NEC Turkey Fryer NDA 30016 003 User Manual

ROAMER  
AN  
OPEN APPLICATION INTERFACE (OAI)  
INSTALLATION GUIDE  
NEC America, Inc.  
NDA-30016-003  
Revision 1.0  
February, 1997  
Stock # 241735  
 
Roamer Installation Guide  
CONTENTS  
TABLE OF CONTENTS  
Page  
Chapter 1 - Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Chapter 2 - Application Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Chapter 3 - Database Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Chapter 4 - MAT Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
NDA-30016 Revision 3.0  
Page i  
 
CONTENTS  
Roamer Installation Guide  
This Page Left Blank.  
Page ii  
NDA-30016 Revision 3.0  
 
FIGURES  
Roamer Installation Guide  
This Page Left Blank.  
Page iv  
NDA-30016 Revision 3.0  
 
Roamer Installation Guide  
Introduction  
Chapter 1 Introduction  
This guide provides specific field entries that need to be made in the process of  
installing and configuring Roamer. In addition to this guide, use the following  
manuals for this installation:  
Applications Manager (APM) Installation Manual – Contains step-by-step  
instructions for installing the software from the release media.  
Applications Manager (APM) Operations Manual – Explains how applications  
like Roamer are configured in the APM environment, using the entries and  
values provided in this guide.  
NEAX2400 System Manuals – Give very detailed explanations about the  
assignments that need to be made through the Maintenance Administration  
Terminal (MAT) commands on the NEAX2400.  
The installation and set up of Roamer involves the following processes. Each of  
these topics is covered in more detail in the remaining chapters of this book:  
Software Installation – Roamer software must first be loaded from the release  
media. Log in to the APM Platform Management Menu, select the Installation  
of Applications/Packages option, and follow the instructions provided in the  
APM Installation Manual to complete this part of the installation.  
Application Configuration – Roamer is internally supported by the APM and  
must be configured in the APM environment. Chapter 2 of this guide provides  
the information that must be entered into this APM configuration file. Use the  
instructions provided in the APM Operations Manual to make the entries  
provided in this section.  
Database Requirements – Roamer requires two application databases, one of  
which is constructed and maintained through the APM Database  
Administration option. The process begins with the creation of a master  
definition file and its related master database. An application definition file is  
constructed which enables the processing of the master files into an application  
database. Chapter 3 of this guide defines the information which must be  
included in these definition and database files. Use the instructions provided in  
the APM Operations Manual to make the entries contained in this section.  
Mat Assignments – Several data settings must be assigned at the NEAX  
Maintenance Administration Terminal (MAT) before Roamer will function.  
Chapter 4 of this guide specifies the necessary commands and the values at  
which they are to be set. Use the instructions provided in the NEAX2400 IMS  
System Manuals to make the entries contained in this section.  
NDA-30016 Revision 3.0  
Page 1  
 
 
Introduction  
Roamer Installation Guide  
A Note About the Logical and Physical Numbers Used By Roamer:  
Roamer uses logical and physical numbers to move users from one phone to  
another. A physical number (e.g., 4502) is the actual extension associated to a  
term  
D
or station through the NEAX2400 MAT. A logical number (e.g., 202) is an  
arbitrary number that is associated to a telephone user and that is controlled by the  
Open Application Interface (OAI). Physical numbers are not moved. Logical  
numbers move with the user. Thus, when a user indicates a move, Roamer finds the  
users logical number and reassigns it to the physical number of the new telephone.  
During installation, a logical number and a home physical number are assigned to  
each user in the Roamer database. Assignments are made at the NEAX2400 MAT  
terms  
which associates those physical numbers to specific D  
.
These two sets of numbers can be the same or different. If they are different and  
OAI processing is interrupted, Roamer may lose access to the physical numbers  
since OAI relocates users by their logical numbers. If the two numbering systems  
are the same and OAI processing is interrupted, all users can be restored to their  
physical home phone numbers by disabling the Free Location Feature through the  
NEAX2400 MAT.  
The installation process, including its presentation in this manual and reference to  
other manuals that you need to complete installation, is illustrated in Figure 1-1 on  
page 3:  
Page 2  
NDA-30016 Revision 3.0  
 
