I N S T A L L A T I O N G U I D E
CURRENT SENSING 12VOLT TRIGGER
CS12V
INTRODUCTION
A current sensing trigger enables you to activate voltage controlled devices by simply turning
another device on. For example, you can trigger an electric lift by turning your television on. The
CS12V provides this capability in a compact, easy to install package. The CS12V is compatible with
virtually any electrical device because of its ability to sense the current draw of whatever is plugged
into it.
FEATURES AND BENEFITS
The CS12V offers a number of improvements over other current sensing devices:
• Universal system — Unique current sensing circuit makes the CS12V compatible
with virtually any 110V electrical device
• Output is a constant 12V DC/200mA — Sufficient for triggering virtually any low
voltage device
• Compact footprint — Provides easy installation in unusual locations (i.e. behind a
plasma display)
• No programming — Current sensing circuitry remembers current draw of device
after installation
• Printed circuit board design — Assures high reliability and long life
• CSA US and Canada Listed
• Two year parts and labor warranty
(CONTINUED ON NEXT PAGE)
1
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
INSTALLATION CONSIDERATIONS
CS12V PRODUCT OVERVIEW
See Figure 1
1. AC Plug – Supplied 3 prong 16 gauge power cord provides power to CS12V
2. Active light – Bicolor LED indicates when CS12V is active
3. Idle Current Detect button – Sets current sensing “memory” for the component’s off
position
4. Delay – Provides three different delays for 12 volt triggering (0 seconds, 5 seconds and
10 seconds)
5. 12V DC output – 3.5mm jack provides 12V DC/ 200mA output
6. Current Sensing AC outlet – Trigger device (i.e. plasma display) is plugged into AC outlet
7. Power supply cord is used as a means for disconnection of power (install so power
supply cord is accessible).
2
Figure 1:
CS12V Product Overview
1
LR11473
AC IN
120V~60Hz 8A~
2
3
4
5
6
120V~60Hz 5A,600W~
CURRENT
SENSING
AC OUTLET
IDLE
CURRENT
ACTIVE DETECT
DELAY
OUT
1
2
3
12VDC 200mA
(CONTINUED ON NEXT PAGE)
3
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
PLACEMENT OF THE CS12V
Place the CS12V conveniently close to the component it will be connected to. Generally, the
CS12V is placed in a concealed location because its indicator lights are only used during installa-
tion. Placement possibilities include:
1. Table-top – on the floor or shelf behind the equipment Figure 2.
2. Wall-mount – affixed to the back of the equipment cabinet or a nearby wall Figure 3.
Figure 2: Table-top (on the floor or
shelf behind the equipment).
Figure 3: Wall-mount (affixed to
the back of the equipment cabinet
or a nearby wall)
(CONTINUED ON NEXT PAGE)
4
INSTALLATION
Before you begin, make sure the AC power and 12VDC power cables will both reach an unswitched
AC outlet. If necessary, terminate the wire that will be used for 12VDC triggering with a 3.5mm
mono plug, with the tip being positive and the sleeve as ground Figure 4.
IMPORTANT
Make all final connections to the
CS12V before connecting the AC
power supply.
Figure 4
1. Plug the component’s AC power cable into the current sensing outlet.
2. Plug the 12VDC trigger output cable into the 12VDC output 3.5mm jack.
3. Ensure the trigger cable is properly connected to the device being triggered.
4. Plug the female end of the supplied AC power cable into the CS12V.
5. Plug the male end of the AC power cable into an unswitched AC outlet (this equipment
must be grounded).
SEE FIGURE 5 FOR SYSTEM DIAGRAM.
O
5
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
���������������������������
������
��������
������
�����
�����������
���������
��������
��������
���������
Figure 5:
Setup of CS12V
���������
���������
Figure 6
Figure 7
6
OPERATION
SETTING THE OFF STATE OF THE CONNECTED COMPONENT
Operating the CS12V is a simple matter of setting the “OFF” state of the connected component.
Many components exhibit a small current draw even when they’re turned off. To calibrate the
CS12V to properly account for this residual current draw:
1. Make sure the component is plugged into the current sensing outlet of the CS12V and
is turned off.
2. Using a small jewelers screwdriver press the recessed “Idle Current Detect” button
until the Active light illuminates, flashes twice, and goes off (Figure 6).
The CS12V will automatically detect the current draw of the connected component in its “OFF”
state. Whenever the connected source component is turned on the CS12V will sense the current
draw of the unit and activate the 12VDC 200mA output.
