NETGEAR Network Router JWNR2010v3 User Manual

Step 2:  
Step 3:  
Step 1:  
Connect one end of the blue  
Ethernet cable to your modem,  
and the other end to the Internet port  
on your router.  
Plug in, then turn on your modem.  
Unplug the power  
to turn off your modem.  
Installation Guide  
Wait approximately two minutes  
until your modem turns on.  
N300 Wireless Router  
JWNR2010v3  
If your modem has a battery backup,  
first remove and reinsert the battery  
before connecting your  
modem to power.  
Internet  
Package Contents  
DSL  
or Cable  
Modem  
N300 Wireless Router  
(not included)  
N300 Wireless Router  
Step 5:  
Step 4:  
Step 6:  
Connect the router  
to your computer.  
Open a browser.  
Connect the power adapter to the  
router, plug the power adapter into  
and outlet, and press the  
Use another Ethernet cable to establish  
a wired connection as shown in this diagram.  
If the web page does not display,  
close and reopen the browser  
in the address bar. The user name  
and password are on the  
Power On/Off button on the router.  
Wait until the Wireless LED  
solid green.  
Power adapter  
Ethernet cable  
turns  
Optionally, connect wirelessly by using the  
preset wireless security settings  
located on the product label on the router.  
product label on the router.  
 

Miller Electric Welder S 75S User Manual
Miller Electric Welding System Blue Star 3500 User Manual
Milwaukee Drill 0141 1 User Manual
Nilfisk Advance America Vacuum Cleaner IVB 3 H User Manual
Oneida Air Systems Dust Collector Super Dust Gorilla User Manual
Onkyo Speaker System ED 901 User Manual
Panasonic Cordless Telephone KX TG6721E User Manual
Panasonic Laptop CF55 User Manual
Panasonic Security Camera WV NS324 User Manual
Panasonic Smoke Alarm 4313 User Manual