Nokia Headphones BH 801 User Manual

Nokia Bluetooth Headset BH-801  
User Guide  
9253977  
Issue 1  
 
The availability of particular products may vary by region. Please check with the Nokia dealer  
nearest to you.  
Unauthorized changes or modifications to this device may void the user's authority to operate  
the equipment.  
Export Controls  
This device may contain commodities, technology or software subject to export laws and  
regulations from the US and other countries. Diversion contrary to law is prohibited.  
9253977/Issue 1 EN  
 
Contents  
Place the headset over your ear ..... 12  
Use the headset with  
1.Introduction ......................... 5  
Bluetooth wireless technology........... 5  
a strap or a clip.................................... 13  
Call handling ........................................ 14  
Adjust the earphone volume............ 15  
Mute or unmute the microphone... 15  
Switch the call between  
the phone and headset...................... 15  
Use the headset with  
several phones ..................................... 15  
Clear the settings................................ 16  
2.Get started ........................... 7  
Overview................................................... 7  
Chargers.................................................... 7  
Charge the battery ................................ 8  
Switch the headset on or off.............. 9  
Pair the headset with  
a compatible phone............................... 9  
Disconnect the headset................. 10  
Reconnect the headset.................. 10  
Troubleshooting................................... 10  
4. Battery information........... 17  
Care and maintenance........... 18  
3.Basic use............................. 12  
4
 
I n t r o d u c t i o n  
1. Introduction  
The Nokia Bluetooth Headset BH-801 allows you the freedom to make  
and receive calls while on the move or in the office. You can connect the  
headset to a compatible phone that supports Bluetooth wireless  
technology.  
Read this user guide carefully before using the headset. Also read the user  
guide for your phone, which provides important safety and maintenance  
information. Keep the headset and its accessories out of reach of small  
children.  
Bluetooth wireless technology  
Bluetooth wireless technology allows  
you to connect compatible devices  
without cables. A Bluetooth  
<10m  
connection does not require that the  
phone and the headset be in line of  
sight, but the maximum distance  
between the devices is 10 meters (30  
feet). The closer the phone and the  
headset are to each other, the better is  
the performance. The optimal  
operating range is shown in dark grey  
in the picture. The connection is subject to interference from distance and  
obstructions (shown in light grey) or other electronic devices.  
5
 
   
I n t r o d u c t i o n  
The headset is compliant with the Bluetooth Specification 2.0 + EDR that  
supports the following profiles: Headset Profile 1.1 and Hands-Free  
Profile 1.5. Check with the manufacturers of other devices to determine  
their compatibility with this device.  
There may be restrictions on using Bluetooth technology in some  
locations. Check with your local authorities or service provider.  
6
 
G e t s t a r t e d  
2. Get started  
Overview  
The headset contains the following parts:  
• Indicator light (1)  
• Power key (2)  
• Answer/end key (3)  
• Volume key (4)  
• Charger connector (5)  
• Microphone (6)  
• Earloop (7)  
• Earpiece (8)  
Before using the headset, you must charge the battery and pair the  
headset with a compatible phone.  
Note: Parts of the headset are magnetic. Metallic materials may be  
attracted to the headset. Do not place credit cards or other magnetic  
storage media near the headset, because information stored on them  
may be erased.  
Chargers  
Check the model number of any charger before using it with this headset. The  
headset is intended for use with the AC-3, AC-4, and DC-4 chargers.  
7
 
     
G e t s t a r t e d  
Warning: Use only chargers approved by Nokia for use with this  
particular enhancement. The use of any other types may invalidate any  
approval or warranty, and may be dangerous.  
For availability of approved enhancements, please check with your dealer. When  
you disconnect the power cord of any enhancement, grasp and pull the plug, not  
the cord.  
Charge the battery  
This device has an internal, nonremovable, rechargeable battery. Do not  
attempt to remove the battery from the device as you may damage the  
device.  
1. Connect the charger to a wall outlet.  
2. Connect the charger cable to the headset.  
The red indicator light is displayed during  
charging. It may take a while before  
charging starts. If charging does not start,  
disconnect the charger, plug it in again,  
and retry. Charging the battery fully may  
take up to 2 hours.  
Ensure that you do not accidentally insert the  
earloop into the charger connector.  
3. When the battery is fully charged, the red  
indicator light turns off. Disconnect the charger  
from the headset and the wall outlet.  
8
 