Roamer Installation Guide  
Introduction  
ROAMER  
INSTALLATION REQUIREMENTS  
Instructions in:  
Discussed in chapter:  
Software Installation  
APM Installation  
Manual  
Software Release Media  
APM Operations  
Manual  
Application Configuration  
Application Characteristics  
Primary Parameter Configuration  
OAI Facilities (Optional)  
OAI Configuration Parameters (Optional)  
User-Defined Parameters  
APM Operations  
Manual  
Database Requirements  
Master Definition File  
Master Database File  
Application Definition File  
Application Database  
NEAX2400 IMS  
System Manuals  
NEAX2400 IMS  
Maintenance Administration  
Terminal (MAT) Assignments  
AOKC (Assignment of OAI Key Codes)  
term  
AKY1 (Assignment of D  
Function Key)  
Figure 1-1 Installation Requirements  
NDA-30016 Revision 3.0  
Page 3  
 
 
Introduction  
Roamer Installation Guide  
This Page Left Blank.  
Page 4  
NDA-30016 Revision 3.0  
 
Roamer Installation Guide  
Application Configuration  
Chapter 2 Application Configuration  
Roamer is configured into the APM system using the Add function of the  
Application Configuration option on the APM System Administration menu:  
1. Enter the APM option from the APM Platform Management Menu.  
2. Enter the System Administrator password at the APM password screen.  
3. Enter the Application Configuration option from the System Administration  
menu.  
This section contains the information that should be entered to the configuration  
file for Roamer. For specific instructions on what these parameters mean and how  
to make these entries, use the APM Operations Manual.  
Step 1: Application Characteristics  
In adding Roamer to the APM Application Configuration file, define it as an OAI  
application that does not need a CRT or a communication queue, as shown below.  
Note: Entries for parameters that are marked with an asterisk (*) should be made ex-  
actly as they are shown. All other entries in this guide serve only as examples.  
Parameter  
Entry  
Description  
OAI Application (Y,N)  
Y
Y(es). Roamer is an OAI  
application because it  
communicates with the  
NEAX2400 using OAI  
processes.  
CRT Application (Y,N)  
N
N
(No). Roamer does not require a  
terminal screen that is of the  
same type as the one used by the  
APM.  
Communication Queue (Y/N)  
(No). Roamer does not need an  
IPC queue to communicate with  
other processes.  
NDA-30016 Revision 3.0  
Page 5  
 
     
Application Configuration  
Roamer Installation Guide  
Step 2: Primary Configuration Parameters  
On the APM Configuration Entry screen, make the entries shown below to the  
parameters indicated.  
Note: Entries for parameters that are marked with an asterisk (*) should be made ex-  
actly as they are shown. All other entries in this guide serve only as examples.  
Parameter  
Entry  
Description  
Application Name  
Roamer  
The name to be displayed in the  
APM menus. This name is  
displayed as it is entered here  
(i.e., capital letters, lower case,  
etc.).  
Executable Filename*  
Group*  
/oai/app/freeloc The path name of the executable  
file.  
(no entry)  
(Roamer is not a member of a  
group of applications.)  
Response Mode  
I
This is a default value since  
Roamer does not belong to a  
group.  
Initialization Batch  
Termination Mode*  
N
Roamer is not to be initialized  
automatically when the OAI  
system is initialized.  
M
Roamer is to receive a termination  
message rather than a kill or  
termination signal from the APM,  
when it is to terminate.  
Standard Output*  
/dev/null  
0
Roamers output is sent to this  
file.  
Number of Restarts  
Roamer may not be restarted by  
the APM if it terminates  
erroneously.  
Page 6  
NDA-30016 Revision 3.0  
 
 
Roamer Installation Guide  
Application Configuration  
Step 3: OAI Facilities  
According to instructions in the APM Operations Manual, designate the following  
NEAX2400 facilities for Roamer using the Facilities command on the  
Configuration Entry screen:  
FLF  
Free Location  
MRFR Mode Release (R)  
MSF OAI Mode Set  
TCFD Terminal Control (D)  
MRFI Mode Release (I)  
NTF Number Transfer  
TCFI Terminal Control (I)  
Note: The same MSF identification number (i.e., from 128 to 192) that is selected in the  
APM during Step 3 must be assigned to Roamer at the NEAX MAT. For more in-  
NDA-30016 Revision 3.0  
Page 7  
 
