NETGEAR Network Card WN511B User Manual

3. Use the Smart Wizard to set up your wireless adapter.  
4. Use the status bar to verify your wireless connectivity.  
)NSTALLATION 'UIDE  
a. Choose to set up your wireless adapter  
either with the NETGEAR Smart Wizard  
(recommended) or the Windows  
configuration utility.  
The status bar is located at the bottom of the Settings page.  
NETGEAR RangeMax™ NEXT Wireless Notebook Adapter WN511B  
These setup instructions assume that you will connect to an access point or wireless router.  
Estimated completion time: 10 minutes.  
connection  
status  
signal strength  
indicator  
Note: If you choose the Windows Zero  
Configuration option, then you must read  
the Windows XP documentation for  
instructions.  
Internet/router  
connection indicator  
unlocked: network  
does not use security  
Windows XP Installation  
The connection status indicator  
status of the connection.  
and the WN511B icon  
show the  
1. First, install the WN511B  
software.  
b. Click Next to accept the NETGEAR  
Smart Wizard. You will be prompted to  
let the wizard help you connect to a  
network (recommended).  
For details about the icons in the status bar, the WN511B LEDs, and  
troubleshooting tips, see the User Manual on the NETGEAR CD. Note that you  
may see two channels listed, indicating that your wireless adapter is operating in  
the enhanced multi-channel mode.  
Insert the NETGEAR CD. If the  
CD main page does not appear,  
double click Autorun.exe on  
the CD.  
c. Click Next to accept.  
The Internet/Router connection indicator shows the progress of your connection.  
a. Click Install Software.The  
Check for Updates window  
will open.  
d. Select the wireless network from the  
drop-down list, and the wizard records  
your choice.  
b. If you are connected to the  
Internet, click Check for  
Connection Indicator  
Description  
Note: Hidden networks do not broadcast  
the Network Name (SSID). These  
networks are included in the drop-down  
list, but the Network Name (SSID) is  
blank.  
Connected to Internet  
Connected to Router  
Wireless Internet connection OK.  
Updates. If not, you can  
choose to install from the CD.  
Wireless connection to router OK  
but no Internet connection at router.  
c. When the Installation Complete message appears, click Next.  
___.___.___.___ or  
169.254..x.x  
Wireless connection to a router OK  
but problem with the router. See the  
online help or User Manual for  
troubleshooting tips.  
d. On the SmartWizard screen, click Next to proceed with the SmartWizard setup.  
e. The Smart Wizard will detect if the  
2. Now, insert the wireless adapter.  
network uses security or not. Follow the Wizard steps for Security (if used) and  
for saving a Profile.  
a. When prompted, insert your wireless adapter.  
b. Click Next to proceed. Windows will discover the  
f. After you have reviewed the settings, click Finish.  
adapter and continue the software installation process.  
The WN511B icon  
appears in the system tray and on the desktop, and the  
c. Follow the Windows prompts to complete the  
software installation.  
Settings page opens. The wizard initiates your wireless connection. It could take  
up to a minute for your wireless connection to be established.  
If a Windows logo certification warning appears, click Continue to proceed with  
the installation.  
d. When the Windows software installation is complete, click Finish.  
 

Moyer Diebel Dishwasher MH 60M5 User Manual
Murphy Automobile Parts VM 12 User Manual
Nikon Digital Camera SB 24 User Manual
Omega Engineering Thermometer FSW 50 User Manual
Oregon Scientific Clock PS S01 User Manual
Outlaw Audio Speaker ECS 10 User Manual
P3 International Indoor Furnishings P7650 User Manual
Panasonic Digital Camera DMC FX48 User Manual
Panasonic Laptop CF31UPL1Y1M User Manual
Paradyne Digital Photo Frame 9783 User Manual