LCD Travel Alarm Clock
And Digital Photo Display
Please read carefully before using this equipment.
Thank you for purchasing this portable digital photo display. It can be used to store 60 photos. It
is quick and easy to download pictures into your photo display. You may view your favorite
pictures stored in this photo display anytime, anywhere.
Overview of your Digital Photo Display
- 1 -
LCD Display
- 2 -
Feature
1. Photo display: JPG,BMP
2. Manual or Auto play mode
3. Time & Date Display
4. Clock & Hourly Call
5. Temperature Display
6. Background light
Accessory
1. Photo Viewer *1
2. 5Pin Mini USB Cable *1
3. Driver CD *1
4. User Manual *1
5. AAA Battery *2
6. 3V (CR2032) battery *1
7. Protective Pouch *1
Key Function
Previous
Next
Increase
- 3 -
Decrease/Background light
Power ON/OFF
Time Setup
Temp Setup
Operation:
1. Install 2 AAA batteries into the unit. The unit will then start automatically and switch to
slide-show mode. Then you can press
Press
or
to select your favorite picture.
, to go to the main menu, shown below:
1) To turn off, press
or
to POWER OFF and press
to confirm.Press and hold
for 3 seconds to turn on the until.
Remark: To prevent the waste of battery power, the unit is off automatically at 120 seconds by
default. If you need to change off time, please go to “Auto On/Off” menu.
2) To delete a photo, press
or
to Delete Image and press
to confirm.
3) To select Automatic or Manual slideshow, press
to confirm:
or
to Display Mode and press
- 4 -
· Press
or
to Auto Slide and press
to set up the slideshow interval (the default
interval time is 10 seconds, but you can select from 0~120 seconds):
·Press
manual slide mode. Then you can press
4) To set the clock, press or
or
to Manual Slide and press
to confirm. The device will switch into
to view the pictures.
or
to Clock Set and press
to confirm.
Press
or
to set up the date and time. Press
to confirm at each step.
- 5 -
5) Press
or
to select Clock Disp, then press
to confirm. The device will enter
into clock setup shown below:
·Press
or
to select Disp Clock Normal, then press
to confirm:
6) Press
or
to Auto ON/OFF, then press
, it enters into the Auto ON/OFF setup as
shown below:
- 6 -
·Press
below:
or
or
to select Auto ON, and the device will enter into the time setup shown
·Press
function.
to select Auto OFF, then press
. The device will deactivate the auto off
to confirm. The device will exit the setup
7) Press
or
to select Exit, then press
mode. (Note: if you stop pressing buttons for more than 60 seconds while in the setup mode,
the photo viewer will switch into photo viewing mode automatically.)
2. When in photo display mode, press
to enter into delete mode, shown below:
·Press
or
to select Del Current, then press
again to delete the current photo.
Select Del All to delete all photos, and select Exit to quit delete mode
- 7 -
3. Set the Clock
Set the Time:
1. Press and hold
2. Press
for 3 seconds until the hour digits flash.
to set the hour.
3. Press
4. Press
5. Press
6. Press
7. press
8. Press
9. Press
10. Press
11. Press
to confirm. The minute digits flash.
to set the minute.
to confirm. The year digits flash.
to set the year.
to fonfirm,The month digits flash.
to set the month.
to confirm. The date digits flash.
to set the date.
to confirm.
Note: You can Press
to view the date and month at standby mode.
4．Set the Alarm
1. Press
.
2. Press and hold
3. Press
for 3 seconds until the alarm icon
to set the minute.
appears, and the minute digits flash.
4. Press
5. Press
6. Press
to confirm. The hour digits flash.
to set the hour.
to confirm.
5．Background light
1. Press
to show Background light
2. Background light off within 5 seconds.automatically
- 8 -
6．Select the Temperature Format
1. Press
2. Press
to display the temperature in°C or °F.
to confirm.
Specifications
Picture Formats
Picture resolution
LCD
BMP,JPG,PNG,GIF,TIF
128*128 dots
1.5”TFT
Memory Device
Memory Capacity
Slide Mode
Built-in 8Mbit flash
60 photo
Yes
Automatic Energy Saving
Transmission Interface
Power Supply
120s
USB Interface Ver.1.1
2*AAA(3V)Batteries
USB 5V(optional)
0℃-40℃
Working Temperature
Operation System
Win 98 SE/ME/2000/XP/Vista
Clock and Thermometer
Time Format
12/24
Temperature
-5℃-50℃
±2℃
Temperature Accuracy
- 9 -
Test Period (Temperature)
Back Light
10 seconds
5 seconds
Power Supply
3V(CR2032)
Replace Battery for Thermometer
Your clock and thermometer comes with one CR2032 battery. If it does not work, please take the
following steps to replace the battery.
1. Open the battery cover with a coin.
2. Remove old battery and install the new battery correctly into the compartment.
3. Replace the battery cover.
4. Software installation
Please copy the software to your PC. (Note: this software does not need to install.)
- 10 -
5. Picture Download
After you copy the software to your PC， connect the photo viewer to your PC, and the following
dialogue appears:
Press
or
to select USB Charge and press
to confirm, or don’t press any buttons
for 60 seconds. The device will enter into USB charge mode. During this time, you cannot
download photos into the photo viewer, but you can operate the unit.
Press
or
to select USB update and press
to confirm. The computer will search
the hardware automatically, then run the software “PhotoViewer.exe”. (Note: If you have
selected USB charge, then please disconnect the USB cable and reconnect it.) The following
dialogue will appear:
- 11 -
Select photos from your PC and click
to add the selected photo into the right panel:
- 12 -
- 13 -
You can edit the selected photo by clicking
photo.
or
to rotate, and
or
to crop the
Click
to delete the selected photos from the right panel. Then press
to download the
selected photos into your photo viewer:
- 14 -
- 15 -
When the download is finished the following message will appear: “Photo Viewer data
synchronize complete”. Click OK to finish.
(Please connect the PC when you download pictures. If you have open windows, close them
before connecting your PC.)
- 16 -
|