 
Application Configuration  
Roamer Installation Guide  
Step 4: Secondary OAI Configuration Parameters  
Using the OAI-Conf command on the APM Configuration Entry screen, make the  
entry shown for each of the following parameters required by Roamer. Use the  
instructions provided for this option in the APM Operations Manual:  
Parameter  
Entry  
Description  
Database Name #1*  
/oai/db/cur/  
roamerdb  
The path name of the database  
containing user information. The  
database filename roamerdb,  
shown here with its path, should  
be used as the name of the  
corresponding Application  
Definition File. For more  
information see Chapter 3,  
Timeout Value #1  
Timeout Value #2  
60  
20  
The number of seconds Roamer  
waits for user numeric input  
before it releases the Dterm  
.
The number of seconds Roamer  
waits for input of processing  
symbols such as # before it  
releases the Dterm  
.
Tenant Number  
1
This configuration applies to  
tenant No. 1.  
Source Link Name  
OAI1X25  
The port on the source side of the  
communication link. Entry  
should correspond to a Link  
Name in the APM System  
Configuration file.  
Destination Link Name  
Association Recovery  
PBX1X25  
10  
The port on the destination side of  
the communication link.  
The number of seconds Roamer  
waits before trying to re-establish  
an association with the NEAX  
that has been released.  
Page 8  
NDA-30016 Revision 3.0  
 
   
Roamer Installation Guide  
Application Configuration  
Step 5: User-Defined Parameters  
Make the following additional parameter entries through the UserDefined  
command on the APM Configuration Entry screen:  
Parameter  
Entry  
Description  
term  
User Defined #1  
3
The number of the Roamer D  
function key LED. This number  
must correspond to the function  
key assigned to Roamer at the  
NEAX MAT. For more  
information, see Chapter 4, MAT  
User Defined #2  
User Defined #3  
0
The default Route Restriction  
Class value.  
Y
Y(es), implement the Name  
Display feature; N (o), do not  
implement the Name Display  
feature and only display phone  
numbers.  
User Defined #4  
R
The way the privilege level is  
determined when there is more  
term  
than one user assigned to a D  
using the following characters:  
,
H = Highest Priority level  
among assigned users.  
L = Lowest priority level  
among assigned users.  
R = Most recently added user  
privilege level.  
User Defined #5  
Y
Y(es). Roamer is to reset all  
logical numbers to their home  
numbers at the designated Reset  
Time  
N(o). Roamer is not to reset the  
logical numbers daily. (See User  
User Defined #6  
3:00  
The Reset Time on a 24-hour  
clock at which all logical numbers  
are reset daily to their home  
numbers. This entry is valid only  
if User Defined #5 is set to Y(es).  
NDA-30016 Revision 3.0  
Page 9  
 
       
Application Configuration  
Roamer Installation Guide  
Description  
Parameter  
Entry  
User Defined #7  
0
The number of 30-minute  
intervals that the backup file will  
remain valid after a power failure.  
The largest allowable value is 48  
(24 hours). A longer delay must  
be indicated with the value 0  
(always valid).  
User Defined #8*  
/oai/app/data/  
roamerbu  
The name of the backup file that  
reflects the current status of  
assignments. This file preserves  
the current status of the Roamer  
system in the event of a power  
failure. If no backup is desired,  
leave this field blank.  
User Defined #9  
16  
The length of the User Name field  
in the Roamer database.  
This completes the configuration of Roamer in the APM. Now go to Chapter 3,  
Database Requirementson page 11 to create its database support.  
Page 10  
NDA-30016 Revision 3.0  
 