 
G e t s t a r t e d  
The fully charged battery has power for up to 6 hours of talk-time or up to  
160 hours of standby time. However, the talk and standby times may vary  
when used with different mobile phones or other compatible Bluetooth  
devices, usage settings, usage styles, and environments.  
When battery power is low, the headset beeps, and the red indicator light  
starts to flash.  
Switch the headset on or off  
To switch on, press and hold the power key. The headset beeps, and the  
green indicator light is displayed briefly. When the headset is connected  
to a paired phone and is ready for use, the blue indicator light flashes  
slowly. If the headset is not connected to a phone, the green indicator  
light flashes slowly.  
To switch off, press and hold the power key. The headset beeps, and the  
red indicator light is displayed briefly.  
Pair the headset with a compatible phone  
1. Switch on your phone and the headset.  
2. Activate the Bluetooth feature on the phone, and set the phone to  
search for Bluetooth devices. See the user guide of your phone for  
instructions.  
3. Select the headset (Nokia BH-801) from the list of found devices.  
4. Enter the Bluetooth passcode 0000 to pair and connect the headset to  
your phone. In some phones you may need to make the connection  
9
 
   
G e t s t a r t e d  
separately after pairing. See the user guide of your phone for details.  
You only need to pair the headset with your phone once.  
If the pairing is successful, the headset beeps and appears in the phone  
menu where you can view the currently paired Bluetooth devices.  
Disconnect the headset  
To disconnect the headset from your phone (for example, to connect the  
phone to another Bluetooth device), switch off the headset or disconnect  
it in the Bluetooth menu of your phone.  
You do not need to delete the pairing with the headset to disconnect it.  
Reconnect the headset  
To connect the headset to your phone, switch on the headset, make the  
connection in the Bluetooth menu of your phone, or press and hold the  
answer/end key.  
You can set your phone to connect with the headset automatically when  
the headset is switched on. To do this in Nokia phones, change your paired  
device settings in the Bluetooth menu.  
Troubleshooting  
If you cannot connect the headset to your phone, do the following:  
• Ensure that the headset is charged, switched on, and paired with your  
phone.  
• Ensure that the Bluetooth feature is activated on your phone.  
10  
 
     
G e t s t a r t e d  
• Check that the headset is within 10 meters (30 feet) of your phone and  
that there are no obstructions between the headset and the phone,  
such as walls, or other electronic devices.  
• To reset the headset if it stops functioning, although it is charged, plug  
the headset into a charger, and briefly press the power key and the  
middle of the volume key. This reset does not clear your settings (for  
example, pairing settings).  
11  
 
B a s i c u s e  
3. Basic use  
Place the headset over your ear  
The headset is provided with an earloop that you can use for a better fit  
on your ear.  
To use the headset without the earloop, plug the earpiece into your ear  
(1), and point the headset toward your mouth.  
To use the headset with the earloop, insert the earloop into the small  
opening at the back of the headset (2). To wear the headset on the right  
ear, rotate the earloop so that the loop is to the right of the Nokia name.  
Slide the earloop over your ear (3), and push or pull the earloop to set its  
length (4). Set the headset so that it points toward your mouth.  
12  
 
   
B a s i c u s e  
To use the headset on the left ear, rotate the earloop so that the loop is to  
the left of the text (5).  
To detach the earloop (for example, to clean it), gently pull it from the  
headset.  
Use the headset with a strap or a clip  
The headset is supplied with a strap and a clip. When you do not keep the  
headset on your ear, you can wear it on your neck using the strap or  
attach it to your clothing using the clip.  
To fix the headset to the catch, insert the headset (1), and gently push it  
downwards (2) until it locks into place. To detach the headset, slide it out  
through the catch (3).  
13  
 
