Nintendo Computer Hardware GIC430F User Manual

®
3-Port Hi-Speed FireWire PCI Card  
GIC430F Quick Start Guide  
Read this guide thoroughly and follow the installation and operation procedures  
carefully to prevent any damage to the unit and/or any of the devices it connects to.  
GIC430F package contains:  
1 3-Port Hi-Speed FireWire® PCI card  
1 Quick Start Guide  
1 Warranty/Registration Card  
Copyright © 2003 IOGEAR  
All brand names and trademarks are the registered  
property of their respective owners  
®
PKG-M0075/QS  
 
2. Hardware Requirements  
Minimum System Requirements  
Macintosh  
• PowerMac G3 (Blue & White Tower) or later  
• Mac OS v8.6 or higher  
• 32MB of RAM  
• Available PCI Slot  
PC  
• Pentium® or K6® – class processor (266Mhz or higher)  
• Windows 98 Second Edition or later  
• 32MB of RAM  
• Available PCI Slot  
Recommended System Requirements  
Macintosh  
• PowerMac G4 1.0Ghz or higher  
• Mac OSX 10.2.5 (Jaguar) or later  
• 256MB RAM  
• Available PCI Slot  
PC  
• AMD Athlon® 2100+ or Intel Pentium® 4 2.0Ghz Processor  
• Microsoft Windows XP or later  
• 256MB RAM  
• Available PCI Slot  
3. Features  
Product Features  
• Three External FireWire® Ports  
• Supports FireWire® Data Transfer Rates of up to 400Mbps  
• Built to Industry-Standard IEEE 1394 and 1394OHCI v1.0 specifications  
• Ultra-easy Plug-n-Play Installation – No drivers necessary!  
• Backed by IOGEAR’s Industry-leading 3-Year Factory Warranty!  
 
4. Installing the PCI Card  
Warning!  
Carelessness in installing this device can result in permanent damage to your  
computer, and will void your warranty. Please use care anytime you open your Mac  
or PC, and follow the manufacturer’s guidelines for proper handling procedures.  
Step. 1  
Shut down your computer  
Warning! - Always shut down your computer before opening it to avoid damaging  
its internal components, or the components you want to install. Do not open the  
computer or attempt to install items inside it while it is turned on. After shutting  
down your computer, the internal components can be very hot. Let the computer  
cool down before continuing.  
Step. 2  
Wait five to ten minutes to allow the computer's internal components to cool.  
Step. 3  
Unplug all the cables from the computer, except the power cord.  
Step. 4  
Open your computer's case.  
Step. 5  
Locate an open PCI slot within your computer.  
Step. 6  
Use a non-magnetic screwdriver to unscrew and remove the PCI slot's metal cover.  
 
Step. 7  
®
Slide the IOGEAR 3-Port Hi-Speed FireWire PCI Card into the open PCI slot.  
Step. 8  
®
Install the locking-screw to secure the IOGEAR 3-Port Hi-Speed FireWire PCI  
Card into the computer, then close the computer.  
5. Software Installation  
FOR WINDOWS® 98SE & ME  
Step. 1  
Boot your computer into the Windows Operating System.  
Step. 2  
Insert your Windows 98 or ME Installation CD-ROM into your computer.  
NOTE: If your computer came pre-installed with either Windows 98 or Windows ME, the CD-ROM  
files will be copied to your Hard Drive, and the installation CD-ROM will not be necessary.  
Step. 3  
The Add New Hardware wizard will appear. Click “Next” to continue.  
Step. 4  
In the next dialog box that comes up, leave the default folder choice for FireWire®  
(IEEE 1394 Controller). Typically, it should be (for Win98) D:\WIN98 or D:\WIN9X\  
(“D” for which drive letter the CD-ROM is).  
 
Step. 5  
When the installation is completed, click “Finish”. Your computer may ask you to  
reboot.  
Step. 6  
Once you have rebooted, your FireWire® Combo PCI card is ready for operation.  
FOR WINDOWS® 2000 & XP  
Your Windows 2000/XP operating system natively supports the FireWire® PCI  
card – No drivers are necessary!  
However, please ensure you have the latest Service Packs installed…  
• Windows 2000 – Service Pack 2 or later  
• Windows XP – Service Pack 1 or later  
FOR MACINTOSH – OS 8.6 THRU OS 9.X  
Step. 1  
Ensure you have the following extensions installed on your Mac. The PCI card will  
not function without the following extensions installed.  
• Apple FireWire® Support v2.5 or later  
All extensions can be obtained from the following web sites:  
• Run the Software Update utility under the Apple Menu.  
 
Step. 2  
If all updates are installed properly, your Mac will take advantage of the FireWire®  
capabilities of the IOGEAR FireWire® PCI card.  
FOR MACINTOSH – OSX 10.1.5 AND ABOVE  
The IOGEAR 3-Port Hi-Speed FireWire® PCI card is natively supported within the  
OS X operating system; no extensions are necessary!  
®
To ensure your 3-Port Hi-Speed FireWire PCI card is installed properly, check the  
Apple System Profiler (under PCI Cards) that it is being detected.  
 
6. Radio and TV Interference  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation  
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR  
THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION.  
7. Warranty  
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT,  
DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.  
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect  
to the contents or use of this documentation, and especially disclaims its quality, performance,  
merchantability, or fitness for any particular purpose.  
The direct vendor also reserves the right to revise or update the device or documentation without  
obligation to notify any individual or entity of such revisions, or updates. For further inquiries please  
contact your direct vendor.  
 

Multiquip Portable Generator DCA 25SSIU2 User Manual
Numark Industries CD Player AXIS 8 Premium User Manual
Omega Engineering Barcode Reader OM DAQ USB 2401 User Manual
Onkyo Stereo System TX DS696 User Manual
Oreck Vacuum Cleaner U4140HH User Manual
Oregon Scientific Clock Radio RRA320P User Manual
Ozaki Worldwide Speaker EM928 User Manual
Palm Cell Phone GSM 1800 User Manual
Panasonic Air Compressor DA57C84RCU6 User Manual
Patton electronic Network Card 1004 User Manual