Roamer Installation Guide  
Database Requirements  
Chapter 3 Database Requirements  
Roamer uses the following two databases, only the first of which is created through  
the APM:  
The Roamer Database  
This database contains default assignment information. Each user ID is  
associated to telephone numbers and privileges, a tenant, and a reset option.  
This database is created through the APM and is configured as /oai/db/cur/  
roamerdb.  
The Backup Database  
This database reflects the current status of Roamer activity and is created and  
maintained by Roamer. It is configured in the APM as /oai/app/data/roamerbu.  
The Roamer database is created through the Database Administration option on the  
APM System Administration Menu and involves the following four-step process:  
Step 2 - Build  
Step 4 - Process  
Step 1 - Create  
Step 3 - Create  
Master Database File  
Application Database  
Master Definition File  
Application Definition File  
1. Create a Master Definition File: This step involves creating the master defini-  
tion file that defines the fields in the master database file.  
2. Build a Master Database File: This step involves entering data that was de-  
fined in the master definition file, in Step 1, into the master database fields.  
3. Create an Application Definition File: In this step, a definition file is created  
for the Roamer database. This file defines the formats by which data from the  
corresponding master file is to be converted to meet the needs of Roamer.  
4. Process the Application Database: In this step, the Process and Install Appli-  
cation Databases options on the APM Database Administration menu create the  
file that will be used by Roamer. When the Process option is activated, data is  
drawn from the master database and converted to the formats specified in the  
corresponding application definition file. The Install option is then activated to  
enable Roamer to copy its database into a working file.  
NDA-30016 Revision 3.0  
Page 11  
 
   
Database Requirements  
Roamer Installation Guide  
Instructions  
The information required in all four steps is provided in table below. Using this  
information with the procedural instructions provided in the APM Operations  
Manual, enter the Database Administration option on the APM System  
Administration Menu, and build the Roamer database. Any messages displayed  
during these steps are discussed in the Process and Error Messages chapter of the  
APM Operations Manual.  
The Roamer definition and database files must contain the information in the table  
below. Name the master definition file roamer_m and the application definition  
file roamerdb.  
Master Definition File  
Application  
Master  
Definition File  
Database  
Field Description  
Type Size  
Min. Max.  
Value Value  
Data Type  
Typical  
Entry  
User ID  
N
10  
0
99999 ASCII  
9999  
598241297  
User Name  
A
N
A
N
N
N
N
N
16  
5
ASCII  
Thompson  
Logical Number  
Exempt from Reset?  
RSC  
0
99999 Long Integer  
ASCII  
201  
n
2
2
0
0
0
0
0
15  
15  
Short Integer  
Short Integer  
1
SFC  
2
2
Physical Number  
Tenant Number  
Phone Type  
5
99999 Long Integer  
3200  
1
3
255  
10  
Short Integer  
Short Integer  
2
10  
Page 12  
NDA-30016 Revision 3.0  
 
 
Roamer Installation Guide  
Database Requirements  
Field Definitions  
User ID  
A unique 10-digit number that describes each user  
(e.g. social security number). The database is sorted by  
this field.  
User Name  
The 16-character user name that is displayed on the  
term  
D
.
Logical Number  
Exempt from Reset?  
The station number associated with the user name  
under Roamer control.  
Whether or not (Yes or No) this user is to be reset to a  
home phone when all system phones are reset. (See  
User-Defined Parameters #5 and #6 on page 9.)  
RSC  
The Route Restriction Class assignment of the user.  
The Service Feature Class assignment of the user.  
SFC  
Physical Number  
The station number associated with the phone under  
NEAX control.  
Tenant Number  
Phone Type  
The number of the tenant to which this physical  
number is assigned. (See Tenant Number on page 8.)  
term  
The equipment type of this phone. To indicate a D  
V, this field must be set to 10.  
Note 1: To enter an unassigned physical number into the database, list it under a User ID  
that is not associated with a user name and leave the Logical Number, Exempt  
from Reset?, RSC, and SFC fields blank. A user can be entered to the database  
without a phone assignment by leaving the Physical Number, Tenant Number, and  
Phone Type fields blank (e.g., security staff who are mobile and not assigned to a  
home phone).  
Note 2: Remember to complete Step 4, Process the Application Database, after entering  
the information above.  
NDA-30016 Revision 3.0  
Page 13  
 
 
Database Requirements  
Roamer Installation Guide  
This Page Left Blank.  
Page 14  
NDA-30016 Revision 3.0  
 