SELECTING THE 12V DC TRIGGER TURN ON DELAY
In certain system designs, it may be desirable to delay the triggering of a device (i.e., waiting for
a video projector to activate before dropping the screen). The CS12V provides three delay settings
(Figure 7). The turn on delay is set by simply moving the “delay” switch to the desired position.
THESE POSITIONS ARE:
Position 1: 0 seconds,
Position 2: 5 second delay before trigger is activated
Position 3: 10 second delay before trigger is activated
(CONTINUED ON NEXT PAGE)
7
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
SPECIFICATIONS
Trigger Voltage Output:
200mA
Unit Dimensions:
6" wide x 1 3/4" high x 4 1/2" deep
Shipping Weight:
1 lb.
8
LIMITED WARRANTY
NILES AUDIO CORPORATION (“NILES”) WARRANTS ITS ACTIVE PRODUCTS (THOSE REQUIRING AC OR BATTERY POWER) TO THE ORIGINAL PURCHASER
TO BE FREE OF MANUFACTURING DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF TWO YEARS FROM DATE OF PURCHASE.
THIS WARRANTY IS SUBJECT TO THE FOLLOWING ADDITIONAL CONDITIONS AND LIMITATIONS. THE WARRANTY IS VOID AND INAPPLICABLE
IF NILES DEEMS THAT THE PRODUCT HAS BEEN USED OR HANDLED OTHER THAN IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY
THE MANUFACTURER, INCLUDING BUT NOT LIMITED TO DAMAGE CAUSED BY ACCIDENT, MISHANDLING, IMPROPER INSTALLATION, ABUSE,
NEGLIGENCE, OR NORMAL WEAR AND TEAR, OR ANY DEFECT CAUSED BY REPAIR TO THE PRODUCT BY ANYONE OTHER THAN NILES OR AN
AUTHORIZED NILES DEALER.
TO OBTAIN WARRANTY SERVICE, TAKE THE UNIT TO THE NEAREST AUTHORIZED NILES DEALER, WHO WILL TEST THE PRODUCT AND IF
NECESSARY, FORWARD IT TO NILES FOR SERVICE. IF THERE ARE NO AUTHORIZED NILES DEALERS IN YOUR AREA, YOU MUST WRITE TO NILES AND
INCLUDE YOUR NAME, MODEL AND SERIAL NUMBER OF YOUR UNIT, ALONG WITH A BRIEF DESCRIPTION OF THE PROBLEM. A FACTORY RETURN
AUTHORIZATION NUMBER WILL BE SENT TO YOU. DO NOT RETURN ANY UNIT WITHOUT FIRST RECEIVING WRITTEN AUTHORIZATION AND SHIPPING
INSTRUCTIONS FROM NILES.
IF THE ABOVE CONDITIONS ARE MET, THE PURCHASER’S SOLE REMEDY SHALL BE TO RETURN THE PRODUCT TO NILES, IN WHICH CASE NILES
WILL REPAIR OR REPLACE, AT ITS SOLE OPTION, THE DEFECTIVE PRODUCT WITHOUT CHARGE FOR PARTS OR LABOR. NILES WILL RETURN
A UNIT REPAIRED OR REPLACED UNDER WARRANTY BY SHIPPING SAME BY ITS USUAL SHIPPING METHOD FROM THE FACTORY (ONLY) AT ITS
EXPENSE WITHIN THE UNITED STATES OF AMERICA. THERE ARE NO OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION, EITHER EXPRESS OR
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PRODUCT.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER/PURCHASER. NILES SHALL NOT
BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT TO THE EXTENT PROVIDED (OR PROHIBITED) BY APPLICABLE LAW.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
FOR THE NAME OF YOUR NEAREST AUTHORIZED NILES DEALER CONTACT: NILES AUDIO CORPORATION, P.O. BOX 160818, MIAMI, FL 33116-0818.
Please fill in your product information and retain for your records.
Model__________________ Serial No.___________________ Purchase Date_________
9
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
®
BL E N D I N G HI G H FI D E L I T Y AN D AR C H I T E C T U R E
N i l e s A u d i o C o r p o r a t i o n
1 2 3 3 1 S . W . 1 3 0 S t r e e t M i a m i , F l o r i d a 3 3 1 8 6
3 0 5 - 2 3 8 - 4 3 7 3
1 - 8 0 0 - B U Y - H I F I
–
w w w . n i l e s a u d i o . c o m
©2006 Niles Audio Corporation. All rights reserved. Niles and the Niles logos and Blending
High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. All other
trademarks are the property of their respective owners. DS00430A
|