New Holland Lawn Mower TD5050 User Manual

New Holland  
TD Tractor Specifications  
TD80D TD5050 TD5050 High-Clearance  
MODEL  
TD80D  
TD5050  
ENGINE  
Type  
4-cycle, diesel, naturally aspirated  
4-cycle, diesel, turbo-charged  
Number of cylinders  
Displacement, cu. in. (L)  
Gross engine horsepower, hp (kW)  
PTO horsepower, hp (kW)  
4
4
238 (3.9)  
72 (53)  
62 (46.2)  
274 (4.5)  
93 (69.4)  
80 (59.7)  
Rated speed, RPM....................................................................................................................................2500..........................................................................................................  
Maximum torque  
Torque rise  
206 ft.-lbs. @ 1500 RPM  
28%  
288 ft.-lbs. @ 1300 RPM  
44%  
Fuel type...........................................................................................B20 Biodiesel (meeting ASTM 6751 standards) and/or standard diesel fuels .................................................  
Air filter..................................................................................Dual element, dry type with cleanable outer element and replaceable inner safety element ......................................  
Lubrication..........................................................................................Full flow, pressure lubrication with vertical mount spin-on filter cartridge....................................................  
Oil & filter change interval....................................................................................................................300 hours......................................................................................................  
Starting aid..........................................................................................................................................Thermostart ...................................................................................................  
Throttle....................................................................................................................................Hand and/or foot controlled........................................................................................  
Exhaust .....................................................................................Under hood muffler w/ vertical exhaust pipe, optional under-slung horizontal exhaust..........................................  
Emissionization standard  
Tier-II  
Tier-III  
Fuel tank capacity, gal. (L)...................................................................................................................23.8 (90.1).....................................................................................................  
TRANSMISSION  
Base on standard tractor........................12Fx12R with synchronized mechanical shuttle (4 synchronized speeds in 3 constant mesh ranges, dedicated left hand shuttle)........  
Optional transmission.......................................................................................20Fx12R creeper with synchronized mechanical shuttle..................................................................  
(4 synchronized speeds in 3 non-synchronized ranges, creeper operates in lower 2 ranges)  
Traction clutch, in. (mm)  
Dry 11 (279.4) diameter heavy duty  
Dry 12 (304.8) diameter heavy duty organic plate cerametallic plate  
Ground speed*, mph (kph) .............................................Base transmission: Forward - 1.05 to 17.3 (1.69 to 27.8), Reverse - 1.02 to 16.9 (1.64 to 27.2).................................  
.....................................................................................Optional creeper transmission: Additional 8 forward speeds between 0.2 - 1.9 (.322 - 3.06).....................................  
Rear axle, in. (cm)...........................................................................................................59 - 79 (150 - 201) track adjustment ................................................................................  
Rear differential lock.........................................................................................................Mechanical foot pedal engagement..................................................................................  
Service brakes..............................................................................................Hydraulically assisted wet disc, self-adjusting and equalizing .............................................................  
Parking brake............................................................................................................Hand-lever engagement, locks service brakes..........................................................................  
HYDRAULICS  
System type ...............................................................................................................Open center, fixed displacement gear pump...........................................................................  
System pressure, psi (bar)..................................................................................................................2,755 (190) ....................................................................................................  
Implement pump capacity, gpm (l/m)  
Steering & services system, gpm (l/m)  
13.6 (51.5)  
Hydrostatic power steering  
w/dedicated gear pump - 8.1 (30.1)  
21.7 (82.1)  
17.2 (65.1)  
9.2 (34.8)  
Total maximum tractor flow, gpm (l/m)  
26.4 (99.9)  
Remote valves - standard.......................................................1 open center, rear mounted, color coded lever controls with quick coupler dust covers........................................  
Remote valves - optional ...................................................Up to 3 open center, rear mounted, color coded lever controls with quick coupler dust covers...................................  
2 valve open center loader control valve, joystick controlled (needed for loader operations)  
3-POINT HITCH  
Rear .......................................................................................................................................................Standard.......................................................................................................  
Category.......................................................................................................................................................II.............................................................................................................  
Position control / draft sensing ......................Two levers w/ ability to blend draft and position control / mechanical, lower link sensing w/ hydraulic position control................  
Lower link ends.......................................................................................................................................Flexible........................................................................................................  
Stabilizers .............................................................................................................................................Telescopic......................................................................................................  
ASAE lift capacity @ 24 in., lbs. (kg) .................................................................................................5,025 (2280) ...................................................................................................  
Fast raise / lower control......................................................................Standard equipment, mechanical push button with finger-tip operation .....................................................  
Upper limit regulation......................................................................Standard equipment, adjustable mechanical stop limit on hitch upper lift arm ................................................  
Page 1of 3  
 