Roamer Installation Guide  
MAT Assignments  
Chapter 4 MAT Assignments  
This guide assumes that data settings that affect the operation of all OAI software  
on a system-wide basis have already been assigned on the NEAX Maintenance  
Administration Terminal (MAT). Such settings include system index values and  
assignment of Interface I/O Port Data in the Interface Processor (IP). For more  
information about these system data settings and the MAT commands described  
below, refer to the OAI Module Installation Manual for the NEAX2400 IMS, the  
NEAX2400 IMS Command Manual, the NEAX2400 IMS Job Specification Manual,  
and the NEAX2400 IMS Programming Manual.  
Assignment of MSF Function Key  
Roamer requires MAT assignment of the Mode Set Facility (MSF) to an OAI-  
terms  
assigned function key on all D  
affected by application. This process involves  
assigning the MSF and its Operation Code (Op-Code), configured for Roamer in  
the APM Application Configuration option, to one of the 14 OAI Key Codes. (The  
MSF Op-Codes range from 128 to 191. These are available for on-screen viewing  
through the Providers command in the APM Application Configuration option.)  
Each of the OAI Key Codes corresponds to an AKY1 Function Key Index (FKI)  
term  
value which is then assigned to the specific D  
illustrated below:  
function key. This process is  
PBX Correspondence of  
AOKC  
OAI  
AKY1  
Function  
Key Codes Key Indices  
MAT  
AOKC  
APM  
MAT  
1
2
3
< . . . .>  
< . . . .>  
< . . . .>  
34  
35  
36  
Application  
Configuration  
AKY1  
Command  
Command  
. . . . .  
4
5
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
Assignment of  
an OAI Key Code  
(between 1 and 14)  
to the Same  
Designation of  
Facility (Type)  
and its Op-Code  
for Use by  
. . . . .  
. . .  
Assignment of  
Corresponding  
MAT Function  
Key Index to a  
. . .  
6
7
Facility Type  
Roamer  
term  
specific D  
8
and Op-Code  
Function Key  
9
10  
11  
12  
13  
14  
Figure 4-1 OAI Function Key Assignment  
term  
A knowledge of the D  
stations in the NEAX system and which ones will have  
access to Roamer is necessary to making the following assignments:  
NDA-30016 Revision 3.0  
Page 15  
 
       
MAT Assignments  
Roamer Installation Guide  
AOKC Command: (Assignment of OAI Key Codes)  
This command is used to associate the MSF facility and its operation code that was  
configured in the APM for Roamer to one of the 14 OAI Key Codes in the MAT.  
1. Select an unused OAI Key Code from 1 to 14. To determine what Key Codes  
are available for assignment, use the LOKC command to list the AOKC Key  
Codes that are already assigned.  
2. Enter MSF as the facility to be assigned to the selected Key Code, using the val-  
ues on the screen.  
3. Enter the same Op-Code that was configured for Roamer in the APM. If neces-  
sary, retrieve it using the Providers command on the APM Configuration Entry  
screen.  
term  
AKY1 Command: (Assignment of D  
Function Key)  
terms  
This command is used to assign key data on the D  
Roamer.  
that are to have access to  
MAT Function Key Indexes #34 to #47 have been designated for use in the OAI  
system and correspond to the 14 OAI Key Codes as illustrated on the previous  
term  
page. The AKY1 command is used to assign a D  
function key to the specific  
MAT Function Key Index that, in turn, corresponds to the previously assigned OAI  
term  
Key Code. This command must be used to assign the function key on each D  
that is to be set up with access to Roamer.  
1. Enter the same tenant number that is configured for Roamer in the APM Appli-  
cation Configuration option (i.e., Tenant Number on page 8).  
term  
2. Enter the station number of the D  
signed.  
on which the function key is being as-  
term  
3. Enter to the D  
function key field the MAT Function Key Index that corre-  
sponds to the previously assigned OAI Key Code.  
Page 16  
NDA-30016 Revision 3.0  
 
