Network Technologies Network Card Adapter User Manual

NETWORK  
TECHNOLOGIES  
INCORPORATED  
Tel:330-562-7070  
Fax:330-562-1999  
1275 Danner Dr  
Aurora, OH 44202  
17,  
USB-ADB USB TO ADB ADAPTER  
INSTALLATION / USER GUIDE  
MAN009 REV 4/20/01  
 
Setup  
When using the USB-ADB adapter to connect to an NTI KVM switch:  
1. Connect the male 8 pin minDIN end of the MKTINT-xx-MM cable to a female 8 pin minDIN Keyboard and Mouse input port on the  
NTI KVM switch being used (see Fig. 3). Switch the power ON to the KVM switch if it isn't already.  
2. Connect the male 4 pin miniDIN end of the MKTINT-xx-MM cable to either of the 4 pin miniDIN female ports on the USB-ADB  
adapter (see Fig. 4).  
Mating Face of a 8 Pin miniDIN Female  
Fig. 3  
Mating Face of a 4 pin miniDIN Female  
Fig. 4  
3. Connect the USB type B male connector of the USB-AB-0.5M-5T cable (see Fig. 6) to the USB type B female port on the USB-  
ADB adapter.  
4. Connect the USB type A male connector of the USB-AB-0.5M-5T cable (see Fig. 7) to a USB type A female port on the host  
computer. Note: It is important to make this connection last, particularly if the host computer is already ON at the time of  
connection.  
USB Type A Male  
USB Type B Male  
Connector  
Connector  
Fig. 7  
Fig. 6  
When using the USB-ADB adapter to connect an ADB MAC Keyboard and/or Mouse to a MAC with a USB port:  
1. Connect the 4 pin minDIN male connector of the MAC keyboard and mouse assembly into either of the female 4 pin miniDIN ports  
on the USB-ADB adapter.  
2. Continue with steps 3 and 4 above.  
PLEASE NOTE: We recommend that the host computer be configured such that the Sleep Mode is not enabled. However,  
if it is necessary to enable the sleep mode, in order to wake up from Sleep Mode, the user must momentarily disconnect the  
USB cable connection from either the USB-ADB adapter or from the host computer. Simply unplug the connection, then  
plug it back in.  
Download from Www.Somanuals.com. All 2Manuals Search And Download.  
Technical Specifications  
Mating Face of a 4 pin miniDIN Female  
Mating face of a USB Type B Female  
2
3
1
4
4
3
1
2
PIN # SIGNAL  
PIN #  
SIGNAL  
DATA  
PWRN  
+5  
1
2
3
4
+VCC  
- DATA  
+DATA  
GND  
1
2
3
4
GND  
Fig. 8  
Fig. 9  
WARRANTY INFORMATION  
The warranty period on this product (parts and labor) is one (1) year from the date of manufacture (indicated on the bottom of the  
product). Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at  
http://www.nti1.com for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.  
COPYRIGHT  
Copyright © 2001 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a  
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without  
the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202  
CHANGES  
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right  
to make changes in the product design without reservation and without notification to its users.  
SERIAL NO.:  
INSPECTED BY:  
DATE:  
Download from Www.Somanuals.com. All 3Manuals Search And Download.  

Miele Oven H4880BP User Manual
MTD Lawn Mower 105 thru 108 Series 130 thru 148 Series 730 thru 738 Series User Manual
Murphy Network Card RMU16 User Manual
NeumannBerlin Microphone KK 104 S User Manual
Nortel Networks Switch Contivity1510D User Manual
NuTone Iron AVD50N User Manual
Oce North America Photo Printer 500XL User Manual
Onkyo Stereo Receiver TX SR875 User Manual
Oregon Scientific Fitness Electronics PM138 User Manual
Panasonic Electric Shaver ER327 User Manual