NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Contents:
Product Description and Notes
Tilt Angle and Rotation
Page 1
Page 1
Page 2
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Display Dimensions w/Optional Speakers and Stand
Optional Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions with Optional Wall Mount
Control Codes
Product Description
Type:
LCD Display
1366 x 768
16:9
Screen Surface: Anti-Reflective
Resolution:
Aspect Ratio:
FCC:
Dimensions:
Weight:
36.2”(W) x 21.0”(H) x 5.5”(D)
64.8 lbs
Class B
Power Consumption: 175W (max)
BTU’s:
597 BTU/hour
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
LCD4020-2
Page 1 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Display dimensions
(PANEL DISPLAY AREA)
LCD4020-2
Page 3 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Display dimensions (cont.)
100mm MOUNTING HOLE PATTERN
AC Inlet
Power Switch
LCD4020-2
Page 4 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Dimensions with optional speakers and stand
LCD4020-2
Page 5 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Optional Table Top Stand Dimensions (ST-4020)
Table Top Stand
ST-4020
3.52
3.48
4.94
0.83
0.83
0.69
13.00
LCD4020-2
Page 6 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Optional Speaker Dimensions (SP4020-4620)
Optional Speakers
SP4020-4620
0.79
INPUT TERMINAL
LCD4020-2
Page 7 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Dimensions with Optional Wall Mount Kit (WMK3260-L)
LCD4020-2
Page 8 of 9
NEC Display Solutions of America, Inc.
LCD4020-2 Installation Guide
40” LCD Display
Rev 1.0
Control Codes
Function
Code Data
POWER
ON
OFF
VGA (15pin HD)
RGBHV
DVI
HDMI__________
VIDEO (Composite)
DVD/HD
S-Video
TV (Analog)
TV (Digital)
Option
01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0D
01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 31 03 73 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 32 03 70 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 33 03 71 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 34 03 76 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 35 03 77 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 43 03 01 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 37 03 75 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 39 03 7B 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 41 03 03 0D
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 44 03 06 0D
01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 31 03 09 0D
01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 32 03 0A 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 31 03 07 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 33 03 05 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 34 03 02 0D
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 35 03 03 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 31 03 70 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 32 03 73 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 33 03 72 0D
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 34 03 75 0D
01 30 41 30 45 30 41 02 30 30 31 45 30 30 30 31 03 01 0D
01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 31 03 77 0D
01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 32 03 74 0D
INPUT SWITCH
AUDIO MUTE
ON
OFF
PICTURE MODE sRGB
HIBRIGHT
STANDARD
CINEMA
SCREEN MODE: NORMAL
FULL
WIDE
ZOOM
EXECUTE
OFF
AUTO SETUP
FILM MODE
AUTO
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface:
RS-232C
Parity:
None
Communication: Asynchronous
Stop Bit: 1 bit
Baud Rate:
Data Length:
9600 bps
8 bits
Communication Code: Hex
PC Control Connector (D-Sub 9P)
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
LCD4020-2
Page 9 of 9
|