR  
supporting the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with  
the manufacturers of other devices to determine their compatibility with  
this device.  
6
 
G e t s t a r t e d  
2. Get started  
Keys and parts  
The headset contains the following parts:  
1. Earpiece  
1
2. Indicator light  
2
6
4
5
3. Volume keys  
3
4. Multifunction key  
5. Earloop holder  
6. Earloop  
8
7
7. Microphone  
8. Charging contacts  
Before using the headset, you must charge the battery and pair the  
headset with a compatible device.  
Parts of the headset, desk stand, and charger adapter are magnetic. Metallic  
materials may be attracted to these devices. Do not place credit cards or other  
magnetic storage media near these devices, because information stored on them  
may be erased.  
Chargers  
This device is intended for use when supplied with power from the AC-6 and DC-6  
chargers.  
7
 
     
G e t s t a r t e d  
Warning: Use only chargers approved by Nokia for use with this  
particular enhancement. The use of any other types may invalidate any  
approval or warranty, and may be dangerous.  
When you disconnect the power cord of any enhancement, grasp and pull the plug,  
not the cord.  
Charge the battery  
Before charging the battery, carefully read “Battery information”, p. 16.  
1. Connect the charger to a wall outlet.  
2. To charge the headset in the desk stand (if  
provided with the headset), connect the  
2
charger cable to the charger connector at the  
side of the desk stand (1), and place the lower  
end of the headset into the slot on the desk  
stand (2). The headset switches off.  
1
To charge the headset using the charger  
adapter (if provided with the headset),  
connect the charger cable to the charger  
2
1
connector on the adapter (1), and insert  
the lower end of the headset into the  
adapter (2). The headset switches off.  
Tip: To keep the adapter attached to the charger cable, push the  
cable into the slot on the adapter.  
8
 
 
G e t s t a r t e d  
The red indicator light is displayed during charging. Charging the  
battery fully may take up to 1 hour with the AC-6 or DC-6 charger.  
3. When the battery is fully charged, the green indicator light is  
displayed. Remove the headset from the desk stand or remove the  
adapter.  
4. Disconnect the charger from the wall outlet.  
The battery can also be charged through the USB port of a compatible PC  
using the Nokia Connectivity Cable CA-101 (sold separately). Connect one  
end of the cable to the desk stand or charger adapter and the other end to  
the USB port on the PC.  
The fully charged battery has power for up to 4 hours of talk time or up to  
150 hours of standby time.  
When the battery is discharged, the headset beeps about every minute,  
and the red indicator light flashes.  
Switch the headset on or off  
To switch on, press and hold the multifunction key for about 2 seconds.  
The headset beeps, and the green indicator light is displayed. The headset  
first tries to connect to the last used mobile device and then, if the  
connection fails, to one of the other paired devices. When the headset is  
connected to a device and is ready for use, the blue indicator light flashes  
slowly. If the headset has not been paired with a device, it automatically  
enters the pairing mode (see “Pair the headset”, p. 10).  
To switch off, press and hold the multifunction key for about 4 seconds.  
The headset beeps, and the red indicator light is briefly displayed. If the  
9
 
 
G e t s t a r t e d  
headset is not connected to a device within about 30 minutes, it switches  
off automatically.  
Pair the headset  
1. Ensure that your mobile device is on and the headset is off.  
2. To pair the headset if it has not been previously paired with a device,  
switch on the headset. The headset enters the pairing mode, and the  
blue indicator light starts to flash quickly.  
To pair the headset if it has been previously paired with another  
device, ensure that the headset is switched off, and press and hold the  
multifunction key (for about 4 seconds) until the blue indicator light  
starts to flash quickly.  
3. Activate the Bluetooth feature on your device, and set it to search for  
Bluetooth devices. For details, see the user guide of your device.  
4. Select the headset (Nokia BH-804) from the list of found devices.  
5. Enter 0000 to pair and connect the headset to your device, if your  
device asks you to do so. In some devices, you may need to make the  
connection separately after pairing. For details, see the user guide of  
your device.  
If pairing is successful, the headset appears in the menu of the mobile  
device where you can view the currently paired Bluetooth devices.  
When the headset is connected to your device and is ready for use, the  
blue indicator light flashes slowly.  
10  
 
 
G e t s t a r t e d  
Disconnect the headset  
To disconnect the headset from your mobile device, switch off the  
headset, or disconnect it in the Bluetooth menu of the device.  
You do not need to delete pairing with the headset to disconnect it.  
Reconnect the headset  
If you disconnect the headset from your mobile device, you can reconnect  
the headset to the device without switching the headset off and back on.  
Press and hold the multifunction key for about 2 seconds, or make the  
connection in the Bluetooth menu of your device.  
You may be able to set your mobile device so that the headset connects to  
it automatically. To activate this feature in a Nokia device, change the  
paired device settings in the Bluetooth menu.  
Troubleshooting  
If you cannot connect the headset to your mobile device, ensure the  
following:  
• The headset is charged, switched on, and paired with your device.  
• The Bluetooth feature is activated on your device.  
• The headset is within 10 metres (33 feet) of your device and that there  
are no obstructions between the headset and the device, such as walls,  
or other electronic devices.  
11  
 