   
Roamer Installation Guide  
MAT Assignments  
PBX Correspondence of  
AOKC  
OAI  
AKY1  
Function  
Key Codes Key Indices  
MAT  
AOKC  
APM  
MAT  
1
2
3
< . . . .>  
< . . . .>  
< . . . .>  
34  
35  
36  
Function  
Key #3  
Application  
Configuration  
AKY1  
Command  
Command  
. . . . .  
. . . . .  
. . .  
4
5
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
< . . . .>  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
OAI Key  
Roamer  
Function Key  
Index #43  
assigned to  
term  
. . .  
code #10 given  
configured  
MSF facility type  
and  
for  
6
MSF #129  
D
Function  
7
Op-Code #129  
Key #3  
8
9
10  
11  
12  
13  
14  
Figure 4-2 OAI Function Key Assignment Example  
In the example illustrated in Figure 4-2 above, MSF #129 is configured for Roamer  
and is assigned through the AOKC command to OAI Key Code 10. OAI Key Code  
term  
10 corresponds in the PBX to MAT Function Key Index 43. Each D  
in the  
system that is to access Roamer has function key 3 assigned to MAT Function Key  
Index 43 via the AKYI command. Now, for the duration of Roamers lifetime,  
term  
whenever a phone user presses function key 3 on any assigned D , MSF 129  
initiates communication with Roamer.  
Assignment of Free Location Feature  
ASYD Command:  
(Assignment of  
System Data)  
Make the following setting: Sys 1 Index 4 bit 4 Enter 1 (Yes) to enable the Free  
Location Feature.  
Note: If OAI goes down and the logical and physical number sets are the same, dis-  
abling this Free Location Feature disables all relocated logical numbers and only  
physical number assignments are accessible.  
NDA-30016 Revision 3.0  
Page 17  
 
     
MAT Assignments  
Roamer Installation Guide  
Assignment of Numbering Plan to Support Free Location Feature  
ANPD Command:  
(Assignment of  
Numbering Plan  
Data)  
This command is used to assign the actual first digit and the total number of digits  
for the set of physical numbers and again for the logical numbers. For instance, if  
the physical numbers are to be four digits long and lie in the range between 3000  
to 3999, the first digit is 3 and the total number of digits is 4. The logical numbers  
can be the same first digit and total number of digits. Remember, use the same  
tenant number that was configured for Roamer.  
ASPA Command:  
(Assignment of  
Special Access  
Code)  
This command is then used to associate the first digit, assigned through ANPD,  
with a kind of service. In ASPA, assign the logical and physical number(s) from  
ANPD to STN Station Number Level. Use the tenant number configured for  
Roamer and the same connection status index that was used in ANPD.  
ASDT Command:  
(Assignment of  
Station Data)  
Finally, this command is used to associate each physical (station) number from  
ANPD to the actual D , or station, Line Equipment Number (LENS) and  
telephone class. Again, use the same tenant number.  
term  
Note: Now that MAT assignments for logical and physical numbers are complete and  
correspond to the Roamer database, when a telephone user enters a logical num-  
ber, the NEAX performs the following processes:  
a. It reads the first digit and the total number of digits according to the ANPD  
assignment.  
b. It finds that the first digit is assigned to station service through the ASPA.  
c. It checks to see if the Free Location Feature (FLF) is enabled.  
d. If FLF is enabled, from its database Roamer provides the physical number  
associated to that logical number.  
e. Then the NEAX reads the ASDT to find out what actual Dterm is associated to  
that physical number and makes the change in assignment.  
Roamer is installed and ready to be initialized. Enter the APM Operations Menu  
and initialize Roamer through the Non-CRT Application Control option according  
to instructions provided in the APM Operations Manual.  
Page 18  
NDA-30016 Revision 3.0  
 
       

Miele Washer 09 845 470 User Manual
MTD Snow Blower E664F User Manual
MTX Audio Speaker T41012A User Manual
National Instruments Webcam NI 8352 User Manual
NorthStar Navigation Saw 701EU User Manual
Numark Industries Karaoke Machine KMX01 User Manual
NuTone Door C905 User Manual
Panasonic Blood Pressure Monitor EW BW30 User Manual
Panasonic Power Hammer EY6808 User Manual
Panasonic Stereo Receiver KX VC500 User Manual