 
B a s i c u s e  
To use the clip instead of the strap, pull the strap from the catch (4) and  
push the clip to the catch (5).  
2
3
1
5
4
Call handling  
To make a call, use your phone in the normal way when the headset is  
connected to your phone. The blue indicator light flashes slowly during  
the call.  
If your phone supports last number redialing with this device, briefly press  
the answer/end key twice when no call is in progress. When you press the  
answer/end key, always press the middle of the key.  
If your phone supports voice dialing with this device, press and hold the  
answer/end key when no call is in progress, and proceed as described in  
the user guide of your phone.  
When you receive a call, the blue indicator light flashes quickly, and you  
hear a ringing tone through the headset. To answer the call, press the  
14  
 
 
B a s i c u s e  
answer/end key, or use the phone keys. If the automatic answer function  
is set to on in your phone, the phone automatically answers the incoming  
call after one ring.  
To reject an incoming call, briefly press the answer/end key twice, or use  
the phone keys.  
To end a call, press the answer/end key, or use the phone keys.  
Adjust the earphone volume  
Press the volume key up to increase or down to decrease the volume  
during a call. To adjust the volume quickly, press and hold the key in the  
desired direction.  
Mute or unmute the microphone  
To mute or unmute the microphone during a call, briefly press the middle  
of the volume key. A long tone sounds.  
Switch the call between the phone and headset  
To switch the call between the headset and a compatible phone, press and  
hold the answer/end key, or use the respective function in your phone.  
Use the headset with several phones  
You can pair the headset with up to eight phones but connect it to only  
one phone at a time.  
15  
 
       
B a s i c u s e  
The phone that was first paired with the headset is the default phone. If  
the headset is switched on within 10 meters (30 feet) of several paired  
phones, the headset tries to connect to the default phone.  
If the headset cannot connect to the default phone, the headset tries to  
connect to the last used phone. If the headset cannot connect to this  
phone either, one of the other six paired phones can be connected to the  
headset. To make the connection, see the user guide of your phone.  
Clear the settings  
If you want to clear all the settings from the headset (for example, the list  
of paired devices), press and hold the power key and the volume key up for  
10 seconds. After the settings are cleared, the headset beeps twice, and  
the indicator lights alternate for several seconds.  
16  
 
 
B a t t e r y i n f o r m a t i o n  
4. Battery information  
Your device is powered by a rechargeable battery. The battery can be charged and  
discharged hundreds of times, but it will eventually wear out. Recharge your  
battery only with Nokia approved chargers designated for this device.  
Unplug the charger from the electrical plug and the device when not in use. Do not  
leave a fully charged battery connected to a charger, since overcharging may  
shorten its lifetime. If left unused, a fully charged battery will lose its charge over  
time.  
Never use any charger that is damaged.  
Leaving the device in hot or cold places, such as in a closed car in summer or winter  
conditions, will reduce the capacity and lifetime of the battery. Always try to keep  
the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold  
battery may not work temporarily, even when the battery is fully charged. Battery  
performance is particularly limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also  
explode if damaged. Dispose of batteries according to local regulations. Please  
recycle when possible. Do not dispose as household waste.  
17  
 
 
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you protect your warranty  
coverage.  
Keep all accessories and enhancements out of the reach of small children.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture  
can contain minerals that will corrode electronic circuits. If your device does  
get wet, allow it to dry completely.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the  
device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
All of the above suggestions apply equally to your device, battery, charger, or any  
enhancement. If any device is not working properly, take it to the nearest  
authorized service facility for service.  
18  
 
 

MTD Snow Blower Series 140 thru 152 User Manual
NEC Computer Monitor EA191M User Manual
Nortel Networks Telephone P0609347 02 User Manual
O2 Innovations CRT Television 3800TW User Manual
Optoma Technology Projector TX775 User Manual
Oricom Conference Phone CARE90 User Manual
Oster Waffle Iron CKSTWF2502 2500 User Manual
Panasonic CRT Television CQ VD5005W User Manual
Panasonic Network Card MAZ9xxxH Series User Manual
Panasonic Scanner KV S1020C User Manual