New Holland  
TD Tractor Specifications  
TD80D TD5050 TD5050 High-Clearance  
MODEL  
TD5050 High-Clearance  
MODEL  
TD5050 High-Clearance  
ENGINE†  
3-POINT HITCH  
REAR  
Type  
4-cycle, diesel, turbocharged intercooled  
Standard  
Number of cylinders  
Displacement, cu. in. (L)  
4
Category  
Position control / draft sensing  
II  
274 (4.5)  
Two levers w/ ability to blend draft and position  
control / mechanical, lower link sensing w/  
hydraulic position control  
Flexible  
Gross engine horsepower, hp (kW) 90 (67)  
PTO horsepower, hp (kW)  
Rated speed, RPM  
Maximum torque  
Torque rise, %  
80 (59.7)  
2500  
Lower link ends  
Stabilizers  
346 ft.-lbs. @ 1500 RPM  
Telescopic  
44  
ASAE lift capacity @ 24 in., lbs. (kg) 5,025 (2279)  
Fuel type  
100% Biodiesel approved (meeting ASTM  
6751 standards, see your New Holland dealer  
for guidelines) and/or standard diesel fuels  
Dual element, dry type with cleanable outer  
element and replaceable inner safety element  
Full flow, pressure lubrication with  
vertical mount spin-on filter cartridge  
Fast raise / lower control  
Standard Lift-O-Matic, mechanical push button  
with finger-tip operation  
Upper limit regulation  
Standard equipment, adjustable mechanical  
stop limit on hitch upper lift arm  
Air filter  
Lubrication  
PTO  
REAR  
Standard, w/ flip-up PTO shaft guard  
Independent, dry, organic plate  
12 (305)  
Single lever, mechanical engagement  
540 RPM (540/1000 optional)  
Oil & filter change interval, hours 300  
Clutch type  
Clutch diameter, in. (mm)  
Engagement  
Speed  
Starting aid  
Throttle  
Exhaust  
Thermostart  
Hand and/or foot controlled  
Under hood muffler w/ vertical exhaust pipe,  
optional under-slung horizontal exhaust  
US EPA Tier III  
Emissionization standard  
Fuel tank capacity, gallons (L)  
ELECTRICAL  
Alternator  
31 (118)  
12 volt, 120 amp  
Battery capacity  
(cold cranking amps)  
Lighting  
TRANSMISSION  
800  
Standard transmission  
20Fx12R creeper with synchronized mechanical  
shuttle (4 synchronized gears and 3 ranges,  
creeper operates in lower 2 ranges)  
Dry 12 inch diameter heavy duty cerametallic plate  
Forward: 0.15-17.5  
2 hi/lo beam headlights, 1 rear worklight, brake  
lights, flashing safety lights/turn signals  
Standard equipment, 7-pin implement outlet,  
4-pin (25 Amp) outlet, 1-pin (8 Amp) outlet  
Automotive blade type  
Accessory power outlets  
Fuses  
Traction clutch  
Ground speed*, mph  
Reverse: 1.01-16.8  
Two creeper ranges provide minimum  
groundspeed of 13.1 ft./min. (400 cm/min.)  
at 2,500 egine RPM  
APPROXIMATE SHIPPING WEIGHT  
ROPS - 2WD / FWD, lbs. (kg)  
7,888 / 8,818 (3578 / 4000)  
115.7 (2940)*  
Rear differential lock  
Service brakes  
Mechanical foot pedal engagement  
Individual hydraulic wet disc, self-adjusting  
and equalizing  
APPROXIMATE DIMENSIONS  
Height to top of ROPS, in. (mm)  
Parking brake  
Hand-lever engagement, locks service brakes  
WHEELBASE  
2WD, in. (mm)  
FWD, in. (mm)  
2WD, in. (mm)  
FWD, in. (mm)  
89.7 (2278) – narrow axle  
87.5 (2222) – narrow axle  
85.3 (2168) – wide axle  
83.1 (2112) – wide axle  
HYDRAULICS  
System type  
Open center, fixed displacement gear pump  
2,755  
System pressure, psi  
Implement pump capacity,  
gpm (L/min)  
16.1 (61)  
TRACK WIDTH  
Minimum  
Maximum  
Steering & services system  
Hydrostatic power steering w/dedicated gear  
pump - 7 gpm (26.5 L/min)  
Rear without spacers, in. (mm)  
Rear with spacers, in. (mm)  
Front 2WD, in. (mm)  
59.2 (1504)  
72.2 (1834)  
61.6 (1566)  
61.7 (1569)  
79.6 (2021)  
83.8 (2130)  
77.4 (1966)  
81.9 (2082)  
Total maximum tractor flow,  
gpm (L/min)  
Remote valves - standard  
23.1 (87.5)  
Front 4WD, in. (mm)  
Manufacturer's estimate  
*measured with 320/80R42 tires  
1 open center, rear mounted, color coded lever  
controls with quick coupler dust covers  
Up to 3 open center, rear mounted, color coded  
lever controls with quick coupler dust covers  
Remote valves - optional  
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).  
Design, materials and/or specifications are subject to  
change without notice and without liability therefor.  
Specifications are applicable to units sold in Canada, the  
United States, its territories and possessions, and may  
vary outside these areas.  
Safety begins with a thorough understanding of  
the equipment. Always make sure you and  
your operators read the Operator’s Manual  
before using the equipment. Pay close  
attention to all safety and operating  
decals and never operate machinery  
without all shields, protective devices  
and structures in place.  
© 2009 CNH America LLC  
New Holland is a registered trademark of CNH America LLC.  
Page 3of 3  
 

Miele Washer W 939 WPS User Manual
Napoleon Fireplaces Stove EPA 1100 User Manual
Nikon Camera Lens AF S VR NIKKOR User Manual
Nikon Digital Camera SB2F01 11 User Manual
NuTone Dollhouse QTREN080FL User Manual
OEM Systems Speaker System PV 6LCRS User Manual
Oregon Scientific Digital Camera DS9320 15 User Manual
Panasonic Cell Phone KX TGA270S User Manual
Panasonic Network Card MALT062HG User Manual
Parasound Stereo Amplifier Zpre Zone User Manual