NETGEAR Network Card WNDA3100V2 User Manual

5. You will be prompted to connect to a wireless network:  
5. In the Setup Type screen, leave the  
Express (Recommended) radio button  
selected. Express automatically detects  
and configures your program features,  
allowing for a faster setup.  
If you have a wireless router or access point that supports Push 'N' Connect  
(NETGEAR's Wi-Fi Protected Setup), then you will be prompted by the first  
screen. Leave the Yes... radio button selected and click Next to continue. Follow  
the Smart Wizard steps to connect using WPS (Wi-Fi Protected Setup).  
)NSTALLATION 'UIDE  
NETGEAR RangeMax™ Dual Band Wireless-N USB Adapter WNDA3100v2  
6. Click Next.  
Note: You can choose to bypass Push 'N' Connect by selecting No, I do not want  
to use Push 'N' Connect and click Next.  
Package Contents  
For Windows XP, if a Windows logo  
testing message appears, click  
Continue Anyway.  
If no WPS-capable devices are detected, you will be prompted by the second  
screen. Select your wireless network name from the list of wireless networks and  
click Next to continue. If you select a secured network, the Smart Wizard will  
detect it and you will be prompted to enter your passphrase.  
Wireless USB Adapter  
USB cable and cradle  
If a message that Windows Vista  
Resource CD (includes warranty and customer support information)  
Installation Guide (this guide)  
cannot verify the publisher of this driver displays, click Install this driver  
software anyway. You will be prompted to insert your wireless USB adapter.  
Then, Insert the Wireless USB Adapter and  
Connect to a Wireless Network  
Express will install the WNDA3100v2 software and your program features will be  
configured automatically. You will be prompted to connect your adapter.  
Start Here  
This Installation Guide will show you how to install the WNDA3100v2 adapter on your  
PC and connect your PC to a wireless network. Two connection methods are available:  
The Express method, presented here, uses the NETGEAR Smart Wizard to install  
and configure the adapter automatically and allow you to connect to your wireless  
network with Push 'N' Connect Security.  
1. Locate an available USB port on your PC.  
2. Insert the wireless adapter into the USB  
port. You can attach the wireless USB  
adapter directly or use the USB cable (see  
“Affixing the USB Adapter Cradle” on the  
other side of this guide).  
The Custom method lets you choose your WNDA3100v2 installation options or  
select the Windows Utility to install and manage your wireless network. For details  
on Custom installation, see the User Manualon the Resource CD.  
WPS-capable networks in your area  
No WPS-capable networks in your area  
The adapter will initiate your connection. It can take up to a minute or two to  
complete the connection. You are now connected to a wireless network!  
These setup instructions assume that you will connect to an access point or wireless router.  
Estimated completion time: 10 minutes.  
3. Depending on which Windows operating  
system you are using, do one of the  
following:  
6. On the Connecting to your wireless network screen, fill in the <Enter a Profile  
Name Here> field; the default name is Profile. After you have reviewed the settings,  
click Finish.  
First, Install the WNDA3100v2 Software  
1. Insert the Resource CD. If the CD main page does not display, browse the files on the  
Windows Vista. The adapter and  
driver are automatically added. If a message that Windows Vista cannot verify  
the publisher of this driver displays, click Install this driver software anyway.  
The WNDA3100v2 icon  
appears in the system tray and on the desktop so you can  
access the Smart Wizard screen if you want to make any changes or connect to a different  
wireless network.  
CD and double-click Autorun.exe.  
Windows XP. Follow the onscreen instructions for the Found New Hardware  
Wizard.  
2. Click Install the Software. The Software Update Check screen displays.  
3. If you are connected to the Internet, click Check for Updates. If not, click Install  
If a Windows logo testing message appears, click Continue Anyway.  
from CD.  
When the Found New Hardware Wizard is complete, click Finish.  
4. The NETGEAR Smart Wizard Welcome screen displays. Click Next. Select I Agree  
and then click Next to accept the licensing agreement.  
4. On the NETGEAR Smart Wizard screen, click Next to proceed.  
 

Miele Microwave Oven M 613 G User Manual
MTX Audio Speaker MP52B User Manual
NorthStar Navigation GPS Receiver NAIS 300 User Manual
Numark Industries CD Player CDN25 User Manual
Omega Vehicle Security Thermometer HH2100 Series User Manual
Onkyo Video Game Sound System LS B40 User Manual
Optimus Stereo Receiver STAV 3790 User Manual
Oregon Scientific Weather Radio BAR986HGA User Manual
Panasonic Projector Accessories ET PKD75 User Manual
Panasonic Telephone KXTG9381T User Manual