Nady Systems Portable Speaker PCS 15 User Manual

Features, Instructions  
& Technical Data  
P-Cab™ Powered Speakers  
PCS-15  
Two-Way Powered Speakers  
Congratulations!  
You have just purchased one of the finest powered speakers on the market today.  
The P-Cab Series™ was developed using the expertise of professional sound  
engineers and working musicians. You will find your new NADY AUDIO powered  
speaker has superior performance and greater flexibility than any other powered  
speaker in its price range.  
We recommend that you read this instruction sheet carefully to get the most out of  
your new unit. Thanks for selecting NADY AUDIO and the PCS-15 as your choice in  
powered speakers.  
Powerful 2-way active speakers with superior performance, state-of-the-art  
veratile design, unprecedented affordability, and perfect for all small venue  
application.  
AND SPECIFICATIONS  
F E A T U R E S  
• Full-range, 2-way 250W RMS powered speaker (bi-amped) with 15” woofer,  
• Fused IEC power cord jack and 115V(60Hz) / 230V(50Hz) Select switch.  
titanium horn  
• Full top-end speaker features, including low impedance electronically  
compensated crossover (1/36 octave, 1500Hz) with full driver protection  
(pre-circuit limiter), wide-angle, short throw, high-frequency dispersion horn  
(90°H x 60°V) with 1.5" diameter precision constant directivity titanium  
compression driver, 40Hz to 20KHz frequency response (-10dB), high SPL  
output capability (125dB @1M), and ultra low distortion (<0.02%)  
• Durable yet lightweight molded high-impact, mineral-loaded polypropylene  
trapezoid speaker enclosures,designed to deflect bumps and scrapes and  
perfectly balanced for ease of portability and set-up; built-in handles for  
carrying  
• Ultimate flexible design-flyable, stackable, pole mountable, or can be used  
as a floor monitor when laid on its side with supplied brace mounts  
• Response: 40-20KHz  
• Internal power system delivers 200W RMS to the woofer, 50W RMS to the  
horn and provides high quality audio performance more efficiently than  
conventional power amplifiers with passive speakers  
• 8impedance  
• Sensitivity (1W/1M): 91dB  
• Weight: 52.2 lbs (23.68 Kg)  
• Easy to use built-in pre-amplifier with XLR and 1/4” balanced Mic/Line  
inputs; gain, treble, mid range, bass and level controls; and Signal  
indicators  
• Dimensions (WDH): 17.3” x 26.6” x 13.6” (43.9 cm x 67.6 cm x 34.5 cm)  
• Optional padded zippered vinyl carrying case available  
IMPORTANT SAFETY INSTRUCTIONS  
W A R N I N G S  
When using this speaker, basic precautions should always be taken, including the following:  
• Read all instructions before using the product.  
• Don’t place any heavy appliance or object (>130lbs/60kg) on the speaker  
enclosure.  
• This product may be capable of producing sound levels that could cause  
permanent hearing loss. Do not operate for a long period of time at a high  
volume level or at a level that is uncomfortable. If you experience any  
hearing loss or ringing in the ears, you should consult an audiologist.  
To avoid damage to the drivers, never overload the speaker.  
To avoid the risk of fire, do not ever expose the speaker to a source of  
naked flames. Also, it should be located away from heat sources such as  
radiators, heat vents, or other devices (including amplifiers) that produce  
heat.  
• The product should be positioned so that proper ventilation is maintained.  
• This speaker is designed for indoor use only. Do not expose to weather or  
high humidity, rain, etc.  
• Care should be taken so that objects do not fall into, and liquids are not  
spilled through, the enclosure’s openings. Do not place containers of liquids  
on the speaker.  
• This unit is to be installed by qualified personnel only.  
• This speaker is only to be used with power amplifiers complying with the  
safety requirement of EN or IEC60065.  
• This product should be serviced by qualified service personnel if:  
A. Objects have fallen into, or liquid has been spilled onto the product.  
B. The product has been exposed to rain.  
C. The product does not appear to operate normally or exhibits  
a marked change in performance.  
D. The product has been dropped, or the enclosure damaged.  
• Do not attempt to service this unit. All servicing should be referred to  
qualified service personnel.  
 

Miele Clothes Dryer T 220 User Manual
Milan Technology Switch CERTXFX01 User Manual
NEC Projector VT800 User Manual
NETGEAR MP3 Player EVA700 User Manual
Oki Printer 5500n User Manual
Oregon MP3 Player MP 130 User Manual
Oregon Scientific Fitness Electronics PE326CA User Manual
Panasonic Computer Monitor CF VDL02BM User Manual
Panasonic Electric Shaver ES7016 User Manual
ParaBody Home Gym PBF405C User Manual