     
B a s i c u s e  
3. Basic use  
Place the headset on the ear  
The headset is provided with an earloop that you can use for a better fit  
on your ear.  
To use the headset without the earloop, gently push the earpiece into your  
ear (1), and point the headset toward your mouth.  
To use the headset with the earloop, insert the earloop holder into the slot  
at the base of the earpiece (2), and insert the earloop into the opening on  
the holder (3). To wear the headset on the right ear, rotate the earloop so  
that the loop is to the right of the Nokia logo. Slide the earloop over your  
ear (4), and push or pull the earloop to set its length. Gently push the  
earpiece into your ear, and point the headset toward your mouth (5).  
1
2
4
5
3
To use the headset on the left ear, rotate the earloop so that it is to the  
left of the Nokia logo (6).  
12  
 
   
B a s i c u s e  
6
To detach the earloop, gently pull it from the headset.  
Carry the headset in the strap  
The headset may be provided with a carrying strap. You  
can use the strap to wear the headset around your neck.  
To attach the headset to the strap, insert the headset into  
the catch at the end of the strap.  
To detach the headset, pull it from the catch.  
Calls  
To make a call, use your mobile device in the normal way  
when the headset is connected to it. The blue indicator light flashes  
during the call.  
13  
 
   
B a s i c u s e  
To redial the number you last called (if your mobile device supports this  
feature with the headset), when no call is in progress, press the  
multifunction key twice.  
To activate voice dialling (if your mobile device supports this feature with  
the headset), when no call is in progress, press and hold the multifunction  
key for about 2 seconds until the mobile device starts voice dialling, and  
proceed as described in the user guide of the device.  
When you receive a call, the blue indicator light flashes quickly, and you  
hear a ringing tone through the headset. To answer the call, press the  
multifunction key, or use the keys of the mobile device. To reject the call,  
press the multifunction key twice, or use the keys of the mobile device.  
To end a call, press the multifunction key, or use the keys of the mobile  
device.  
Adjust the volume  
To adjust the headset volume, press either volume key.  
Switch a call between headset and mobile device  
To switch a call from the headset to a connected device, press and hold  
the multifunction key for about 4 seconds (the headset switches off), or  
use the keys of your device.  
To switch the call back to the headset, switch on the headset (and  
connect it to your paired device), or press and hold the multifunction key  
for about 2 seconds (when the headset is switched on).  
14  
 
   
B a s i c u s e  
Clear settings or reset  
To clear all the pairing settings from the headset, switch off the headset,  
and press and hold the multifunction key (for over 8 seconds) until the  
red, green, and blue indicator lights start to alternate. After the settings  
are cleared, the headset enters the pairing mode.  
To reset the headset if it stops functioning, even though it is charged,  
connect the headset to a charger that is plugged into a wall outlet (see  
“Charge the battery”, p. 8). The reset does not clear the pairing settings.  
15  
 
 
B a t t e r y i n f o r m a t i o n  
4. Battery information  
This device has an internal, nonremovable, rechargeable battery. Do not attempt to  
remove the battery from the device as you may damage the device. The battery can  
be charged and discharged hundreds of times, but it will eventually wear out.  
Recharge your battery only with Nokia approved chargers designated for this  
device. Use of an unapproved charger may present a risk of fire, explosion, leakage,  
or other hazard.  
If a battery is being used for the first time or if the battery has not been used for a  
prolonged period, it may be necessary to connect the charger, then disconnect and  
reconnect it to begin charging the battery. If the battery is completely discharged,  
it may take several minutes before the charging indicator light is displayed.  
Unplug the charger from the electrical plug and the device when not in use. Do not  
leave a fully charged battery connected to a charger, since overcharging may  
shorten its lifetime. If left unused, a fully charged battery will lose its charge over  
time.  
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme  
temperatures reduce the capacity and lifetime of the battery. A device with a hot or  
cold battery may not work temporarily. Battery performance is particularly limited  
in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also  
explode if damaged.  
Never use any charger that is damaged.  
Important: Battery talk and standby times are estimates only and depend  
on network conditions, features used, battery age and condition,  
temperatures to which battery is exposed, and many other factors. The  
16  
 
 
B a t t e r y i n f o r m a t i o n  
amount of time a device is used for calls will affect its standby time. Likewise, the  
amount of time that the device is turned on and in the standby mode will affect its  
talk time.  
17  
 
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The following suggestions will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture  
can contain minerals that will corrode electronic circuits. If your device does  
get wet, allow it to dry completely.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the  
device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
These suggestions apply equally to your device, charger, or any enhancement. If any  
device is not working properly, take it to the nearest authorised service facility for  
service.  
18  
 
 
C a r e a n d m a i n t e n a n c e  
Disposal  
The crossed-out wheeled-bin symbol on your product, literature, or  
packaging reminds you that all electrical and electronic products, batteries,  
and accumulators must be taken to separate collection at the end of their  
working life. This requirement applies to the European Union and other locations  
where separate collection systems are available. Do not dispose of these products  
as unsorted municipal waste.  
By returning the products to collection you help prevent uncontrolled waste  
disposal and promote the reuse of material resources. More detailed information is  
available from the product retailer, local waste authorities, national producer  
responsibility organizations, or your local Nokia representative. For the product  
Eco-Declaration or instructions for returning your obsolete product, go to country-  
19  
 

Miele Clothes Dryer T4662 C User Manual
Miller Electric Welding System Big 40 C User Manual
MSC Computer Hardware CX MB EVA2 User Manual
Nady Systems Stereo Amplifier dig comp 16 User Manual
New Holland Lawn Mower G4010 User Manual
Niles Audio Speaker RS6 Series User Manual
NordicTrack Treadmill NTL15922 User Manual
Oki All in One Printer 1145 MFP User Manual
ParaBody Home Gym 842 User Manual
ParaBody Home Gym 867101 User Manual