Nextar Digital Photo Frame N7 110 User Manual

N7-110  
User’s Manual  
Digital Photo Frame  
 
How to Clean LCD Screen  
Wipe the screen gently. The screen is made of glass and may be easily scratched  
or broken.  
To clean fingerprints and dust from the LCD screen, a soft, non-abrasive cloth  
such as a camera lens cleaning cloth is recommended.  
Do not apply cleaning liquid directly to the LCD screen if using LCD screen  
cleaning kits available at retail outlets. Moisten the cleaning cloth with the  
cleansing solution, then wipe the LCD screen with the damp cloth.  
Screen Saver  
Without a memory card, or when the appliance is inSTOPorPAUSEmode,  
a screen saver program will automatically start after 10 minutes. Pressing any  
buttons will return the appliance to the main screen.  
WARNING:  
Please STOP the device before you insert or remove any memory card or USB  
device. Doing otherwise may cause damage to the card/USB and the device.  
To Remove and Replace the Picture Frame Color Panel:  
Photo 1  
With both hands on the picture frame panel, place  
thumbs on the upper portion of the frame and  
index fingers at the corners. Lift the corners with  
the index finger.  
Photo 3  
To change panel, simply place  
the panel over the frame and  
Photo 2  
press down with thumbs and index  
Frame will lift off.  
fingers.  
2
 
Preparation  
1. Install the support bracket for  
the device. Plug the Digital  
Photo Frame power adaptor  
into a working electrical outlet.  
2. Turn on the main power using the switch  
on the back of the Digital Photo Frame. Then press  
thePOWERbutton on the remote control or  
on the top of the Digital Photo Frame.  
How to Insert Memory Cards  
Your Digital Photo Frame is compatible with the following memory cards:  
Secure Digital Card (SD)  
Multimedia Card (MMC)  
Memory Stick and Memory Stick Pro  
Insert the memory card with its label facing up. Do not try to force a memory card  
into the slot. If it is difficult to insert the card, you may be inserting the card  
incorrectly.  
Note: Only JPEG-format  
digital image files can be read  
by the Digital Photo Frame.  
The device may fail to read  
image files in other for  
3
 
Key Features and Remote Control  
Key Functions:  
6
5
4
3
2
1
1.MENU 2.ENTER  
3.LEFT 4.RIGHT  
5.UP  
6.DOWN  
7.DC IN  
8.SD/MMC/MS CARD  
7
8
Remote Control  
POWER: Press this button to turn the device  
on/off.  
PHOTO: Press this button to enter Slide Show  
Mode available on the main menu.  
CLOCK: Press this button to set up the time and  
the calendar.  
SETUP: Press this button to display the device’s  
setup menu.  
16:9/4:3: Press this button to choose the TFT  
LCD aspect ratios between 4:3 and 16:9.  
ZOOM: Press this button to enlarge the picture in  
increments of 2, 3, 4, 1/2, 1/3, 1/4, OFF.  
MENU: Press this button to display the main  
menu.  
Note: before you use the remote  
control, please remove all plastic  
strips.  
4
 
SLIDE SHOW: Press this button to  
view the pictures one by one  
automatically.  
: Press this button once to freeze the playback  
picture.  
: Press this button once to halt playback  
(pre-stop). Press the button again to terminate  
playback function and return to the main menu.  
: Press “ to return to the previous  
title/chapter/track/picture.  
ROTATE: Press this button to adjust  
the viewing angle of the pictures.  
: Press “  
” buttons to  
select the menu you want.  
ENTER: Press “ENTER” for the  
settings menu.  
: Press “ to skip ahead to the next  
title/chapter/track/picture.  
How to Install and Replace Remote Control Battery  
1. Hold the remote control with the buttons facing downward.  
2. Hold the remote control cover with one hand and use the other hand to pull the  
battery tray out of the remote control cover.  
3. Put a “CR2025” lithium battery into the battery tray with the positive “+” side  
facing up.  
4. Push the battery tray back in.  
Main Menu  
The screen will display as follows if the memory card has been correctly inserted.  
Make sure you have stored a song, photo, or video file on your memory card.  
PHOTO  
Enter the Photo display  
mode directly  
SETUP  
CLOCK  
Enter the setup mode directly  
Enter the clock mode directly  
SETUP:  
Main menu:  
z SYSTEM SETUP  
z PHOTO SETUP  
z CLOCK SETUP  
Parameter settings  
Picture settings  
Clock settings  
5
 
SYSTEM SETUP  
Press the Right and Left arrow keys to navigate through the Setup Categories. Press  
the Up and Down arrow keys to navigate through setup function items. Press the  
Right and Left arrow keys to modify settings, and then press ENTER to confirm the  
settings.  
Operation:  
OSD LANGUAGE: OSD language  
settings.  
DEFAULT: Restores your Digital Photo  
Frame back to the factory default settings.  
S/W VERSION: Shows the current version of the software.  
PHOTO SETUP:  
EFFECT: Allows you to activate or deactivate the photo display effects. Press the  
Right or Left arrow keys and the ENTER button to turn OFF or ON (16 effects in  
total).  
FREQUENCY: Allows you to set the interval frequency with which the display will  
change the photos. Press the Right or Left arrow keys and the ENTER button to set  
the frame to DEFAULT and the interval: 10SECOND, 30SECOND, 1MINUTE,  
30MINUTE, 1HOUR  
JPEG INFOAllows you to adjust  
the JPEG photo ON/OFF settings.  
Press the Right or Left arrow keys  
and the ENTER button to turn  
ON or OFF.  
PLAY MODEAllows you to adjust the order the photos will be displayed in. Press the  
Right or Left arrow keys and the ENTER button to switch the mode between  
NORMAL or RANDOM mode.  
6
 
CLOCK SETUP  
Function:  
DATE SETUP: Press arrow keys  
and ENTER button to set the date.  
TIME SETUPPress arrow keys  
and ENTER button to set the  
time.  
POWER ONPress arrow keys and ENTER to set the time to power on the device.  
POWER OFFPress arrow keys and ENTER to set the time to power off the device.  
How to Set the Clock  
Set the local time and calendar  
Press the Up and Down arrow keys to  
select functions.  
Press the Right and Left arrow keys to  
select desired settings.  
Press the ENTER key to confirm settings.  
Specifications  
Display: 7” TFT LCD 480 X 234 (RGB)  
Power: AC Adapter; Input 100-240V; Output 12V 1-1.5A  
Environmental Requirements  
Operation: 0~35, Humidity 0~85%  
Storage: -20~60, Humidity 10~90%  
Accessories:  
AV Adapter  
Remote Control  
Warranty Card  
Registration Card  
Return Card  
Manual  
7
 

Miele Washer W 2839i WPM User Manual
Musical Fidelity CD Player M3CD User Manual
NAD Stereo System 216THX User Manual
Niles Audio Car Amplifier SI 275 User Manual
Nilfisk ALTO Clothes Dryer 743 L User Manual
Oki Printer 410d User Manual
Olympus Camcorder 227670 User Manual
Omega Engineering Thermometer HH505 User Manual
Oregon Scientific Radar Detector BAR608HGA User Manual
Oster Bread Maker deluxe bread and dough maker User Manual